Manual do usuario do repetidor WI-FI UNIVERSAL STRONG 300

Introdución

The STRONG UNIVERSAL WI-FI REPEATER 300 is designed to extend the coverage of your existing wireless network. It operates on the 2.4GHz band, providing wireless speeds up to 300Mbps, suitable for web browsing, video streaming, and online communication. This device is universally compatible with any standard router or modem, offering a flexible solution to enhance your Wi-Fi signal.

Produto rematadoview

The STRONG UNIVERSAL WI-FI REPEATER 300 features a compact design with two external 3 dBi antennas for enhanced signal extension. It includes a LAN 10/100 Mbps Ethernet port for stable wired connections to devices such as laptops, smart TVs, or gaming consoles. The front panel includes LED indicators for power, Wi-Fi signal strength, and Ethernet activity, providing visual feedback on the device's status.

Imaxe: Fronte view of the STRONG UNIVERSAL WI-FI REPEATER 300, showing its white casing, two adjustable external antennas, and a row of green LED indicators on the right side. The 'STRONG' logo is vertically printed on the left side of the device.

Configuración

There are two primary methods for setting up your Wi-Fi Repeater:

1. WPS (Wi-Fi Protected Setup) Configuration:

   Press the WPS button on your existing router, then within two minutes, press the WPS button on the STRONG UNIVERSAL WI-FI REPEATER 300. The devices will automatically connect and configure the repeater settings. Use the intelligent signal indicator LEDs on the repeater to find the optimal placement for extended coverage.
2. Web Configuración da interface:

   Plug the repeater into a power outlet. Connect your computer or mobile device to the repeater's Wi-Fi network (usually named 'STRONG_XXXX' or similar). Open a web navegador e navegue ata 192.168.188.1. Follow the on-screen instructions to configure the repeater mode and network settings. This method allows for detailed customization of network parameters.

Modos de funcionamento

The STRONG UNIVERSAL WI-FI REPEATER 300 supports three operational modes for flexible use:

• Modo repetidor: This mode extends the coverage of your existing Wi-Fi network, eliminating dead zones. The repeater connects wirelessly to your main router and broadcasts the signal further.
• Modo de punto de acceso (AP): In AP mode, the device creates a new wireless access point from a wired Ethernet connection. This is useful for adding Wi-Fi capability to a wired network or creating a separate Wi-Fi network.
• Modo enrutador: This mode allows the device to function as a basic router, connecting to a modem via an Ethernet cable and creating a new Wi-Fi network.

Advanced wireless security protocols, including WPA2-PSK, are supported to protect your network from unauthorized access.

Mantemento

• Limpeza: Manteña o dispositivo limpo e libre de po. Use un pano suave e seco para limpar. Non empregue produtos de limpeza líquidos nin aerosois.
• Colocación: Ensure the repeater is placed in a well-ventilated area to prevent overheating. Avoid placing it near heat sources or in direct sunlight.
• Actualizacións de firmware: Comprobe periodicamente o fabricante websitio para actualizacións de firmware. A actualización do firmware pode mellorar o rendemento, engadir novas funcións e mellorar a seguridade.

Resolución de problemas

• Sen enerxía: Ensure the repeater is securely plugged into a working power outlet. Check the power LED indicator.
• Intensidade do sinal escasa: Relocate the repeater closer to your main router. Use the signal indicator LEDs to find a location where the signal is strong. Ensure antennas are properly oriented.
• Cannot Connect to Repeater's Wi-Fi: Verify that the repeater is powered on. Try resetting the repeater to factory defaults by pressing and holding the reset button (usually a small pinhole) for 5-10 seconds.
• Internet Access Issues: Check the connection between the repeater and your main router. Ensure your main router has internet access. Access the repeater's web interface (192.168.188.1) volverview its status and settings.
• Velocidades lentas: Ensure the repeater is placed optimally. Reduce interference from other electronic devices. Consider updating the repeater's firmware.

Especificacións

Información de seguridade

• Non expoña o dispositivo á auga nin á humidade.
• Non abra nin intente reparar o dispositivo vostede mesmo. Encargue calquera mantemento a persoal cualificado.
• Use só o adaptador de alimentación proporcionado co dispositivo.
• Manteña o dispositivo lonxe dos nenos.
• Garantir unha ventilación adecuada para evitar o sobrequecemento.