Manual de instrucións do panel de luz LED Troffer de 2x4 de Amico

1. Produto rematadoview

This manual provides instructions for the Amico 2x4 LED Troffer Panel Light. This fixture is designed for drop ceilings and features adjustable color temperature (CCT) and wattage settings, along with 0-10V dimming capabilities. It is suitable for various indoor commercial and institutional applications.

Image 1.1: Four Amico 2x4 LED Troffer Panel Lights, illustrating the product's appearance.

2. Información de seguridade

Lea atentamente todas as instrucións antes da instalación e o uso. Garde este manual para futuras consultas.

• Seguridade eléctrica: Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
• Conexión a terra: O aparello debe estar debidamente conectado a terra para evitar posibles descargas eléctricas.
• Voltage: Comprobar que a subministración voltage is compatible with the fixture's operating voltage (10 Volts DC for control, consult product label for main power).
• Só para uso en interiores: Este produto está deseñado para uso en interiores en lugares secos. Non o expoña á humidade nin a temperaturas extremas.
• Manexo: Handle the fixture with care to avoid damage to components.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Amico 2x4 LED Troffer Panel Light(s)
• Hardware de montaxe

4. Instrucións de instalación

The Amico 2x4 LED Troffer Panel Light is designed for easy installation in standard drop ceilings using its built-in clips and included mounting hardware.

4.1 Pasos previos á instalación

1. Desconexión de alimentación: Desconecte a alimentación no disyuntor antes de comezar calquera traballo eléctrico.
2. Inspección de accesorios: Unpack the fixture and inspect it for any damage. Do not install if damaged.
3. Preparación da abertura no teito: Ensure the ceiling grid opening is appropriate for a 2x4 (approximately 23.74" x 47.76") panel light.

4.2 Cableado

1. Connect the AC power supply wires to the fixture's input wires (Line, Neutral, Ground) according to local electrical codes.
2. If using 0-10V dimming, connect the dimming wires (purple and gray) from the fixture to the compatible 0-10V dimmer switch. Ensure polarity is correct.
3. Secure all wire connections with appropriate connectors.

4.3 Montaxe

1. Carefully lift the LED panel into the ceiling grid opening.
2. Engage the built-in clips on the sides of the fixture with the ceiling grid rails to secure the panel in place.
3. For added security, use the provided mounting hardware to attach the fixture to the building structure, if required by local codes or desired.

Image 4.1: Product dimensions (47.76"L x 23.74"W x 1.91"H) for installation planning.

5. Instrucións de funcionamento

The Amico LED Troffer Panel Light offers adjustable wattage and color temperature settings to customize your lighting environment.

5.1 Adjusting Wattage (Brightness)

The fixture features a toggle switch on the back to select the desired wattage, which directly affects the brightness (lumens). Choose from 25W, 30W, 35W, 40W, or 50W.

Image 5.1: Location of the 5-position power toggle switch for wattage axuste.

Image 5.2: Visual representation of brightness levels at 25W, 30W, 35W, 40W, and 50W.

5.2 Adjusting Color Temperature (CCT)

A separate toggle switch on the back of the fixture allows you to select the desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight White).

Image 5.3: Location of the 4-position CCT toggle switch for color temperature adjustment.

Imaxe 5.4: Ex.amples of different color temperatures (3000K, 3500K, 4000K, 5000K) in various environments.

5.3 Regulación de intensidade de 0-10 V

The fixture supports 0-10V dimming, allowing for smooth brightness adjustment from 0% to 100% when connected to a compatible 0-10V dimmer switch.

Image 5.5: Illustration of 0-10V dimming capability in a conference room setting.

6. Mantemento

The Amico LED Troffer Panel Light requires minimal maintenance.

• Limpeza: Asegúrese de que a electricidade estea desconectada antes de limpala. Limpe a luminaria cun pano suave, seco ou lixeiramente húmido.amp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Non hai pezas reparables polo usuario: The LED chips and driver are integrated and not user-serviceable. Attempting to open or modify the fixture will void the warranty.
• Vida útil: The fixture is designed for over 50,000 hours of continuous operation.

Image 6.1: Internal components of the LED Troffer Panel Light, highlighting its durable design.

7 Solución de problemas

If you encounter issues with your Amico LED Troffer Panel Light, refer to the following common troubleshooting steps:

Se estes pasos non resolven o problema, póñase en contacto co servizo de atención ao cliente.

8. Especificacións

9. Garantía e soporte

The Amico 2x4 LED Troffer Panel Light comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact Amico customer service.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Amico customer support through their official channels.