ELEGRP Decorator Triple Rocker Switch Model 72611-BL Instruction Manual

1. Introdución

Thank you for choosing the ELEGRP Decorator Triple Rocker Switch. This manual provides essential information for the safe installation, operation, and maintenance of your new switch. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Información importante de seguridade

• AVISO: RISCO DE DESCARGA ELÉCTRICA. Desconecte sempre a alimentación no disxuntor ou na caixa de fusibles antes de instalar, reparar ou retirar o interruptor.
• Install in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.
• Usar só con arame de cobre ou revestido de cobre.
• Non usar en lugares húmidos.
• Asegúrese de que todas as conexións dos cables estean seguras.

2. Características do produto

The ELEGRP Decorator Triple Rocker Switch is designed for reliable performance and ease of use, offering control for three separate lighting loads from a single gang box.

• Rational Design: Features three smooth ON and OFF paddles with tactile feedback to prevent accidental operation.
• Construción de alta calidade: Made from impact-resistant polycarbonate thermoplastic and solid steel for extended durability.
• Autoconexión a terra: Includes a self-grounding clip for automatic connection in properly grounded metal wall boxes.
• Fácil instalación: Supports both back wiring and side wiring. Features break-off plaster ears for flush alignment and a shallow body design to fit standard junction boxes.
• UL & CUL Listed: Strictly tested to UL Standards for safety and quality assurance.

Figure 1: Key features of the ELEGRP Triple Rocker Switch, highlighting its durable construction and safety certifications.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes antes da instalación:

• 1 x ELEGRP Decorator Triple Rocker Switch (Model 72611-BL)
• 1 x Matching Wall Plate (Screw Wall Plate, Glossy Black)
• Parafusos de montaxe

4. Configuración e instalación

Follow these steps carefully to install your ELEGRP Triple Rocker Switch.

Pasos previos a la instalación

1. Apagar a enerxía: Locate the circuit breaker or fuse that controls the switch location and turn off the power. Verify power is off using a voltagprobador.
2. Eliminar o interruptor antigo: Retire con coidado a placa de parede e o interruptor existentes da caixa de parede. Desconecte os cables do interruptor antigo.
3. Inspeccionar o cableado: Identify the hot (line), neutral, ground, and load wires. If you are unsure, consult a qualified electrician.

Instrucións de cableado

The ELEGRP Triple Rocker Switch offers two wiring options: side wiring and back wiring.

Figure 2: Wiring options for the switch, illustrating connections for hot, neutral, and ground wires.

1. Fío de terra: Connect the green or bare copper ground wire from the wall box to the green grounding screw on the switch.
2. Hot (Line) Wire: Connect the incoming hot (line) wire to the black screw terminal. This switch uses a common feed for all three loads.
3. Cables de carga: Connect the three load wires (one for each light/fixture) to the three brass screw terminals.
4. Fío neutro: The neutral wire typically bypasses the switch and connects directly to the loads. Ensure proper neutral connections for your fixtures.

Montaxe do interruptor

1. Carefully fold the wires into the wall box, leaving enough space for the switch.
2. Insert the switch into the wall box and secure it with the provided mounting screws. Use the break-off plaster ears for flush alignment if needed.
3. Attach the included wall plate over the switch and secure it with the smaller screws.
4. Restaurar enerxía: Volva conectar a corrente no disxuntor ou na caixa de fusibles.
5. Proba de funcionamento: Test each rocker paddle to ensure proper ON/OFF functionality for its respective load.

Figure 3: Compact design and dimensions of the switch, ensuring compatibility with standard wall boxes.

5. Instrucións de funcionamento

The ELEGRP Decorator Triple Rocker Switch provides simple control for three independent lighting or appliance loads.

• Each of the three paddles operates independently.
• To turn a connected load ON, press the upper part of the corresponding paddle.
• To turn a connected load OFF, press the lower part of the corresponding paddle.

Figure 4: The triple rocker switch allows control of three separate loads from a single wall box, optimizing space.

6. Mantemento

The ELEGRP Triple Rocker Switch requires minimal maintenance.

• Limpeza: Para limpar o interruptor e a placa de parede, limpe cun pano suave eamp pano. Non empregue produtos de limpeza abrasivos nin disolventes, xa que poden danar o acabado.
• Inspección: Periodically check the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them promptly.

7 Solución de problemas

If you experience issues with your ELEGRP Triple Rocker Switch, refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, contact ELEGRP customer support or a qualified electrician.

8. Especificacións

9. Información da garantía

ELEGRP products are manufactured to high-quality standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELEGRP websitio.

10. Apoio

For technical assistance, product inquiries, or warranty claims, please contact ELEGRP customer support through the following channels:

• En liña: Visita o oficial ELEGRP Brand Store on Amazon.
• Correo electrónico: Refer to your product packaging or the brand store for specific contact email.