Homary 71" Electric Fireplace TV Stand

1. Introdución

Thank you for choosing the Homary 71" Electric Fireplace TV Stand. This media console is designed to accommodate TVs up to 75+ inches, featuring a 57.1'' electric fireplace insert with remote control and touch panel operation. Crafted from engineered wood with a marble veneer finish, it offers both elegant design and practical functionality, including heating capabilities and ampo almacenamento. Este manual proporciona información esencial para a montaxe, o funcionamento e o mantemento seguros do seu novo soporte de TV.

Figure 1: Homary 71" Electric Fireplace TV Stand with realistic flames.

2. Información de seguridade

• Lea todas as instrucións antes de usar este aparello.
• Do not operate any fireplace with a damaged cord or plug, or if the heater has malfunctioned or been dropped/damaged in any manner.
• Manteña os materiais combustibles, como mobles, almofadas, roupa de cama, papeis, roupa e cortinas a polo menos 0.9 m (3 pés) da parte dianteira do quentador.
• Desenchufe sempre a lareira cando non estea en uso.
• Non insira nin permita que entren obxectos estraños en ningunha abertura de ventilación ou escape, xa que isto pode provocar unha descarga eléctrica ou incendio, ou danar o quentador.
• Use sempre tomas de corrente polarizadas, con fusión a terra e correctamente.
• Asegúrate de colocar o soporte da TV sobre unha superficie estable e nivelada.
• Keep children and pets away from the fireplace and heating vents.

3. Contido do paquete

Your Homary Electric Fireplace TV Stand will be delivered in two cartons. Please ensure all parts are present before beginning assembly. Refer to the parts list image below for identification.

Figura 2: Máisview de todas as pezas incluídas no paquete.

4. Instrucións de montaxe

Follow these step-by-step instructions carefully. All screws and parts are labeled for easy identification. It is recommended to have two people for assembly.

Step 1: Prepare the Base Panels

Attach the LED strip to the designated top plate (Part 8) and secure the LED power cord using the provided clips and screws.

Paso 2: Montar os paneis laterais

Connect the side panels (Part 2 and 8) using screws (A) and wooden dowels (E) as shown. Ensure the LED cable passes through the designated hole.

Paso 3: Fixar o panel superior

Secure the top panel (Part 4) to the assembled side panels using screws (A) and wooden dowels (D).

Step 4: Complete the Side Structure

Repeat steps 1-3 for the other side of the TV stand, ensuring symmetry and proper alignment.

Step 5: Connect the Main Body

Connect the two side structures to the main central panel (Part 14) using screws (A) and wooden dowels (D).

Step 6: Install Support Legs

Attach the support legs (Part 15 and 17) to the bottom of the main central panel using screws (J) and wooden dowels (D).

Step 7: Attach Back Panels

Secure the back panels (Part 10) to the rear of the side structures using screws (F).

Step 8: Install the Top Shelf

Place the top shelf (Part 1) onto the assembled structure and secure it with screws (A).

Step 9: Connect LED Wires

Connect the LED wires from the side panels to the main power source, ensuring all connections are secure.

Step 10: Insert Fireplace Unit

Carefully slide the electric fireplace unit into the central opening of the TV stand. Secure it with screws (S).

Step 11: Place Decorative Crystals

Open the bag of decorative crystals and carefully place them along the bottom of the fireplace insert.

Step 12: Attach Fireplace Front Panel

Secure the fireplace front panel to the unit using screws (S).

Paso 13: Instalar portas de armario

Attach the hinges (N) to the cabinet doors (Part 11) and then secure the doors to the side cabinets using screws (G).

Step 14: Adjust Door Alignment

Adjust the hinges to ensure proper door alignment (left/right and front/back) for a seamless look.

Paso 15: conexións finais

Connect the main power cord of the fireplace to a suitable electrical outlet. Ensure all cables are neatly managed through the cable management holes.

Video de montaxe

Video 1: Detailed assembly instructions for the TV stand with fireplace.

5. Instrucións de funcionamento

Your electric fireplace TV stand can be operated using the included remote control or the touch panel located on the fireplace unit.

5.1. Remote & Touch Control

The remote control and touch panel allow you to adjust various settings of the electric fireplace.

Figure 3: Remote control and touch panel interface.

• Potencia: Turn the fireplace unit ON or OFF.
• Brillo da chama: Adjust the intensity of the flame effect. There are 5 types of flame brightness settings.
• Quentador: Activate the heating function. The heater can warm areas up to 400 square feet.
• Temperatura: Adjust the desired room temperature. The temperature can be set between 15°C - 45°C (62°F - 82°F).
• Temporizador: Set an automatic shut-off timer for the fireplace, ranging from 1 to 9 hours.

5.2. Flame Effects

The fireplace features realistic flame effects that can be customized. You can enjoy the flame effect independently without activating the heating function.

Figure 4: Remote control with flame brightness options.

5.3. Función de quecemento

The electric fireplace provides supplemental heating for rooms up to 400 square feet. The heat is emitted from the vent located above the flame display.

Figure 5: Heat output from the fireplace vent.

6. Mantemento

• Limpeza: Desenchufe sempre o aparello antes de limpar. Use un suave, damp cloth to wipe surfaces. Do not use abrasive cleaners or solvents.
• Desempolvado: Regularly dust the TV stand and fireplace unit to prevent dust buildup, especially around air vents.
• Coidado do cordón: Periodically inspect the power cord for any signs of damage. If damaged, discontinue use and contact customer service.

7 Solución de problemas

• Sen enerxía: Asegúrate de que o cable de alimentación estea conectado correctamente a unha toma de terra. Comproba o disyuntor da túa casa.
• Sen calor: Verify the heater function is activated and the temperature setting is above the current room temperature. Ensure air vents are not obstructed.
• O control remoto non funciona: Check the batteries in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the fireplace unit.
• Efecto de chama non funciona: Ensure the unit is powered on. If the flame effect is still not visible, contact customer support.

8. Especificacións

Figura 6: Dimensións do produto.

Figure 7: TV size compatibility.

9. Garantía e atención ao cliente

All Homary products come with comprehensive product support. For any inquiries or assistance, please do not hesitate to reach out to our customer service team. We aim to respond within 12 hours.

• Tipo de garantía: Limitado
• Contacto: For support, please refer to the contact information provided with your purchase or visit the official Homary websitio.