Introdución
Thank you for choosing the Hbada E2 Ergonomic Office Chair. This manual provides detailed instructions for assembly, operation, and maintenance to ensure you get the most comfortable and healthy experience from your new chair. Please read this manual thoroughly before assembly and use.
Información de seguridade
Always follow the instructions provided with the chair for proper assembly and use. Be cautious when adjusting the chair's position, especially when reclining, to avoid injury. Do not exceed the maximum weight capacity of the chair.
Contido do paquete
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included parts list for a complete overview.
- Base de cadeira con rodas
- Cilindro de elevación de gas
- Asemblea de asentos
- Montaxe de respaldo
- Reposacabezas
- Reposabrazos (esquerdo e dereito)
- Footrest (if applicable to your model)
- Ferraxes de montaxe (parafusos, arandelas, chave Allen)
- Manual de instrucións
Instrucións de montaxe
Assembly typically takes about 30 minutes and requires only the provided Allen wrench. Follow these steps carefully:
- Montar a base da cadeira: Insert the wheels into each leg of the chair base. Ensure they are securely fitted.
Image: The chair base with its five legs and wheels, ready for assembly.
- Install the Gas Lift Cylinder: Insert the air pneumatic cylinder into the center hole of the assembled chair base.
- Attach the Footrest (if applicable): If your model includes a footrest, attach it to the underside of the seat assembly as per the specific instructions. The footrest is designed to slide out and fold for use.
- Fixar os repousabrazos: Screw both armrests to the underside of the seat assembly. Ensure they are firmly secured.
Image: Close-up of the chair's underside, indicating where armrests are screwed into place.
- Fixar o respaldo: Screw the backrest support to the back of the seat assembly.
Image: The backrest assembly being connected to the seat, showing the screw points.
- Connect Seat and Base: Coloque con coidado o asento e o respaldo montados no cilindro elevador de gas, asegurándose de que estea centrado e estable.
- Install the Headrest: Slide the headrest onto the top of the backrest. It should click into place or be secured with a screw, depending on the design.
Image: The headrest component being installed onto the upper part of the chair's backrest.
Instrucións de funcionamento e axustes
The Hbada E2 chair offers multiple adjustments for personalized comfort:
1. Axuste de altura do asento
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the chair, or pull it up while standing to raise the chair. Release the lever to lock the height.
2. 6-Way Adjustable Lumbar Support
The backrest features a dynamic lumbar support system. This support can be adjusted in 6 ways:
- Forward and Backward Adjustment: 3 levels of depth adjustment.
- Axuste vertical: Move the lumbar support up or down to align with your lower back curve.
- Left-Right Suspension: The floating structure adapts to your movements, providing continuous support.
Image: A detailed diagram showing the 6-way adjustable lumbar support, highlighting its 2.36" up & down, 1.97" front & back, and 10° left & right movement capabilities.
3. Reposabrazos axustables en 3D
The armrests provide versatile support and can be adjusted in three dimensions:
- Axuste de altura: Up to 7.5 cm (2.95 inches) vertically.
- Forward and Backward Adjustment: Up to 5 cm (1.97 inches) horizontally.
- Rotación: Rotate 40 degrees left and right.
Image: A visual guide to the 3D ergonomic armrests, detailing 2.95" up & down, 1.97" front & back, and 40° left & right rotation.
4. 3D Adjustable Headrest and Reclining Function
The headrest and reclining function work together to provide full-body support:
- Axuste do repousacabezas: Adjust vertically up to 10 cm (3.93 inches), forward and backward up to 3 cm (1.57 inches), and rotate 60 degrees to support your neck.
- Función reclinable: The chair reclines up to 135 degrees with three lockable tilt angles (90°, 115°, 138°). Use the wire-controlled adjustment for one-touch operation without bending down.
Image: A diagram showing the 3D adjustable headrest, indicating 3.93" up & down movement and 60° rotation.
Image: Three illustrations demonstrating the chair's 3-level locking recline feature: 90° for comfortable office work, 115° for leisure, and 138° for short naps.
Imaxe: Primeiro plano view of the aluminum alloy wire-controlled adjustment mechanism, designed for easy one-touch operation.
Mantemento
Regular maintenance helps prolong the life and appearance of your Hbada E2 chair:
- Cleaning Mesh Fabric: The breathable mesh fabric can be cleaned with a damp pano e xabón suave. Evite produtos químicos agresivos.
- Limpeza do cadro: Wipe the alloy steel frame and plastic components with a soft, damp pano.
- Mantemento das rodas: Periodically check the wheels for hair or debris and clean as needed to ensure smooth movement.
- Apretar os fixadores: Cada poucos meses, comproba todos os parafusos e bulóns para asegurarte de que estean ben axustados. Apertaos de novo se é necesario para manter a estabilidade.
Imaxe: Unha ampliada view of the Flexmono Dragon Weave Mesh seat cushion, emphasizing its breathable structure for improved air permeability.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A cadeira non axusta a altura | Avaría do cilindro elevador de gas ou panca non activada. | Asegúrate de que a panca de axuste de altura estea completamente activada. Se o problema persiste, pode ser necesario substituír o cilindro elevador de gas. Ponte en contacto co servizo de atención ao cliente. |
| A cadeira tambalea ou séntese inestable | Parafusos soltos ou chan irregular. | Comprobe e aperte todos os parafusos de montaxe. Asegúrese de que a cadeira estea sobre unha superficie plana e uniforme. |
| Armrests are loose | Os parafusos de montaxe están soltos. | Tighten the screws securing the armrests to the seat. |
| O respaldo non se reclina nin se bloquea | Recline mechanism is jammed or not engaged. | Ensure the recline lock lever is disengaged to recline. If it doesn't lock, check for obstructions or contact support. |
Especificacións
- Marca: Hbada
- Modelo: E2
- Cor: Negro
- Dimensións do produto: 30.51" D x 22.24" W x 18.11" H
- Estilo de costas: Malla
- Rango de idade (descrición): Adulto
- Estilo do brazo: Padded, 3D Adjustable
- Material de recheo: Malla
- Material: Alloy Steel (Frame), Mesh (Seat/Back)
- Número de posicións reclinadas: 3 (up to 135 degrees)
- Inclinación: Si
- Factor de forma: Cadeira de oficina
Garantía e Soporte
Hbada is committed to providing high-quality products and customer satisfaction. Your Hbada E2 Ergonomic Office Chair comes with comprehensive support:
- Substitución de pezas: Parts are replaced, not repaired, for covered issues.
- Política de devolución de 30 días: Enjoy a 30-day return period without specific reasons required.
- Danado á chegada: Repair and replacement are guaranteed for items damaged during shipping.
- Atención ao cliente: For any questions, issues, or warranty claims, please visit the official Hbada store or contact their customer support directly.
Para máis información, visite o Hbada Store on Amazon.
