Manual do usuario da fonte de alimentación Sharkoon Rebel P10 de 850 W ATX 3.1

1. Introdución

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2. Información de seguridade

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• Risco eléctrico: The PSU contains high voltage components. Do not open the PSU casing. Non hai pezas que o usuario poida reparar no interior.
• Instalación profesional: Installation should be performed by a qualified technician or experienced user.
• Ventilación: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• Ambiente: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• Conexión a terra: Always connect the PSU to a grounded power outlet using the provided power cable.
• Apagado: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• Cable de alimentación de CA.
• Parafusos de montaxe
• Manual de usuario (este documento)

4. Configuración e instalación

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. Prepara o teu sistema: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. Retirar a fonte de alimentación antiga (se corresponde): Disconnect all cables from your old PSU and remove it from the case.
3. Montar a nova fonte de alimentación: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   Imaxe: Principal view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. Conectar a alimentación da placa base: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. Conectar a alimentación da CPU: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. Connect PCIe Power: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Conectar a alimentación periférica: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. Xestión de cables Organize cables neatly to ensure proper airflow and a tidy build.
9. Peche a caixa e conecte a alimentación CA: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   Imaxe: Traseira view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. Instrucións de funcionamento

Once the PSU is installed and all connections are secure:

1. Encendido: Flip the power switch on the back of the PSU to the 'ON' position.
2. Inicio do sistema: Preme o botón de acendido da caixa do teu ordenador para iniciar o sistema.
3. Funcionamento silencioso: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. Mantemento

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• Eliminación de po: Limpa periodicamente o po do ventilador e das reixas de ventilación da fonte de alimentación con aire comprimido. Asegúrate de que o sistema estea apagado e desconectado antes de limpalo.
• Comprobación do cable: Occasionally check that all power cables are securely connected and not obstructing airflow.
• Estable Voltage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7 Solución de problemas

If you encounter issues with your PSU, consider the following:

• Sen enerxía:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • Verify the power switch on the back of the PSU is in the 'ON' position.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• Inestabilidade/fallos do sistema:
  • Asegúrate de que os requisitos de alimentación do teu sistema non superen a capacidade de 850 W da fonte de alimentación.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• Ruído inusual:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. Especificacións

9. Garantía e soporte

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon websitio.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's websitio:

www.sharkoon.com