ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

1. Introdución

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

Imaxe: Máis deview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Características do produto

• Control mans libres: Automatically detects presence and ambient light to activate or deactivate lights.
• Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
• Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
• Compatibilidade universal: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
• Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
• Fácil instalación: Fits standard junction boxes and requires a neutral wire.
• Deseño duradeiro: Constructed with tough thermoplastic housing for impact and scratch resistance.

Imaxe: Detallada view of the product features and adjustable settings on the dimmer switch.

3. Información de seguridade

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

• Este dispositivo está destinado á instalación de acordo co Código Eléctrico Nacional e as normativas locais.
• Recoméndase que un electricista cualificado realice esta instalación.
• Use só fíos de cobre.
• É necesario un cable neutro para un funcionamento correcto.
• This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Contido do paquete

• ECOELER Motion Sensor Dimmer Switch
• Placa de parede
• Instrucións de instalación (este manual)
• Parafusos de montaxe
• Tapas de cableado

Image: Product dimensions and included accessories.

5. Especificacións

Image: Universal compatibility with various bulb types and their wattage valoracións.

6. Instalación

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Preinstalación

1. Apagar a enerxía: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltagprobador.
2. Eliminar o interruptor antigo: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
3. Identificar os cables: Identify the following wires in your electrical box:
   • Hot (Line) Wire: Transporta a enerxía do disyuntor.
   • Cable de carga: Conéctase á luminaria.
   • Fío neutro: (Required) Typically white, often capped together with other neutral wires.
   • Fío de terra: (Recommended) Typically bare copper or green.

6.2 Instrucións de cableado

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

• Conecta o Negro wire from the switch to the Hot (Line) wire from the wall.
• Conecta o Vermello wire from the switch to the Carga wire from the wall.
• Conecta o Branco wire from the switch to the Neutral wire from the wall.
• Conecta o Verde wire from the switch to the Terra wire from the wall.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

1. Carefully push all wired connections into the electrical box.
2. Mount the switch into the electrical box using the provided screws.
3. Coloque a placa de parede.
4. Volva a conectar a corrente no disyuntor.