ANTEC CX700 ATX Mid Tower Gaming Case User Manual

Introdución

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your ANTEC CX700 ATX Mid Tower Gaming Case. Please read this manual carefully before beginning installation to ensure proper assembly and optimal performance.

Figure 1: ANTEC CX700 ATX Mid Tower Gaming Case. This image displays the overall design of the case, highlighting its panoramic glass panels and the vibrant ARGB fans visible through the transparent surfaces.

Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• ANTEC CX700 ATX Mid Tower Gaming Case
• Caixa de accesorios (parafusos, bridas, separadores)
• Manual de usuario (este documento)
• Pre-installed ARGB Fans (3 x 120mm reverse fans on PSU shroud, 2 x 120mm reverse fans on right side, 1 x 120mm fan in rear)

Configuración e instalación

Follow these steps for proper installation of your PC components into the CX700 case.

1. Preparación do caso

1. Eliminar os paneis laterais: The CX700 features tool-free panel design. Gently pull the tempered glass side panel (left) and the steel side panel (right) to detach them.
2. Caixa de accesorios: Locate the accessory box inside the case, which contains all necessary screws and mounting hardware.

Figura 2: Interior view of the ANTEC CX700 case. This image illustrates the spacious interior, fan mounting locations, and the layout for component installation.

2. Instalación da placa base

1. Instalar separadores: Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, ITX).
2. Montar a placa base: Carefully place your motherboard onto the standoffs and secure it with the provided screws.

3. Instalación da fonte de alimentación (PSU)

1. Posición da fonte de alimentación: Deslice a fonte de alimentación no compartimento correspondente na parte inferior traseira da caixa.
2. Fonte de alimentación segura: Fasten the PSU with screws from the rear of the case. The PSU mount includes EVA anti-vibration foams.

4. Instalación da unidade de almacenamento

The CX700 supports 2 x 3.5"/2.5" drive mounts and 2 x 2.5" drive mounts.

1. 3.5"/2.5" Drives: Utilize the drive cages located near the PSU shroud.
2. 2.5" Drives: Mount SSDs on the dedicated 2.5" brackets behind the motherboard tray.

5. Instalación da tarxeta gráfica (GPU)

1. Remove PCI Slot Covers: Remove the necessary reusable PCI slot covers from the rear of the case.
2. Insert GPU: Carefully insert your GPU into the PCIe slot on the motherboard and secure it with screws. The case supports GPUs up to 410mm in length (270mm with side radiator).

6. Xestión de cables

The CX700 provides 23mm of cable management space behind the motherboard tray. Route cables neatly using the provided cable ties and routing holes to ensure optimal airflow and a clean build.

Instrucións de funcionamento

Unha vez instalados todos os compoñentes e conectados os cables, podes acender o sistema.

• Botón de encendido: Located on the front access panel. Press to power on or off your system.
• Botón de control LED: Also on the front access panel. Use this button to cycle through various ARGB lighting modes for the pre-installed fans.
• Portos USB: The front panel includes 1 x USB 3.0 and 1 x Type-C 3.2 Gen 2 port for convenient peripheral connectivity.
• Conector de audio: A combined headphone/mic combo jack is available on the front panel.

Figure 3: Front I/O Panel of the ANTEC CX700. This image highlights the accessible ports and control buttons for user convenience.

Mantemento

Regular maintenance ensures the longevity and optimal performance of your gaming case.

• Limpeza do po: Periodically clean dust filters and interior components using compressed air or a soft brush. Dust accumulation can impede airflow and cooling performance.
• Limpeza de paneis: Wipe the tempered glass panels with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
• Comprobación da xestión de cables: Ensure cables remain neatly organized and do not obstruct airflow.

Resolución de problemas

Esta sección aborda problemas comúns cos que podes atoparte.

• Sen enerxía:
  • Check if the PSU is properly connected to the wall outlet and the motherboard.
  • Asegúrate de que o cable do botón de acendido da caixa estea conectado correctamente ao conector do panel frontal da placa base.
• Fans Not Spinning/ARGB Not Lighting:
  • Verify fan power cables are securely connected to the motherboard or fan controller.
  • Ensure ARGB cables are properly connected to the motherboard's ARGB header or the integrated LED controller.
  • Use the LED control button on the front panel to cycle through modes.
• Fluxo de aire deficiente/sobrequecemento:
  • Limpar os filtros de po e os compoñentes internos.
  • Ensure fans are oriented correctly for optimal airflow (intake/exhaust).
  • Check for obstructions to airflow inside the case.

Especificacións

Detailed technical specifications for the ANTEC CX700 ATX Mid Tower Gaming Case.

Garantía e Soporte

For warranty information and technical support, please visit the official Antec websitio web ou póñase en contacto co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.

Official Antec Websitio: www.antec.com