SEIKO QHP012WLH Non-Ticking Melodies Alarm Clock User Manual

Introdución

This manual provides detailed instructions for the SEIKO QHP012WLH Non-Ticking Melodies Alarm Clock. Please read this manual thoroughly before using the clock to ensure proper operation and to understand all features.

Contido do paquete

• SEIKO QHP012WLH Alarm Clock
• 3 pilas AA
• Manual de usuario (este documento)

Características do produto

• Modelo: QHP012WLH
• Tipo de visualización: Analóxico
• Movemento: Cuarzo de precisión
• Características especiais: Non-ticking quiet sweep second hand, selectable alarm melodies (Bird Song, Melodies, Beep), snooze function, adjustable alarm volume, light feature, luminous hour and minute hands.
• Fonte de enerxía: 3 pilas AA (incluídas)
• Dimensións: Aproximadamente 4.72 polgadas (largura) x 5.12 polgadas (altura) x 2.76 polgadas (profundidade)
• Material: Plástico

Configuración

1. Instalación da batería

The clock requires three (3) AA batteries for operation. These are included with your purchase.

1. Localiza a tapa do compartimento das pilas na parte traseira do reloxo.
2. Retire a tapa deslizándoa cara abaixo ou levantándoa.
3. Insert three AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Coloque a tapa do compartimento da batería de forma segura.

Imaxe: Traseira view of the clock, highlighting the battery compartment and control knobs.

2. Colocación inicial

Place the clock on a stable, flat surface such as a bedside table or desk. Ensure it is away from direct sunlight, extreme temperatures, or high humidity.

Image: The alarm clock positioned on a wooden surface, demonstrating typical placement.

Instrucións de funcionamento

Familiarize yourself with the controls located on the back and top of the clock.

Image: Rear controls of the clock, including time/alarm setting knobs and alarm switch.

1. Axuste da hora actual

1. Locate the "TIME" setting knob on the back of the clock.
2. Rotate this knob clockwise or counter-clockwise to move the hour and minute hands to the correct current time.
3. Ensure the time is set accurately, especially for AM/PM if applicable (though this is an analog clock, consider the 12-hour cycle for alarm setting).

2. Axustar a hora da alarma

1. Locate the "ALARM" setting knob on the back of the clock.
2. Rotate this knob to move the alarm hand to your desired wake-up time.
3. Ensure the alarm hand is precisely aligned with the desired hour and minute markings.

3. Activación/desactivación da alarma

On the back of the clock, there is an "ON/OFF" slide switch for the alarm.

• Slide the switch to "ON" to activate the alarm.
• Slide the switch to "OFF" to deactivate the alarm.

4. Selecting Alarm Sound

The clock offers multiple alarm sound options: Bird Song, Melodies, or a traditional Beep sound. The selection dial is typically located on the side or back of the clock.

1. Locate the alarm sound selection switch or dial.
2. Choose your preferred alarm sound:
• Bird Song: A gentle natural sound.
• Melodías: Includes "Dance of the Hours," "Morning from Peer Gynt," and "Waltz of the Flowers."
• Bip: A standard electronic alarm sound.

5. Axustar o volume da alarma

A volume control knob is provided to adjust the loudness of the alarm.

1. Locate the volume control knob, usually on the side or back of the clock.
2. Rotate the knob to increase or decrease the alarm volume to your preference.

6. Función de repetición da alarma

When the alarm sounds, press the large button located on the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes.

7. Light Feature

To illuminate the clock face in low light conditions, press the large button on the top of the clock. The light will remain on as long as the button is pressed, allowing for temporary viewing of the time.

Imaxe: Fronte view of the clock, showing the dial and the top button for snooze/light.

Mantemento

1. Limpeza

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the clock's finish and internal components.

2. Substitución da batería

When the clock's display dims, the alarm weakens, or the clock stops functioning, it is time to replace the batteries. Follow the battery installation steps in the "Setup" section.

• Always replace all three AA batteries at the same time.
• Non mesture pilas antigas e novas, nin tipos diferentes de pilas.
• Retire as pilas se non vai usar o reloxo durante un período prolongado para evitar fugas.

Resolución de problemas

Especificacións

• Número de modelo: QHP012WLH
• Marca: SEIKO
• Tipo de visualización: Analóxico
• Fonte de enerxía: 3 pilas AA (incluídas)
• Dimensións (W x H x D): 4.72" x 5.12" x 2.76" (12 cm x 13 cm x 7 cm aprox.)
• Peso: Aproximadamente 12.3 onzas (0.35 kg)
• Material: Plástico
• Características especiais: Non-ticking sweep second hand, selectable melodies, snooze, light, adjustable volume, luminous hands.

Garantía e Soporte

Información da garantía

This SEIKO QHP012WLH alarm clock is covered by a Garantía limitada do fabricante dun ano desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal.

A garantía non cobre:

• Damage caused by accident, misuse, abuse, alteration, or improper installation.
• Damage caused by unauthorized service.
• Damage from battery leakage.

Conserve o comprobante de compra para reclamacións de garantía.

Atención ao cliente

For technical assistance, warranty claims, or further inquiries, please contact SEIKO customer support. Refer to the official SEIKO websitio web ou na embalaxe do produto para obter a información de contacto máis actualizada.

You can visit the official SEIKO website for support and product information: www.seikoclocks.com