Introdución
The YEDOO Mula Y40 is a versatile adult scooter designed for various environments, from urban commuting to off-road exploration. It features a robust steel frame and lightweight aluminum components, ensuring durability and ease of handling. With a maximum load capacity of 150 kg, it is built to provide years of reliable use. The scooter is equipped with 20"/16" pneumatic tires for comfortable riding over varied terrain and an anti-slip footboard for enhanced safety.
This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your YEDOO Mula Y40 scooter. Please read it thoroughly before first use.
Información de seguridade
- Usa sempre casco e equipamento de protección axeitado (rodilleras, cóbadas, protectores de pulso) cando conduzas.
- Ensure all bolts, nuts, and quick-release levers are securely tightened before each ride.
- Check tire pressure and brake functionality before every use.
- Non exceda a capacidade de carga máxima de 150 kg.
- Minimum recommended user height is 150 cm.
- This scooter is recommended for users aged 12 years and older.
- Avoid riding in heavy traffic or on slippery surfaces.
- Sexa consciente da súa contorna e respecte todas as leis e regulamentos de tráfico locais.
- Do not modify the scooter in any way, as this may compromise its safety and void the warranty.
Configuración e montaxe
Your YEDOO Mula Y40 scooter comes partially assembled. Follow these steps to complete the setup:
1. Desembalaxe e comprobación de compoñentes
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. You should have:
- Scooter frame with rear wheel attached
- Roda dianteira
- Montaxe de manillar
- Kickstand (if not pre-attached)
- Assembly tools (usually an Allen key set and wrench)

Image: The YEDOO Mula Y40 adult scooter, showcasing its full assembly with front and rear wheels, handlebar, and footboard.
2. Attaching the Handlebar
- Insira a potencia do manillar no tubo da forquilla dianteira.
- Aliña o manillar coa roda dianteira.
- Tighten the stem bolts securely using the provided Allen key. Ensure the handlebar is firm and does not rotate independently of the front wheel.
3. Instalación da roda dianteira
- Carefully place the front wheel into the front fork dropouts.
- Ensure the brake pads are clear of the wheel rim.
- Secure the wheel using the quick-release lever or axle nuts. If using a quick-release, ensure it is fully closed and tight.
- Check that the wheel spins freely and is centered.

Imaxe: Fronte view of the YEDOO Mula Y40 scooter, highlighting the handlebar, front wheel, and brake system. This perspective is useful for handlebar alignment and front wheel installation.
4. Adjusting Brakes
The scooter is equipped with high-quality V-brakes. Ensure they are properly adjusted for optimal stopping power.
- Squeeze the brake levers to check for proper engagement. The brake pads should contact the rim evenly.
- Adjust cable tension if the brakes feel too loose or too tight.
- Ensure brake levers are easily accessible and provide firm, responsive braking.
5. Kickstand Installation (if applicable)
If your kickstand is not pre-installed, attach it to the designated mounting point near the rear wheel using the provided bolts. Ensure it is secure and allows the scooter to stand stably.

Imaxe: Lateral view of the YEDOO Mula Y40 scooter, showing the kickstand and the two-level rear fork. This view is helpful for understanding the kickstand position and footboard height adjustment.
Instrucións de funcionamento
1. Riding Position
- Place one foot firmly on the anti-slip footboard.
- Use your other foot to push off the ground, propelling the scooter forward.
- Maintain a balanced posture, keeping your body weight centered over the footboard.
- Periodically switch the pushing foot to reduce fatigue and improve balance.
2. Freada
- To slow down or stop, gently and evenly squeeze both brake levers.
- Avoid sudden, hard braking, especially with the front brake, as this can lead to loss of control.
- Practice braking in a safe, open area to get accustomed to the scooter's stopping distance.
3. Adjusting Footboard Height (Two-level rear fork)
The YEDOO Mula Y40 features a two-level rear fork, allowing you to adjust the footboard height for different terrains.
- Posición inferior: Ideal for road use, providing a lower center of gravity and easier pushing.
- Posición superior: Suitable for rougher terrain, increasing ground clearance to prevent scraping.
- Consult the scooter's frame near the rear wheel for instructions on how to adjust the fork position. This typically involves repositioning the rear wheel axle in different slots.
Mantemento
Regular maintenance ensures the longevity and safe operation of your YEDOO Mula Y40 scooter.
1. Presión dos pneumáticos
- Check tire pressure before each ride. The recommended pressure is usually indicated on the tire sidewall.
- Proper tire pressure improves ride comfort, efficiency, and reduces the risk of punctures.
2. Freos
- Inspect brake pads for wear regularly. Replace them if they are worn down.
- Ensure brake cables are not frayed and move freely. Lubricate if necessary.
- Keep brake surfaces (rims) clean and free of grease or dirt for effective braking.
3. Limpeza e almacenamento
- Limpa o scooter cun anuncioamp cloth and mild soap. Avoid using high-pressure washers directly on bearings.
- Dry the scooter thoroughly after cleaning to prevent rust.
- Store the scooter in a dry, cool place, away from direct sunlight and extreme temperatures.
4. Fixadores
- Comprobe periodicamente que todos os parafusos, porcas e mecanismos de liberación rápida estean ben axustados.
- Loose fasteners can lead to instability and potential accidents.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Os freos parecen débiles ou esponxosos | Loose brake cable, worn brake pads, dirty rims | Adjust brake cable tension, replace brake pads, clean rims |
| A scooter tira cara a un lado | Misaligned handlebar, uneven tire pressure, bent wheel | Realign handlebar, check and adjust tire pressure, inspect wheel for damage |
| Ruídos chirridos | Dry bearings, loose components, brake rub | Lubricate bearings, tighten all fasteners, adjust brakes |
| Difficulty pushing/slow ride | Low tire pressure, dirty wheel bearings | Inflate tires to recommended pressure, clean/lubricate wheel bearings |
Especificacións
- Modelo: YEDOO Mula Y40
- Cor: Negro
- Material principal: Marco de aceiro de aliaxe
- Tamaño da roda: Front 20 inches, Rear 16 inches (Pneumatic Tires)
- Capacidade de carga máxima: 150 quilogramos
- Idade recomendada do usuario: 12 anos ou máis
- Minimum User Height: 150 cm
- Peso do artigo: 8 quilogramos
- Dimensións do paquete: 110 x 65 x 16 cm
- Freos: High-quality V-brakes
- Características: Two-level rear fork for adjustable footboard height, Anti-slip footboard, Quick-release lever for wheels, Practical side kickstand (removable)
Garantía e Soporte
Specific warranty details for the YEDOO Mula Y40 scooter are typically provided at the point of purchase or within separate documentation included with the product. Please refer to your purchase receipt or contact the retailer for warranty information.
For technical support, spare parts, or further assistance, please contact the manufacturer, YEDOO, or your authorized dealer. Keep your proof of purchase handy when seeking support.




