RADIOMASTER HP0157-0043-M2

Radiomaster Boxer 2.4G 16ch ELRS Transmitter Instruction Manual

Model: HP0157-0043-M2

1. Introdución

The Radiomaster Boxer is a compact, ergonomic, and powerful radio control transmitter designed for precision control in various RC applications. It features full-size Hall effect gimbals and an intuitive button layout, making it an ideal choice for pilots seeking comfort and functionality without compromising on size.

This transmitter comes preinstalled with the EdgeTX operating system, leveraging cutting-edge software with class-leading hardware. It is available with an internal 2.4GHz ExpressLRS (ELRS) module, offering high-power, fan-cooled operation for reliable long-distance control, minimal latency, and high refresh rates. Alternatively, a 4-in-1 Multi-module (CC2500, NRF24L01, A7105, CYRF6936) or CC2500-only version is also available.

The Boxer is powered by a robust STM32F407VGT6 processor with 1MB Flash and 192KB RAM, ensuring smooth performance. Its oversized battery compartment accommodates a 2S 6200mAh pack, providing up to 20 hours of operation (batteries not included).

2. Información de seguridade

Please refer to this instruction manual before using the Radiomaster Boxer transmitter. Adhere to all safety guidelines to ensure safe operation and prevent damage to the device or injury to yourself and others.

3. Que hai na caixa

Radiomaster Boxer Transmitter, Carry Case, and Accessories

Image: Radiomaster Boxer Transmitter with its included carry case and accessories.

Your Radiomaster Boxer package includes the following items:

4. Configuración

4.1. Instalación de antena

Before powering on your Radiomaster Boxer, ensure the T-shaped antenna is securely installed. The antenna screws into the connector located at the top rear of the transmitter.

Installing the T-shaped antenna on the Radiomaster Boxer transmitter.

Image: Proper installation of the T-shaped antenna.

4.2. Instalación da batería

The Radiomaster Boxer features an oversized battery compartment designed to accommodate a 2S 6200mAh Li-Po battery pack for extended use. Batteries are not included and must be purchased separately. The transmitter also supports a battery pack for AA batteries as an alternative.

Traseira view of the Radiomaster Boxer transmitter showing the battery compartment.

Imaxe: Traseira view of the transmitter with the battery compartment.

Para instalar a batería:

  1. Abra a tapa do compartimento das baterías na parte traseira do transmisor.
  2. Connect the battery's power connector to the corresponding port inside the compartment.
  3. Carefully place the battery into the compartment.
  4. Close the battery compartment cover, ensuring it clicks securely into place.

Video: Demonstration of 6200mAh battery installation in a Radiomaster Boxer transmitter.

4.3. Ranura para tarxetas SD

The transmitter includes a redesigned SD card slot with a pre-loaded SD card. This is essential for the EdgeTX operating system and for storing model configurations and other data.

Close-up of the SD card slot in the Radiomaster Boxer transmitter.

Image: Location of the SD card slot.

5. Instrucións de funcionamento

5.1. Acendido/apagado

To power on the transmitter, press and hold the power button located centrally above the screen until the boot sequence begins and the screen displays 'EdgeTX'. To power off, press and hold the power button again until the shutdown sequence completes.

Vídeo: Rematadoview of the Radiomaster Boxer M2 ELRS Portable RC Transmitter, including power on/off and basic navigation.

5.2. Controis sobreview

The Radiomaster Boxer features a comprehensive set of controls for precise operation:

Diagram of Radiomaster Boxer controls, including gimbals, switches, buttons, and ports.

Image: Detailed diagram of the Radiomaster Boxer's controls.

5.3. EdgeTX Operating System

The EdgeTX operating system offers extensive customization and functionality. Use the SYS button to access system settings, and the PAGE buttons and scroll wheel to navigate through menus and adjust parameters. Refer to the official EdgeTX documentation for detailed instructions on advanced features and model setup.

Video: Demonstration of the Radiomaster Boxer Crush RC Transmitter with EdgeTX Operating System, highlighting its features and interface.

6. Mantemento

7 Solución de problemas

8. Especificacións

Característica Detalle
Dimensións do produto 7 x 6 x 2 polgadas
Número de modelo do artigo HP0157-0043-M2
Marca RADIOMASTER
Cor Negro
Número de canles 16
Características especiais Long Range, Portable, Lightweight
Rango de frecuencias 2.400 GHz-2.480 GHz
Nivel de resistencia á auga Non resistente á auga
Dispositivos compatibles Two-way radios and receivers using JR/FrSKY/Crossfire, ExpressLRS (ELRS), and other protocols supported by external modules
Duración da batería Up to 20 Hours (with 2S 6200mAh pack)
Radiomaster Boxer Transmitter with key dimensions labeled.

Image: Radiomaster Boxer dimensions: 235mm height, 178mm width, 76.7mm depth.

9. Garantía e soporte

For warranty information and technical support, please refer to the official Radiomaster websitio web ou póñase en contacto co seu distribuidor autorizado. Garde o recibo de compra como proba de compra para calquera reclamación de garantía.

Online resources, including firmware updates and detailed manuals, are often available on the manufacturer's websitio.

Documentos relacionados - HP0157-0043-M2

Preview Guía de inicio rápido do sistema de control remoto RadioMaster Boxer de 2.4 GHz
Guía de inicio rápido para o sistema de control remoto RadioMaster Boxer de 2.4 GHz, que abrangue a configuración, a seguridade, as especificacións e as actualizacións do firmware. Inclúe o firmware EdgeTX e varias opcións de módulos de RF.
Preview Guía de inicio rápido de RadioMaster Boxer: configuración, características e especificacións
Guía completa de inicio rápido para o sistema de control remoto RadioMaster Boxer de 2.4 GHz. Obtén información sobre a configuración, a seguridade, as actualizacións de firmware, as especificacións e o cumprimento da normativa FCC.
Preview Guía de inicio rápido de RadioMaster POCKET
Unha guía completa de inicio rápido para o sistema de radio RadioMaster POCKET de 2.4 GHz, que detalla a configuración, as precaucións de seguridade, as especificacións e os procedementos de vinculación para entusiastas de radiocontrol.
Preview RadioMaster Boxer 2.4GHz Remote Control Quick Start Guide
This quick start guide provides essential information for the RadioMaster Boxer 2.4GHz remote control system, including an introduction, safety precautions, a detailed overview of the remote control's features and buttons, instructions for model and protocol selection (multi-protocol and ELRS), battery charging guidelines, technical specifications, warranty information, and compliance details.
Preview Guía de inicio rápido do sistema de control remoto RadioMaster Boxer de 2.4 GHz
Guía completa de inicio rápido para o sistema de control remoto RadioMaster Boxer de 2.4 GHz, que abrangue a configuración, a seguridade, as especificacións e as instrucións de vinculación. Inclúe o firmware EdgeTX e varias opcións de módulos de RF.
Preview RadioMaster Boxer Quick Start Guide
A quick start guide for the RadioMaster Boxer 2.4g remote control system, covering introduction, safety information, manual and firmware download, remote control overview, model and protocol selection, specifications, and warranty information.