1. Produto rematadoview
The Satco S11520 ST19 LED bulb combines classic design with modern energy efficiency. This 6-watt LED bulb is designed to replace a traditional 40-watt incandescent bulb, providing 500 lumens of warm 2700K illumination. Its vintage ST19 shape, clear glass housing, and flex gray coil filament offer a decorative aesthetic suitable for various fixtures. The bulb features a standard medium E26 base, is fully dimmable on 120V circuits, and is rated for use in enclosed fixtures and wet locations.
Figura 1: Fronte view of the Satco S11520 ST19 LED Bulb, showcasing its clear glass and flex gray coil filament.
Características principais:
- Vintage Deseño: ST19 shape with clear glass and gray flex coil filament for a classic aesthetic.
- Eficiencia enerxética: 6W LED replaces 40W incandescent, delivering 500 lumens.
- Luz branca cálida: 2700K color temperature for a comfortable and inviting glow.
- Regulable: Compatible with most standard 120V dimmer switches for adjustable light levels.
- Alta reprodución cromática: CRI of 93+ ensures accurate and vibrant color representation.
- Ampla compatibilidade: Medium E26 base fits most standard household fixtures.
- Durable: Rated for 15,000 hours of operation and suitable for enclosed fixtures and wet locations.
2. Información de seguridade
Please read and understand all safety instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Apagado: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Vol. Apropiadotage: Asegurar a subministración voltage is 120V AC, 60Hz. This bulb is designed for 120V circuits only.
- Compatibilidade de aparellos: Use only in fixtures designed for light bulbs with a medium E26 base.
- Peso: Do not exceed the weight limit of the fixture. This bulb weighs approximately 2.72 ounces.
- Manexo: Handle the bulb by its base, not the glass, to avoid breakage or damage.
- Temperatura: Do not use in environments where the operating temperature exceeds the bulb's rating (-4°F to +113°F / -20°C to +45°C).
- Eliminación: Desfágase das lámpadas usadas segundo a normativa local.
- Reguladores: When using with a dimmer, ensure the dimmer is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
3. Instalación
Follow these steps to safely install your Satco S11520 LED bulb:
- Apagar a enerxía: Before beginning, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Eliminar a lámpada antiga: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
- Inspeccionar o dispositivo de fixación: Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Instalar a nova lámpada: Gently screw the Satco S11520 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restaurar enerxía: Volva a conectar a corrente no disyuntor ou no interruptor de parede.
- Proba: Acenda o interruptor da luz para comprobar que a lámpada funciona correctamente.
Figure 2: Dimensions of the Satco S11520 ST19 LED Bulb, showing its E26 medium base.
This bulb is suitable for use in enclosed fixtures and wet locations, offering versatility for various indoor and covered outdoor applications.
4. Instrucións de funcionamento
The Satco S11520 LED bulb operates like a standard light bulb but offers dimming capabilities and energy efficiency.
- Activar/Desactivar: Use your existing wall switch to turn the light on or off.
- Función de atenuación: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve your desired brightness level. The bulb supports smooth dimming down to soft accent levels.
- Saída de luz: This bulb provides 360° omnidirectional lighting, ensuring consistent and balanced illumination in your space.
5. Mantemento
The Satco S11520 LED bulb requires minimal maintenance due to its long lifespan.
- Limpeza: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
- Substitución: This LED bulb has an average life of 15,000 hours. When replacement is needed, follow the installation steps in Section 3.
6 Solución de problemas
If you encounter issues with your Satco S11520 LED bulb, refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A lámpada non se acende. | Sen electricidade na luminaria, conexión solta ou lámpada defectuosa. |
|
| A lámpada parpadea ou zumba. | Regulador de intensidade incompatible ou fonte de alimentación inestable. |
|
| A saída de luz é demasiado tenue ou demasiado brillante. | Dimmer setting or incorrect bulb for application. |
|
If the problem persists after trying these steps, please contact Satco customer support.
7. Especificacións
Detailed technical specifications for the Satco S11520 ST19 LED Bulb:
| Atributo | Valor |
|---|---|
| Número de modelo | S11520 |
| Marca | Satco |
| Tipo de bulbo | LED |
| Tamaño da forma do bulbo | ST19 |
| Wattage | 6 vatios |
| Equivalente incandescente | 40 vatios |
| Brillo | 500 lúmenes |
| Temperatura da cor | 2700 Kelvin (Branco Cálido) |
| Índice de reproducción da cor (CRI) | 93+ |
| Tipo de base | E26 (medio) |
| Voltage | 120 V CA |
| Regulable | Si |
| Ángulo do feixe | 360° Omnidirectional |
| Vida Media | 15,000 horas |
| Temperatura de funcionamento | -4 °F a +113 °F (-20 °C a +45 °C) |
| Clasificación da localización | Wet Location Rated, Enclosed Fixture Rated |
| Dimensións (L x P) | 5.31" x 2.28" (134.87 mm x 57.91 mm) |
| Peso do elemento | 2.72 onzas |
| UPC | 045923115202 |
Figure 3: Product packaging displaying key specifications for the Satco S11520 ST19 LED Bulb.
Figure 4: Lighting Facts label, detailing brightness, energy cost, life, and light appearance for the Satco S11520 ST19 LED Bulb.
8. Garantía e soporte
The Satco S11520 LED bulb is backed by a 3 ano de garantía limitadaEsta garantía cobre defectos de materiais e fabricación en condicións de uso e mantemento normais.
For warranty claims, technical assistance, or any questions regarding your product, please contact Satco customer support. Keep your proof of purchase for warranty validation.
Satco Customer Support:
- Refer to the official Satco websitio para información de contacto.
- Provide the model number (S11520) when contacting support.
