1. Produto rematadoview
Características clave
- 6000A Jump Starter: Capable of reliably jump-starting 12V vehicles (all gasoline engines and up to 12.0L diesel engines) in seconds, even in temperatures ranging from -20°C to 60°C. Provides up to 70 jump starts on a single charge. Suitable for automobiles, trucks, motorcycles, boats, lawnmowers, yachts, pickups, and snowmobiles.
- 150PSI Portable Air Compressor: Designed for rapid inflation of all tires from 0 PSI to 150 PSI. Features dual-cylinder technology for a fast inflation rate of 50 LPM (1.76 CFM).
- Digital Pressure Gauge & Automatic Shut-off: Equipped with a real-time LED digital pressure gauge for accurate readings. Allows selection of preset modes (car, bicycle, motorcycle, ball) and automatically stops inflation once the desired PSI is reached.
- Banco de enerxía de 21800 mAh: Functions as a power bank with Type-C input (5V/3A, 9V/2A) and dual USB outputs (5V/3A) to charge personal devices like cell phones and tablets. Recommended charging the jump starter with a 5V/2A adapter or higher.
- Deseño práctico: Features a unique 3.4-inch large LCD screen displaying operational status, battery level, and potential errors. Includes a 600 lumens LED light with 3 modes (constant light, strobe, SOS) for outdoor activities or emergencies. An additional small light is integrated for illuminating the inflation operation area.
- Smart Jump Cables: Provides 8 types of protection, including protection against overheating, overcharge, over-discharge, over-voltage, short-circuit, reverse polarity, and anti-interference.
Contido do paquete
- 1 x ACEZUK M06 Jump Starter with Air Compressor
- 1 cable de arranque intelixente
- 1 x Air Pump Hose
- 4 boquillas de gas
- 1 x cable de carga USB-C
- 1 x Manual de usuario
- 1 x Portable EVA Carrying Case

2. Información de seguridade
Lea e comprenda todas as instrucións de seguridade antes de usar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios e/ou lesións graves.
- Do not operate the air pump continuously for extended periods. If the tire compressor becomes hot, allow it to cool down for several minutes before resuming inflation.
- Avoid over-inflating tires, as this can cause damage. If a tire is over-inflated, gently press the tire valve to release excess air.
- Always ensure correct polarity when connecting the jump cables to the vehicle battery terminals. Incorrect connection can cause sparks, damage the device, or harm the user.
- Manteña o dispositivo e os seus accesorios fóra do alcance dos nenos.
- Do not attempt to disassemble, modify, or repair the device. This will void the warranty and may lead to hazards.
- Store the device in a cool, dry place, away from direct sunlight, moisture, and flammable materials.
- Use only the provided smart jump cables and accessories with this device.
3. Configuración
Cargando o dispositivo
Before initial use, fully charge the ACEZUK M06. It is recommended to charge the device every 3-4 months to maintain optimal battery health, especially if not in regular use.
- Connect the provided USB-C charging cable to the device's Type-C input port.
- Connect the other end of the USB-C cable to a 5V/2A or higher USB power adapter (not included).
- The LCD screen will display the charging status and battery level. Charge until the battery indicator shows 100%.
Inspección Inicial
Upon receiving your ACEZUK M06, perform a quick inspection:
- Check the device and all accessories for any visible damage.
- Asegúrate de que estean presentes todos os compoñentes listados na sección "Contido do paquete".
4. Instrucións de funcionamento
4.1 Puesta en marcha dun vehículo
Siga estes pasos para arrancar o seu vehículo con seguridade:
- Asegúrese de que o contacto do vehículo estea apagado e que o freo de estacionamento estea accionado.
- Insert the smart jump cable plug completely into the jump starter's designated port. The red and green lights on the clamp will flash alternately, indicating it's ready.
- Conecta o cl vermelloamp ao terminal positivo (+) da batería do vehículo.
- Conecta o cl negroamp ao terminal negativo (-) da batería do vehículo.
- If the indicator light on the smart cable flashes red and green alternately, and the vehicle does not start, press and hold the forced start button on the smart cable for 3 seconds until the light turns solid green. This bypasses safety checks for severely discharged batteries.
- Start the vehicle's engine within 30 seconds of the indicator light turning solid green.
- Unha vez que o vehículo arranque, retire inmediatamente o clamps from the battery terminals within 30 seconds. First, remove the black clamp, entón o cl vermelloamp.


Video 1: Demonstration of how to force start a car using a jump starter.
Video 2: Step-by-step guide on how to jump start a car.
4.2 Uso do compresor de aire
To inflate tires or other inflatables:
- Preme o botón ON/OFF para acender o dispositivo.
- Briefly press the air pump button (usually indicated by a tire icon) to enter inflation mode. The screen will display the current pressure.
- Press the 'M' (Mode) button to cycle through and select the appropriate inflation mode (e.g., car, bicycle, motorcycle, ball).
- Use the '+' and '-' buttons to adjust the desired target air pressure. You can also change the unit of measurement (PSI, BAR, KPA) if available.
- Connect the air pump hose securely to the tire valve or the appropriate gas nozzle for other inflatables.
- Press and hold the air pump button for 3 seconds to begin inflation.
- O compresor parará automaticamente unha vez que se alcance a presión preestablecida.
- Briefly press the air pump button again to exit inflation mode.


Video 3: Instructions on how to inflate a tire using the device.
4.3 Uso como batería externa
The ACEZUK M06 can charge your electronic devices:
- Connect your mobile phone, tablet, or other USB-powered device to one of the dual USB output ports (5V/3A) on the jump starter.
- O dispositivo comezará a cargar automaticamente o dispositivo conectado.

4.4 Uso da luz LED
A luz LED integrada proporciona iluminación para diversas situacións:
- Press the light button (usually indicated by a light bulb icon) to turn on the LED light.
- Press the button repeatedly to cycle through the 3 modes: constant light, strobe, and SOS signal.
- An additional small light is located on the bottom of the product to specifically illuminate the area around the tire valve during inflation.

5. Mantemento
Proper maintenance ensures the longevity and optimal performance of your ACEZUK M06:
- Almacenamento: Store the device in its portable EVA carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
- Recargando: If the device is not used regularly, recharge it every 3-4 months to prevent deep discharge and maintain battery health.
- Limpeza: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners. Ensure all ports are free from dust and debris.
- Coidado do cable: Inspect the smart jump cables and air pump hose regularly for any signs of wear or damage. Replace if necessary.
6 Solución de problemas
If you encounter issues with your ACEZUK M06, refer to the table below for common problems and their solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| O dispositivo non se acende. | Batería baixa ou sen carga. | Charge the device fully using the provided USB-C cable and a suitable adapter. |
| Vehicle not starting. | Incorrect cable connection, severely discharged battery, or vehicle issue. | Asegurar clamps are connected correctly (red to +, black to -). Check if the smart cable indicator light is solid green. If not, use the forced start function. If the issue persists, the vehicle battery might be beyond jump-starting or there's another vehicle problem. |
| O compresor de aire non se infla. | Hose not securely connected, incorrect pressure setting, or low device battery. | Verify the air pump hose is tightly connected to the tire valve. Ensure a target pressure is set. Check the device's battery level and recharge if necessary. |
| Air compressor overheats. | Continuous operation without cooling. | Stop the inflation process and allow the compressor to cool down for several minutes before resuming. Avoid prolonged continuous use. |
| Lectura de presión inexacta. | Incorrect unit of measurement selected. | Press the 'U' (Unit) button to cycle through and select the correct pressure unit (PSI, BAR, KPA). |
7. Especificacións
- Marca: ACEZUK
- Modelo: M06
- Pico de corrente: 6000 Amperes
- Capacidade da batería: 21800 mAh (ión de litio)
- Tipo de servizo de vehículos: Automotive (All Gas, up to 12.0L Diesel)
- Voltage: 12 voltios
- Presión do compresor de aire: 0-150 PSI
- Caudal de aire: 50 LPM (1.76 CFM)
- Entrada tipo C: 5V/3A, 9V/2A
- Saídas USB: Dual 5V/3A
- Luz LED: 600 Lumens (3 modes: Light/Strobe/SOS)
- Temperatura de funcionamento: -20°C a 60°C
- Peso do produto: 1.57 kg
- Dimensións do paquete: 21.1 x 17.3 x 14.4 cm
8. Garantía e soporte
ACEZUK is committed to providing high-quality products and excellent customer service.
- Garantía: This product comes with a 2-year FREE warranty from the date of purchase.
- Soporte técnico: Lifetime technical support is available for all ACEZUK M06 users.
- Atención ao cliente: Our customer service team is available 24/7 to assist you with any questions or concerns.
For warranty claims, technical assistance, or general inquiries, please refer to the contact information provided with your purchase or visit the official ACEZUK websitio para recursos de apoio.





