Introdución
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulb. Please read this manual thoroughly before use and retain it for future reference.
This LED bulb is designed as a direct replacement for traditional 4-foot T5 High Efficiency (HE) 28W fluorescent lamps and requires an electronic ballast for operation. It is a Plug & Play solution, ensuring compatibility with specific existing fixtures.
Información importante de seguridade
- AVISO: Only use to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lamps).
- Verify ballast type (28W T5 HE Ballasts) before installation.
- Check ballast compatibility before using this product. Incompatible ballasts may cause improper operation or damage to the bulb.
- Always disconnect power before installation or removal.
- Non desmontes nin modifiques a lámpada.
- Asegúrate de que a lámpada estea ben asentada no dispositivo de fixación.
- This product is designed for indoor use in dry locations unless otherwise specified by the fixture.
Descrición da imaxe: A yellow warning label with black text. The text states: "WARNING Only used to replace 4' T5 HE (High Efficiency) 28W lamps (not HO lamps). Verify ballast type (28W T5 HE Ballasts) before installation. Check ballast compatibility before using product." Below the English text, the same warning is provided in French.
Contido do paquete
Your package contains 10 Philips 14T5HE/46-850/IF1/G/DIM 14W T5 LED Bulbs.
Descrición da imaxe: A close-up of the product packaging, indicating a "10_pack" of Philips LED tubes. The image shows the end of a box with a label confirming it contains 10 lamps.
Configuración e instalación
- Desconexión de alimentación: Antes de comezar a instalación, asegúrese de que a subministración eléctrica da luminaria estea completamente cortada no disyuntor.
- Verificar a compatibilidade do balastro: Confirm that your existing fixture uses a compatible 28W T5 High Efficiency (HE) electronic ballast. This LED bulb is a Plug & Play type and requires an electronic ballast. It is compatible with GE F28W/T5/850/Eco and Philips F28T5/850/Alto bulbs.
- Eliminar L existenteamp: Carefully remove the old fluorescent T5 lamp dende o aparello.
- Instalar bombilla LED: Insert the Philips 14T5HE/46-850/IF1/G/DIM LED bulb into the fixture's G5 bi-pin sockets. Ensure both pins on each end are fully seated.
- Instalación segura: Gently twist the bulb if necessary to ensure it is firmly in place and making proper electrical contact.
- Restaurar enerxía: Unha vez instalada a lámpada de forma segura, restableza a alimentación da luminaria no disyuntor.
- Proba de funcionamento: Turn on the light switch to verify the LED bulb is functioning correctly.
Descrición da imaxe: Un primeiro plano view of the end of a Philips LED tube, showing the G5 bi-pin base. The label on the bulb indicates "TYPE A LAMP" and "Use only with electronic ballasts."
Instrucións de funcionamento
The Philips 14T5HE/46-850/IF1/G/DIM LED bulb operates as a direct replacement for compatible T5 fluorescent lamps. Once installed in a fixture with a compatible electronic ballast and power is supplied, the bulb will illuminate when the fixture's switch is turned on.
- Funcionalidade regulable: This bulb is dimmable, provided the existing electronic ballast and dimmer switch are compatible with dimmable T5 LED lamps. Consult your ballast and dimmer specifications for compatibility.
- Activación instantánea: Unlike some fluorescent lamps, this LED bulb provides instant full brightness upon switching on, with no warm-up time.
Mantemento
Philips LED bulbs are designed for long-term, maintenance-free operation. Minimal maintenance is required.
- Limpeza: Ensure power is disconnected before cleaning. Gently wipe the bulb with a soft, dry, or slightly damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Substitución: When the bulb reaches the end of its operational life, replace it with another compatible Philips 14T5HE/46-850/IF1/G/DIM LED bulb. Follow the installation steps outlined in the "Setup and Installation" section.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A lámpada non se acende. |
|
|
| A lámpada parpadea ou atenúase inesperadamente. |
|
|
Especificacións
| Nome do modelo: | 14T5HE/46-850/IF1/G/DIM |
| Número de peza: | 476523 |
| Marca: | Signify (Philips) |
| Tipo de luz: | LED |
| Wattage: | 14 vatios |
| Equivalent Fluorescent: | 28W T5 HE (High Efficiency) |
| Base da lámpada: | G5 Bi-Pin |
| Temperatura de cor: | 5000 Kelvin |
| Voltage: | 120 Volts (Ballast Dependent) |
| Característica especial: | Dimmable (with compatible ballast/dimmer), Plug & Play |
| Lonxitude: | 46 polgadas |
| Material: | Plástico |
| Item Weight (per 10-pack): | 20 libras |
| GTIN: | 50046677476521 |
Descrición da imaxe: A close-up of the Philips LED tube, showing detailed specifications printed on the bulb itself. Information visible includes "14T5HE/46-850/IF1/G/DIM", "Use only with electronic ballasts", model numbers, and compliance marks like UL and RoHS.
Garantía e Soporte
For warranty information or technical support regarding your Philips LED bulb, please refer to the official Signify (Philips) websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra.
Fabricante: Philips (Signify)
Número de peza: 476523
