1. Introdución
The BEA Falcon is a sophisticated unidirectional motion sensor engineered to optimize the performance of automatic industrial doors. This sensor is designed to detect various targets and can be configured to filter out people, allowing for vehicle-only detection. This capability helps reduce door closing cycles by ignoring cross-traffic, leading to energy savings and improved operational efficiency.
The Falcon XL model, specifically, is suitable for mounting heights between 2 meters and 3.5 meters, providing a typical detection area of 4 x 2 meters. Its robust design ensures immunity against vibrations and environmental interferences, making it ideal for demanding industrial environments.
Figura 1: Fronte view of the BEA Falcon XL Industrial Door Sensor. This image shows the compact, black housing of the sensor, designed for robust industrial applications.
2. Características clave
- Energy-saving Unidirectional Motion Detection: Optimizes door closing cycles by detecting motion in one direction, contributing to significant energy savings.
- People Filter: Allows configuration to detect vehicles only, ignoring pedestrian traffic, which is crucial for specific industrial applications.
- Cross-traffic Filter: Eliminates unwanted detections from traffic moving perpendicular to the door, enhancing operational accuracy.
- Instalación Plug & Play: Simplifies setup with basic functions adjustable via push buttons or remote control.
- Rugged Housing: Designed with IP65 degree of protection, ensuring durability and resistance to dust and water ingress in harsh industrial environments.
- Inmunidade: Provides strong immunity against vibrations and environmental interferences, ensuring reliable performance.
3. Compoñentes do produto
The BEA Falcon sensor consists of several key components designed for easy installation and reliable operation. Refer to the diagram below for an overview of the main parts.
Figure 2: Diagram illustrating the main components of the BEA Falcon XL sensor.
- Push Buttons: For basic function adjustments.
- Front Face: The primary detection surface.
- Radar Antenna: Emits and receives microwave signals.
- Angle Indication: Visual indicator for tilt angle adjustment.
- Bracket: Mounting hardware for secure installation.
- Cable: For power and signal connection.
4. Configuración e instalación
The BEA Falcon XL sensor is designed for straightforward installation. Proper mounting and wiring are crucial for optimal performance and safety. It is recommended that installation be performed by qualified personnel.
4.1 Consideracións de montaxe
- Altura de montaxe: For the Falcon XL, the recommended mounting height is between 2 meters and 3.5 meters.
- Localización: Mount the sensor in a position that provides an unobstructed view of the detection area, typically above the industrial door.
- Axuste de ángulo: Utilize the adjustable bracket and angle indication to precisely aim the sensor's detection field. The sensor allows for 0° to 180° vertical tilt angles.
4.2 Cableado e alimentación
- Fonte de alimentación: The sensor operates on 12 V to 24 V AC ±10% (50 - 60 Hz) or 12 V to 24 V DC +30% / -10%. Ensure the power source matches these specifications.
- Conexión de saída: The sensor provides a relay output (free of potential change-over contact). Connect this to the door control system according to the system's requirements. Max. contact voltage: 30V AC/42V DC, Max. contact current: 1A (resistive), Max. switching power: 30 W.
- Lonxitude do cable: The sensor comes with a cable length of 10 or 15 meters for flexible installation.
4.3 Configuración inicial
Basic functions can be adjusted using the integrated push buttons or a compatible remote control. Refer to the detailed product manual (not provided in this summary) for specific programming steps for features like people filtering and cross-traffic filtering.
Figure 3: Illustration of the detection fields for the BEA Falcon sensor in an industrial door application. This diagram shows how the sensor can differentiate between pedestrian and vehicle traffic, optimizing door operation.
5. Funcionamento
Once properly installed and configured, the BEA Falcon XL sensor operates autonomously to detect motion within its defined field. The sensor's LED indicator provides visual feedback on its status.
5.1 Detection Mode
The sensor operates in motion detection mode. It identifies moving objects within its detection zone and triggers the door opening mechanism based on the configured parameters (e.g., presence of vehicles only).
5.2 Indicadores LED
- LED vermello: Indicates detection state and parameter indication.
- LED verde: Indicates value indication during configuration.
5.3 Optimización do rendemento
To ensure optimal performance, regularly verify that the detection field is clear of obstructions and that the sensor's lens is clean. The unidirectional detection and filtering capabilities contribute to efficient door operation and energy conservation.
6. Mantemento
The BEA Falcon XL sensor is designed for minimal maintenance due to its robust construction and IP65 rating. However, periodic checks are recommended to ensure continued optimal performance.
- Limpeza: Periodically clean the sensor's front face and housing with a soft, damp pano. Evite produtos de limpeza abrasivos ou solventes.
- Inspección: Visually inspect the mounting bracket and cable for any signs of wear, damage, or loosening. Ensure all connections are secure.
- Proba de funcionalidade: Regularly test the sensor's detection capabilities by simulating traffic to ensure it triggers the door correctly and that filtering functions are active as configured.
No user-serviceable parts are inside the sensor housing. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for any repairs.
7 Solución de problemas
This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified technician.
| Problema | Causa posible | Solución |
|---|---|---|
| O sensor non detecta movemento. | No power; obstructed detection field; incorrect sensitivity settings; sensor malfunction. | Check power supply and connections. Clear any obstructions. Adjust sensitivity settings. If problem persists, contact support. |
| Door opens for unwanted traffic (e.g., pedestrians). | People filter not activated or incorrectly configured; cross-traffic filter not active. | Verify and adjust the people filter and cross-traffic filter settings using push buttons or remote control. |
| O indicador LED non se acende. | No power; faulty LED; internal issue. | Check power supply. If power is present and LED remains off, the unit may require service. |
| Intermittent detection. | Loose wiring; environmental interference; sensor position shifted. | Inspect wiring connections. Ensure sensor is securely mounted and not vibrating. Check for new sources of interference. |
8. Especificacións técnicas
| Parámetro | Valor |
|---|---|
| Tecnoloxía | Radar Doppler de microondas |
| Frecuencia do transmisor | 24.150 GHz |
| Potencia radiada do transmisor | <20 dBm EIRP |
| Densidade de potencia do transmisor | <5 mW/cm² |
| Modo de detección | Movemento |
| Detection Zone (FALCON XL) | 4 x 2 m (typical at 30° and field size 9) |
| Min. Velocidade de detección | 5 cm/s |
| Vol. Subministracióntage | 12 V to 24 V AC ±10% (50 - 60 Hz); 12 V to 24 V DC +30% / -10% |
| Consumo máximo de enerxía | <2 W |
| Relé de saída | Free of potential change-over contact |
| Máx. Contacto Voltage | 30 V AC / 42 V DC |
| Máx. Contacto actual | 1A (resistivo) |
| Máx. Potencia de conmutación | 30 W |
| Sinal LED | Red: detection state, parameter indication; Green: value indication |
| Mounting Height (FALCON XL) | 2 m - 3.5 m |
| Grao de Protección | IP65 (IEC/EN 60529) |
| Rango de temperatura | -30 °C a +60 °C |
| Dimensións (L x A x A) | 127 mm x 102 mm x 96 mm |
| Ángulos de inclinación | 0° to 180° vertical |
| Materiais | ABS and Polycarbonate |
| Peso | 400 g |
| Lonxitude do cable | 10 ou 15 m |
9. Información de seguridade
Always observe the following safety precautions during installation, operation, and maintenance of the BEA Falcon XL sensor:
- Persoal cualificado: A instalación e o mantemento só deben ser realizados por persoal cualificado e autorizado.
- Desconexión de alimentación: Always disconnect power to the door system and sensor before performing any installation, wiring, or maintenance.
- Seguridade eléctrica: Adhere to all local and national electrical codes. Ensure proper grounding and wiring.
- Condicións ambientais: Do not expose the sensor to conditions outside its specified temperature and protection ratings.
- Pezas orixinais: Empregue só pezas de reposto orixinais ou homologadas.
10. Garantía e soporte
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your authorized BEA distributor. Keep your purchase receipt as proof of purchase.
