1. Produto rematadoview
The JONSBO N10 is a compact Mini ITX PC case designed for small form factor (SFF) builds. It features an aluminum alloy shell with a sandblasted finish and North American walnut trim, offering both durability and aesthetic appeal. The case supports Mini ITX motherboards and 1U FLEX power supplies up to 150mm in length. Its design allows for flexible placement in both standing and lying positions.
Image 1.1: The JONSBO N10 Mini ITX PC Case in a typical desktop setup, showcasing o seu tamaño compacto e deseño.
Image 1.2: The JONSBO N10 case positioned on a desk, highlighting its small footprint and integration into a workspace.
Vídeo 1.1: Produto oficial rematadoview of the JONSBO N10/NV10 Mini ITX PC Case, demonstrating its features and design.
Características principais:
- Deseño compacto: Portable capacity of approximately 4.5L, suitable for small spaces.
- Materiais Premium: Constructed from aluminum alloy with a sandblasted finish and North American walnut trim.
- Colocación flexible: Can be used in both standing and lying orientations.
- Refrixeración eficiente: Features a multi-component perforated design for enhanced heat dissipation and improved airflow. Includes two 5000 RPM 40mm high-speed fans for auxiliary hard drive cooling.
- Soporte de almacenamento: Accommodates up to four 2.5-inch SSDs.
- Compatibilidade da fonte de alimentación: Supports 1U FLEX power supplies with a maximum length of 150mm.
- Fácil mantemento: The upper cover is equipped with an easy-to-pull handle for convenient disassembly and maintenance.
- E/S frontal: Includes a USB 3.2 Gen 2 Type-C port.
- Soporte de radiador: Compatible with air coolers up to 38mm in height.
2. Configuración e instalación
This section provides general guidelines for installing components into your JONSBO N10 PC case. Always refer to the specific manuals for your motherboard, power supply, and other components for detailed instructions.
2.1 Case Disassembly
To begin installation, the case needs to be opened. The JONSBO N10 features a quick-release design for the top plate, allowing for easy access to the internal components.
- Locate the easy-to-pull handle on the upper cover.
- Gently pull the handle to release the top cover.
- Remove the top cover to access the interior of the chassis.
Image 2.1: The JONSBO N10 case with its top panel lifted, demonstrating the tool-free access for installation and maintenance.
2.2 Instalación da placa base
The JONSBO N10 is compatible with Mini ITX motherboards. Install your motherboard into the designated area within the chassis, securing it with the appropriate screws.
Imaxe 2.2: Interna view of the JONSBO N10 case showing a Mini ITX motherboard and CPU cooler installed.
2.3 Instalación da fonte de alimentación
The case supports 1U FLEX power supplies with a maximum length of 150mm. The power supply is typically installed from the bottom of the chassis.
- Orient the 1U FLEX power supply correctly.
- Slide the power supply into its designated slot from the bottom of the case.
- Secure the power supply using the provided screws.
Image 2.3: Diagram illustrating the installation process of a 1U FLEX power supply into the JONSBO N10 case from the bottom.
2.4 Instalación do dispositivo de almacenamento
The JONSBO N10 provides support for up to four 2.5-inch SSDs. A dedicated bracket is used for mounting these drives.
- Attach the 2.5-inch SSDs to the provided storage bracket.
- Slide the filled bracket into its designated position within the chassis.
- Asegúrese de que o soporte estea firmemente fixado.
Image 2.4: Diagram demonstrating the installation of 2.5-inch SSDs into the JONSBO N10 case using a dedicated bracket.
2.5 Instalación do ventilador
The N10 case includes two 40mm high-speed fans for auxiliary hard drive cooling, located at the rear window. Ensure these fans are properly connected to your motherboard's fan headers.
Imaxe 2.5: Traseira view of the JONSBO N10 case, highlighting the placement of the two 40mm fans for hard drive cooling.
3. Instrucións de funcionamento
Once all components are installed and the case is reassembled, you can begin operating your PC.
- Connect all necessary external peripherals (monitor, keyboard, mouse, etc.) to the motherboard's I/O ports.
- Conecte o cable de alimentación á fonte de alimentación e despois a unha toma de corrente.
- Press the power button located on the front panel of the case to turn on your PC.
- Utilize the front USB 3.2 Gen 2 Type-C port for connecting compatible devices.
Imaxe 3.1: Fronte view of the JONSBO N10 case, showing the walnut trim and the front I/O port.
4. Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.
4.1 Limpeza
- Exterior: Wipe the aluminum alloy and walnut surfaces with a soft, dry cloth. Avoid abrasive cleaners.
- Interior: Periodically open the case (refer to Section 2.1) and use compressed air to remove dust buildup from fans, heatsinks, and other components. Ensure the PC is powered off and unplugged before cleaning the interior.
- Orificios de ventilación: The perforated design allows for good airflow. Keep these holes clear of obstructions and dust.
Imaxe 4.1: Varias views of the JONSBO N10 case highlighting the perforated panels designed for optimal heat dissipation and airflow.
4.2 Fan Check
Ensure the two 40mm fans are free from dust and spinning correctly to maintain adequate cooling for your hard drives.
5 Solución de problemas
Esta sección aborda problemas comúns que podes atopar coa carcasa do teu PC.
5.1 O PC non se acende
- Cable de alimentación: Asegúrese de que o cable de alimentación estea ben conectado tanto á fonte de alimentación como á toma de corrente.
- Interruptor de alimentación: Verify that the power switch on the power supply unit is in the "ON" position.
- Conectores do panel frontal: Check that the power button and other front panel connectors are correctly attached to the motherboard.
- Conexións internas: Confirm all internal power cables (24-pin ATX, CPU power, etc.) are firmly seated.
5.2 Problemas de sobrequecemento
- Fluxo de aire: Ensure the case's ventilation holes are not obstructed.
- Fans: Verify that all case fans and CPU cooler fans are spinning correctly. Clean any dust buildup.
- Compatibilidade de compoñentes: Ensure your CPU cooler height is within the 38mm limit to allow for proper airflow.
6. Especificacións
| Característica | Especificación |
|---|---|
| Tamaño do produto | 205 mm (ancho) x 205 mm (fondo) x 108 mm (alto) |
| Material | 3.3mm Aluminum Alloy + 1.0mm Steel Plate |
| Compartimento de disco duro | 4 unidades SSD de 2.5 polgadas |
| Compatibilidade da placa base | Mini ITX |
| Porto de E/S frontal | USB 3.2 Xen 2 Tipo-C x 1 |
| Soporte PSU | 1U FLEX power supply (max length 150mm) |
| Radiator Support (Air Cooler) | ≤ 38mm height |
| Seareiros | 2 x 40mm (5000 rpm ± 10%) (standard) |
| Chassis Weight (N.W.) | 1.6 kg |
Image 6.1: Diagram illustrating the dimensions of the JONSBO N10 Mini ITX PC Case.
Image 6.2: Detailed product information table for the JONSBO N10 case, including dimensions, materials, and component support.
7. Garantía e soporte
For warranty information, technical support, or service inquiries, please contact JONSBO customer service or visit the official JONSBO websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.
JONSBO Official Websitio: www.jonsbo.com
