1. Introdución e finalview
The Telwin Drive 1800 Kompressor is a compact, multi-functional 12V lithium emergency starter designed for various vehicles including motorcycles, cars, campers, marine engines, and vans. This device integrates an air compressor for tire inflation, a power bank for electronic device charging, and a high-intensity LED light. It utilizes high-efficiency LiPo lithium batteries for quick and complete charging, ensuring a compact and lightweight design. This manual provides essential information for the safe and effective use of your device.
2. Información de seguridade
Lea todas as advertencias e instrucións de seguridade antes de usar este produto. O incumprimento destas instrucións pode provocar descargas eléctricas, incendios e/ou lesións graves.
- Protección ocular: Use sempre protección ocular cando traballe con baterías.
- Ventilación: Ensure adequate ventilation when charging or jump-starting to prevent accumulation of explosive gases.
- Ácido da batería: Battery acid is corrosive. If contact occurs, flush immediately with water and seek medical attention.
- Faíscas e chamas: Keep sparks, flames, and smoking materials away from the battery and jump starter.
- Frozen Batteries: Nunca intente poñer en marcha unha batería conxelada.
- Nenos: Manteña o dispositivo fóra do alcance dos nenos.
- Sobreinflación: Do not over-inflate tires or other items. Follow manufacturer's recommended pressure.
- Calor: The compressor and hose may become hot during prolonged use. Allow to cool before handling.
- Cargando: Use only the provided charging cable. Do not expose the device to rain or wet conditions.
3. Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- Telwin Drive 1800 Kompressor Unit
- Starting Cables (Jump Start Clamps)
- Cable de carga USB-C
- Removable Air Hose
- 3 boquillas de inflado
- Estuche de almacenamento
Figure 3.1: Included accessories for the Telwin Drive 1800 Kompressor.
4. Características e compoñentes do produto
Familiarize yourself with the main components of your Telwin Drive 1800 Kompressor.
Figura 4.1: Fronte view of the Telwin Drive 1800 Kompressor.
Figura 4.2: Traseira view with charging and output ports.
Figura 4.3: detallada view do panel de control.
- Pantalla LCD: Shows inflation modes, pressure readings, and battery status.
- Botóns de control: Power, mode selection, pressure adjustment (+/-), and LED light activation.
- Porto de arranque auxiliar: For connecting the jump start cables.
- USB-A Output (OUT: 5V==2.4A): For charging electronic devices.
- USB-C Input (IN: 5V==2A): For charging the Telwin Drive 1800 Kompressor unit.
- Conexión da mangueira de aire: For attaching the removable air hose.
- Luz LED: High-intensity light with multiple operating modes.
5. Configuración
5.1 Carga inicial
Before first use, fully charge the Telwin Drive 1800 Kompressor. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The LCD display will indicate charging status. Charging time may vary.
5.2 Conexión da mangueira de aire
To use the compressor function, securely screw the removable air hose into the designated port on the device. Ensure a tight connection to prevent air leakage.
6. Instrucións de funcionamento
6.1 Puesta en marcha dun vehículo
- Ensure the Telwin Drive 1800 Kompressor is sufficiently charged.
- Apague o contacto do vehículo e todos os accesorios.
- Conecta o VERMELLO positivo (+) clamp ao terminal positivo (+) da batería do vehículo.
- Conecta o NEGRO cl negativo (-)amp to a metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect directly to the negative battery terminal unless specified by the vehicle manufacturer.
- Asegúrese de que o clamps are securely attached and do not touch each other.
- Turn on the Telwin Drive 1800 Kompressor.
- Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
- Unha vez que o vehículo arranque, desconecte inmediatamente NEGRO cl negativo (-)amp primeiro, despois o VERMELLO positivo (+) clamp.
Figure 6.1: Jump starting a vehicle using the Telwin Drive 1800 Kompressor.
6.2 Uso do compresor de aire
- Ensure the air hose is securely attached to the device.
- Select the appropriate inflation nozzle and attach it to the air hose.
- Connect the nozzle to the item to be inflated (e.g., tire valve).
- Turn on the Telwin Drive 1800 Kompressor.
- Use the mode button to select the desired inflation mode (car, SUV, bicycle, inflatables, custom).
- Use the +/- buttons to set the target pressure. The LCD display will show the current and target pressure.
- Press the power button to start inflation. The compressor will automatically stop when the target pressure is reached.
- Disconnect the nozzle and air hose.
Figure 6.2: Inflating a car tire with the integrated compressor.
6.3 Uso como batería externa
To charge electronic devices, connect your device's USB charging cable to the USB-A output port (OUT: 5V==2.4A) on the Telwin Drive 1800 Kompressor. The device will automatically begin charging.
6.4 Uso da luz LED
Press the dedicated light button on the control panel to cycle through the LED light modes:
- Luz fixa: Para iluminación xeral.
- Luz estroboscópica: Para sinalizar ou chamar a atención.
- S.O.S. Mode: Flashes the international S.O.S. signal.
Figure 6.3: The LED light in operation.
7. Mantemento
- Recargando: For optimal battery life, recharge the device every 3-6 months, even if not in use.
- Limpeza: Wipe the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasives.
- Almacenamento: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
- Filtro de ar: Periodically check the air intake vents for dust or debris and clean if necessary to maintain compressor efficiency.
8 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O dispositivo non se acende. | A batería está esgotada. | Cargue o dispositivo completamente co cable USB-C. |
| O vehículo non arranca con axuda. | Cl incorrectoamp connection; vehicle battery too deeply discharged; device battery too low. | Verificar clamp connections (red to +, black to chassis); ensure device is fully charged; consult vehicle manual. |
| O compresor non se infla. | Air hose not securely attached; nozzle not properly connected; target pressure not set. | Check all connections; ensure nozzle is firmly attached; set target pressure on the display. |
| A luz LED non funciona. | Device battery is depleted; light button not pressed correctly. | Charge the device; press the light button firmly to cycle modes. |
9. Especificacións
- Modelo: Drive 1800 Kompressor
- Fabricante: Telwin
- Peso do artigo: 2 quilogramos
- Dimensións do paquete: 25.8 x 12.7 x 11 cm
- Número de modelo: 829575
- Máx Ampera: 1800 A
- Voltage: 12 voltios
- Composición da batería: Lithium-ion (LiPo)
- Compressor Max Pressure: Ata 3.5 bar
- Saída USB-A: 5V == 2.4A
- Entrada USB-C: 5V == 2A
10. Garantía e soporte
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Telwin websitio. Garda o comprobante de compra para reclamacións de garantía.
