AIDA Single Pole Motion Sensor Light Switch User Manual

Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your AIDA Single Pole Motion Sensor Light Switch. This device is designed to enhance convenience and energy efficiency by automatically controlling lighting based on occupancy. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image: The AIDA Single Pole Motion Sensor Light Switch shown alongside its product packaging, highlighting its design and key features.

Información importante de seguridade

WARNING: RISK OF ELECTRIC SHOCK. Improper installation can be dangerous or illegal. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Apague a enerxía: Desconecte sempre a alimentación no disxuntor ou na caixa de fusibles antes de instalar ou realizar o mantemento do interruptor.
• Fío neutro necesario: This device requires a neutral wire for proper operation. If your electrical box does not have a neutral wire, this switch is not compatible.
• Single Pole Only: This switch is designed for single-pole control only and is not suitable for 3-way or multiple-way circuits.
• UL/CUL Certified: The switch is UL and CUL listed, ensuring compliance with safety standards.
• Vol. Operativotage: Ensure your electrical system operates at 120 Volts (AC).

Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• AIDA Single Pole Occupancy Motion Sensor Light Switch
• Placa de parede sen parafusos
• Wire Nuts (Terminal caps)
• Parafusos de montaxe
• Manual de instrucións (este documento)

Especificacións do produto

Image: A visual representation of the product dimensions and a detailed table of specifications for the AIDA motion sensor switch.

Image: A chart illustrating the universal compatibility of the AIDA motion sensor switch with various load types including LED/CFL, MLV, INV/HAL, Ballast, and Fan.

Configuración e instalación

Antes de comezar:

1. Apague a enerxía: Localiza o panel do disxuntor e desconecta a alimentación da caixa de interruptores na que traballarás. Verifica que a alimentación estea desconectada cun volímetro.tagprobador.
2. Identificar os cables: Carefully remove the existing wall plate and switch. Identify the following wires:
   • Line Wire (Black): Transporta a enerxía do disyuntor.
   • Load Wire (Black): Transporta enerxía á luminaria.
   • Cable neutro (branco): Required for this switch.
   • Cable de terra (verde ou cobre espido): For safety.
3. Confirm Neutral Wire: This switch requires a neutral wire. If you do not have a neutral wire (typically white) in your electrical box, this switch is not compatible.

Instrucións de cableado:

Follow the wiring diagram carefully. Use the provided wire nuts to secure connections.

Image: A detailed wiring diagram showing connections for the AIDA motion sensor light switch, including Line, Load, Neutral, and Ground wires. It explicitly states that a neutral wire is required and the switch is not suitable for 3-way or multiple-way circuits.

• Conecta o VERDE wire from the switch to your house's TERREO fío.
• Conecta o BRANCO wire from the switch to your house's NEUTRAL fío.
• Conecta o NEGRO wire from the switch to your house's LIÑA fío (quente).
• Conecta o VERMELLO wire from the switch to your house's CARGA wire (to the light fixture).

Important: Ensure all connections are secure and insulated with wire nuts. This switch is for single-pole applications only. Do not use in 3-way or multi-way circuits.

Montaxe do interruptor:

1. Carefully fold the wires and push the switch into the electrical box.
2. Secure the switch to the electrical box using the provided screws.
3. Attach the screwless wall plate.
4. Restablecer a enerxía no interruptor automático.

Image: A diagram showing the precise dimensions of the AIDA motion sensor light switch, its mounting bracket, and the screwless wall plate for easy installation.

Operating Instructions and Customization

The AIDA motion sensor switch offers various modes and adjustable settings to suit your needs.

Modos de operación:

• Occupancy Mode (Auto-On/Auto-Off): Lights automatically turn ON when motion is detected and OFF after a set delay when no motion is detected. Ideal for high-traffic areas like bathrooms, laundry rooms, and kitchens.
• Vacancy Mode (Manual-On/Auto-Off): Lights must be manually turned ON, but will automatically turn OFF after a set delay when no motion is detected. Suitable for bedrooms or TV rooms where you prefer manual control for turning on lights.

Configuración axustable:

The switch features internal dip switches for customizing settings. Carefully remove the faceplate to access these controls.

Imaxe: Primeiro plano view of the AIDA motion sensor switch's internal settings, showing dip switches for Adjustable Light Level (Timeout), PIR Sensitivity, and Ambient Light Sensor Mode.

• Adjustable Light Level (Timeout): This setting determines how long the light stays on after the last detected motion. Options typically include 30 seconds, 1 minute, 5 minutes, 15 minutes, or 30 minutes. Refer to the switch's internal labels for specific settings.
• Sensibilidade PIR: Adjusts the sensitivity of the Passive Infrared (PIR) sensor to detect motion. Settings range from Low (L) to High (H). A higher sensitivity detects smaller movements or movements at a greater distance.
• Ambient Light Sensor Mode: Controls how the switch reacts to ambient light.
  • Baixo/Alto: The switch will only turn on lights if the ambient light level is below a certain threshold (e.g., only turn on at night).
  • Desactivado: The ambient light sensor is disabled, and the switch will turn on lights regardless of ambient light.
  • Personalizado: Allows for more specific ambient light level adjustments.

Note: After adjusting any internal settings, reattach the faceplate securely.

Imaxe: Unha detallada view of the AIDA motion sensor switch with its cover removed, showing the dip switches for adjusting timeout, PIR sensitivity, and ambient light sensor mode.

Mantemento

The AIDA Motion Sensor Light Switch is designed for long-lasting, maintenance-free operation. To ensure optimal performance:

• Limpeza: Periodically wipe the switch and wall plate with a soft, damp pano. Non empregue produtos de limpeza abrasivos nin disolventes, xa que poden danar o acabado ou os compoñentes internos.
• Obstrución: Ensure the sensor lens is not obstructed by furniture, decorations, or other objects, as this can impair motion detection.
• Non hai pezas reparables polo usuario: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit beyond adjusting the dip switches.

Resolución de problemas

Garantía e Atención ao Cliente

AIDA products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AIDA websitio.

If you encounter any issues or have questions regarding your AIDA Single Pole Motion Sensor Light Switch, please contact our customer support team:

• Websitio: Visit the AIDA Store on Amazon (para información xeral do produto)
• Correo electrónico: Consulte a embalaxe do produto ou a información oficial websitio para correo electrónico de contacto.
• Teléfono: Consulte a embalaxe do produto ou a información oficial websitio para o número de teléfono de contacto.

Please have your model number (B0DM4SGNBQ) and purchase date ready when contacting support.