Introdución
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Guía de configuración
1. Desembalaxe e colocación
Retire con coidado todos os compoñentes da embalaxe. Coloque o prato xiratorio sobre unha superficie estable e nivelada, lonxe da luz solar directa, de fontes de calor e de vibracións excesivas. Asegúrese de que haxa unha ventilación axeitada arredor da unidade.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Montaxe
- Place the platter onto the spindle.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Conexións
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your ampterminal de terra do adaptador para minimizar o zumbido.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
Instrucións de funcionamento
1. Acendido/apagado
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Figure 4: Power switch location.
2. Reproducir un disco
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Carefully remove the stylus protector from the cartridge.
- Levante o brazo usando a panca de elevación do brazo.
- Mova suavemente o brazo sobre o suco inicial desexado do disco.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Conectividade Bluetooth
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Mantemento
1. Cleaning the Turntable
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Coidado do punteiro
- Regularly inspect the stylus for dust and debris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen son ou son moi baixo | Selección de entrada incorrecta activada amplifier; loose cables; volume too low. | Garantir amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Son zumbido | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Son con saltos ou distorsión | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| O prato non xira | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Especificacións
| Característica | Detalle |
|---|---|
| Dimensións do produto | 13.19 x 16.34 x 3.94 polgadas |
| Peso do elemento | 14.92 libras |
| ASIN | B0DHTXH32G |
| Número de modelo do artigo | T1 Evo with Preamp |
| Fabricante | Pro-Xect |
| Marca | Pro-Xect |
| Tecnoloxía de conectividade | Con cable |
| Velocidade de rotación máxima | 45 RPM |
| Característica especial | Velocidade axustable |
| Estilo | Pre. Incorporadoamp |
| Cor | Branco Satinado |
| Nome do modelo | T1 Evo with Preamp |
| Relación sinal-ruído | 70 dB |
| Data de primeira dispoñibilidade | 24 de setembro de 2024 |
Garantía e Soporte
Información da garantía
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Atención ao cliente
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject websitio web para obter información de contacto e recursos adicionais.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
