1. Introdución
This user manual provides essential information for the safe and efficient use of your Dyness 12V 100Ah LiFePO4 Lithium Battery. This battery is designed for various applications including RVs, camping, solar systems, off-grid living, home energy storage, and boating. It features A+ grade cells, a built-in 100A Battery Management System (BMS), and low-temperature charging protection, offering a long lifespan and reliable performance.
Figure 1: Dyness 12V 100Ah LiFePO4 Lithium Battery. This image shows the overall appearance of the battery unit.
2. Información de seguridade
Always read and understand all safety instructions before installing or operating the battery. Failure to follow these instructions may result in serious injury, property damage, or voiding of the warranty.
Precaucións xerais de seguridade:
- Do not disassemble, modify, or puncture the battery.
- Manteña a batería lonxe do lume, de fontes de calor e da luz solar directa.
- Non mergullo a batería en auga ou outros líquidos.
- Use only compatible chargers specifically designed for LiFePO4 batteries.
- Asegúrese de que haxa unha ventilación axeitada durante a carga e a descarga.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling the battery.
- Evite curtocircuítar os terminais da batería.
- Manter fóra do alcance dos nenos.
Protección de baixa temperatura:
The Dyness LiFePO4 battery includes a low-temperature charging protection feature. Charging will automatically disconnect when the battery's temperature drops below 32°F (0°C) and will resume at 41°F (5°C). Discharging will automatically cut off power at -4°F (-20°C) to protect the battery from damage.
Figure 2: Illustration of Low Temperature Cut-Off Protection. This image visually explains the temperature thresholds for charging and discharging protection.
3. Produto rematadoview
The Dyness 12V 100Ah LiFePO4 battery is engineered for superior performance and longevity. Key features include:
- Compacto e lixeiro: Significantly smaller and lighter than traditional lead-acid batteries, weighing only 25.3 lbs.
- Premium A+ Grade Cells: Ensures exceptional longevity and higher power density.
- BMS de 100 A integrado: Provides comprehensive protection and enhances reliability.
- Longa vida útil: Offers 4000+ deep cycles, lasting up to 6 times longer than standard lead-acid batteries.
- Aplicacións versátiles: Ideal for RVs, solar systems, off-grid setups, and marine use.
Components and Dimensions:
Figure 3: Dimensions of the Dyness 12V 100Ah LiFePO4 Battery (Group 31). The battery measures 13.0 inches (L) x 6.77 inches (W) x 8.43 inches (H) and weighs 25.3 lbs.
Figure 4: Illustration of the 100A Battery Management System (BMS). The BMS provides protection against overcharge, over-discharge, over-current, short circuit, high temperature, moisture, dust, and salt spray.
Figure 5: Depiction of High-Performance A+ Grade Cells. These cells contribute to the battery's long lifespan of up to 4000+ deep cycles.
4. Configuración
Entorno de instalación:
- Install the battery in a dry, well-ventilated area, away from direct sunlight and heat sources.
- Ensure the installation surface is stable and can support the battery's weight.
Connecting Batteries (Series and Parallel):
The Dyness 12V 100Ah LiFePO4 battery can be connected in series (up to 4 batteries for 48V systems) and in parallel (up to 4 batteries for increased capacity) to meet various energy requirements. Always ensure all batteries are of the same type, capacity, and state of charge before connecting them.
- Conexión paralela: Connect positive terminals to positive terminals and negative terminals to negative terminals. This increases the total capacity (Ah) while maintaining the voltage (12 V).
- Conexión en serie: Connect the positive terminal of one battery to the negative terminal of the next. This increases the total voltage (V) while maintaining the capacity (Ah).
Figura 6: Examples of battery configurations. The battery can be connected in various configurations to achieve desired energy banks, such as 1P1S (1.28kWh), 2P2S (5.12kWh), and 4P4S (20.48kWh).
Conexión de terminal:
The battery uses M8 terminals. Ensure all connections are secure and properly torqued to prevent loose connections and potential arcing.
5. Instrucións de funcionamento
Cargando:
For optimal battery health and fastest/safest charging, it is highly recommended to use a LiFePO4-specific charger. Recharging at a 0.2C rate (20A for a 100Ah battery) is recommended for optimal battery longevity.
- Connect the charger's positive lead to the battery's positive terminal and the negative lead to the battery's negative terminal.
- Ensure the charger settings are appropriate for a 12.8V LiFePO4 battery.
- Monitor the charging process, especially for the first few charges.
Descarga:
The battery's built-in BMS protects against over-discharging. However, it is good practice to avoid consistently discharging the battery to its absolute minimum to maximize its lifespan.
- Connect your load to the battery terminals, ensuring correct polarity.
- Do not exceed the maximum continuous discharge current specified in the specifications.
6. Mantemento
Comprobacións periódicas:
- Periodically inspect the battery terminals for corrosion or loose connections. Clean as necessary.
- Ensure the battery is kept clean and free of dust and debris.
- Comprobe a batería casing for any signs of damage or swelling. If damage is observed, discontinue use and contact support.
Almacenamento:
- If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC).
- Garde a batería nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Recargue a batería cada 3-6 meses durante o almacenamento a longo prazo para evitar unha descarga profunda.
7 Solución de problemas
The built-in 100A BMS provides extensive protection, which may cause the battery to shut down under certain conditions. Refer to the table below for common issues and their solutions.
| Problema | Causa posible | Solución |
|---|---|---|
| A batería non se está cargando | Over-discharge protection activated, low-temperature charging protection, charger issue, loose connection. | Check battery temperature (must be above 0°C/32°F). Verify charger functionality and connections. If deeply discharged, a specialized charger might be needed to reactivate. |
| Battery not discharging (no power output) | Over-discharge protection, over-current protection, short circuit protection, low-temperature discharging protection. | Reduce load. Check for short circuits in the system. Ensure battery temperature is above -20°C/-4°F. Disconnect load for a few minutes to allow BMS to reset. |
| Sobrequecemento da batería | Carga excesiva, mala ventilación, temperatura ambiente elevada. | Reduce load. Ensure adequate ventilation around the battery. Move battery to a cooler environment if possible. The BMS will activate over-temperature protection. |
| Unusual odors or swelling | Internal cell damage. | Immediately disconnect the battery from all loads and chargers. Do not attempt to use or repair. Contact Dyness customer support immediately. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Dyness customer support for assistance.
8. Especificacións
| Atributo | Valor |
|---|---|
| Marca | Dyness |
| Modelo | AR1.2 (12V 100Ah Group 31) |
| Tipo de batería | LiFePO4 (fosfato de ferro de litio) |
| Vol. Nominaltage | 12.8 V |
| Capacidade Nominal | 100 Ah |
| Enerxía | 1280 Wh |
| BMS incorporado | 100A |
| Vida útil | 4000+ Deep Cycles |
| Low-Temp Charging Protection | Charging off below 0°C (32°F), resumes at 5°C (41°F) |
| Low-Temp Discharging Protection | Discharging off below -20°C (-4°F) |
| Dimensións (L x W x H) | 13.0 x 6.77 x 8.43 polgadas (33.02 x 17.20 x 21.41 cm) |
| Peso | 25.3 libras (11.48 kg) |
| Tipo de terminal | Terminal M8 |
| Certificacións | UL, FCC, CE, RoHS, UN38.3 (as per product description) |
9. Garantía e soporte
Dyness is committed to providing high-quality products and excellent customer service. Your 12V 100Ah LiFePO4 battery is designed for a long lifespan, typically exceeding 10 years under proper use.
Atención ao cliente:
For any product-related issues, questions, or technical support, please do not hesitate to contact the Dyness support team. They provide professional technical support and online customer service with a fast response within 24 hours.
Please refer to the contact information provided with your purchase or visit the official Dyness websitio para obter as canles de soporte máis actualizadas.
Figure 7: Dyness customer service representatives ready to assist. The company offers responsive after-sales support.
