1. Produto rematadoview
This manual provides instructions for the ASD LED 36-inch Vanity Wall Mount Light Fixture (Model: A-LVF23-36D30CC-B). This linear light bar is designed for bathroom and vanity applications, offering adjustable color temperature (3CCT) and dimmable functionality. It is ETL Listed and Energy Star certified, ensuring safety and energy efficiency.
Figure 1: ASD LED 36-inch Vanity Light Fixture
Características principais:
- Brilliant & Efficient: Delivers 3150 lumens from 30 watts, providing bright illumination while saving energy.
- 3 Color Temperatures (3CCT): Select from 3000K (Warm White), 4000K (Cool White), or 5000K (Daylight) to suit your preference.
- Flicker-Free Dimming: Smoothly dims from 100% to 10% with most modern TRIAC dimmers (sold separately).
- Longa vida útil: Rated for 50,000+ hours of consistent performance.
- Certified & Reliable: ETL Listed for safety and Energy Star for efficiency. Rated for damp localizacións.
- Vivenda duradeira: Constructed with rust and impact-resistant materials.
- Lente acrílica: Provides even light distribution without flickering or dark spots.
2. Información de seguridade
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. Keep this manual for future reference.
- AVISO: Risco de descarga eléctrica. Desconecte a alimentación do fusible ou disyuntor antes de instalar ou reparar.
- All wiring connections must be in accordance with local and national electrical codes (NEC).
- Consulte a un electricista cualificado se non está seguro sobre o proceso de instalación.
- Asegúrese de que o dispositivo estea correctamente conectado a terra.
- Non manipule o dispositivo coas mans molladas.
- Non intente alterar o aparello de ningún xeito.
- This fixture is rated for damp locations. Do not submerge in water.
3. Que hai na caixa
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- Iluminación (1)
- Placa de montaxe (1)
- Screws (for mounting)
- Wire Nuts (for electrical connections)
4. Especificacións
| Especificación | Valor |
|---|---|
| Número de modelo | A-LVF23-36D30CC-B |
| Tamaño | 36 polgadas |
| Poder | 30 W |
| Brillo | 3150 lúmenes |
| Temperatura de cor (CCT) | 3000K / 4000K / 5000K (Selectable) |
| Voltage | 120 V |
| Regulable | Yes (TRIAC dimmers compatible) |
| CRI | 80.00 |
| Vida útil | 50,000 horas |
| Material | Acrylic, Metal, Plastic, Stainless Steel |
| Remate | Negro |
| Dimensións | 4.5 cm de longo x 36 cm de ancho x 3 cm de alto |
| Peso | 2.1 libras |
| Certificacións | ETL, Energy Star, cETL |
| Tipo de instalación | Flush Mount, Wall Mount |
Figura 2: Diagrama de especificacións do produto
5. Instalación
Follow these steps for proper installation. Ensure power is disconnected at the circuit breaker before starting.
- Preparación para a instalación: Pull the power supply wires out of the outlet box. Attach the mounting bracket to the outlet box (not included) using the mounting screws.
- Connect Wiring and Select CCT: Connect the wires: black to black, white to white, green to green. Secure the connections with wire nuts. Choose the desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by adjusting the switch position on the backside of the fixture.
- Asegure o accesorio: Place the fixture body over the mounting bracket. Insert the fixture screws and tighten to secure the fixture body on the surface.
Figure 3: Mounting Bracket Installation
Figure 4: Wiring and CCT Selection
Figure 5: Fixture Attachment
For a full, detailed installation sheet, please refer to the official guide: Download Full Installation Guide (PDF)
6. Instrucións de funcionamento
Selección da temperatura de cor (3CCT)
The fixture allows you to choose between three color temperatures: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). This selection is made via a switch located on the backside of the fixture during installation. Once installed, the chosen color temperature will remain active until manually changed by accessing the switch again.
Figure 6: Color Temperature Options
Funcionalidade de atenuación
This fixture is designed to be dimmable from 100% down to 10% brightness. To utilize the dimming feature, you must connect the fixture to a compatible TRIAC dimmer switch (sold separately). Ensure the dimmer switch is rated for LED lighting to prevent flickering or damage.
Figure 7: Dimmable Light Output
Encendido/apagado
Operate the light fixture using a standard wall switch connected to the electrical circuit. Ensure the switch is compatible with the fixture's electrical requirements.
7. Mantemento
The ASD LED Vanity Light Fixture requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Limpeza: Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic lens.
- Substitución da lámpada: This fixture uses integrated LED technology and does not require bulb replacement. The LEDs are designed to last for the entire lifespan of the product.
- Inspección: Inspeccione periodicamente a instalación para detectar calquera sinal de danos ou conexións soltas. Se atopa algún problema, desconecte a alimentación e consulte cun electricista cualificado.
8 Solución de problemas
Se tes problemas coa túa lámpada, consulta os seguintes problemas e solucións comúns:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | No power to the fixture; Loose wiring connection; Faulty switch or circuit breaker. | Check power supply at the circuit breaker. Ensure all wire connections are secure. Test the switch or circuit breaker. |
| Luz parpadea | Incompatible dimmer switch; Loose wiring connection; Voltage flutuacións. | Ensure a TRIAC LED compatible dimmer is used. Check and secure all wiring connections. Consult an electrician for voltage cuestións. |
| Temperatura de cor incorrecta | CCT switch set incorrectly during installation. | Disconnect power, access the CCT switch on the back of the fixture, and adjust to the desired setting. |
| A luz é demasiado débil ou demasiado brillante | Dimmer setting; Incorrect CCT selection. | Adjust the dimmer switch. If not using a dimmer, ensure the CCT is set to a preferred brightness level. |
Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente.
9. Garantía e soporte
This ASD LED Vanity Light Fixture is backed by a Garantía de 5 ano sen complicacións. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical assistance, please contact our friendly and responsive US-based support team.
For more information or to contact support, visit the official ASD Store: ASD Lighting Corporation Store
10. Aplicacións do produto
The versatile design and adjustable lighting features of the ASD LED Vanity Light Fixture make it suitable for various indoor and covered outdoor applications, including:
- Baños
- Dormitorios
- Corredores
- Cociñas
- Over Mirrors
- Iluminación de armarios
Bathroom Application
Bedroom Application
Hallway Application
Kitchen Application
