Introdución
This manual provides detailed instructions for the setup, operation, and maintenance of your RadioShack Digital Table Clock. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Produto rematadoview
The RadioShack Digital Table Clock is a versatile device designed to display time, date, weekday, indoor temperature, and humidity. It features dual alarms and can be placed on a table or mounted on a wall.
Image: The RadioShack Digital Table Clock, showcasing its sleek black design and large digital display.
Imaxe: Primeiro plano view of the RadioShack Digital Table Clock's display, showing time, AM indicator, temperature in Fahrenheit, humidity percentage, date, weekday, and alarm time.
Configuración
1. Desembalaxe
Carefully remove the clock from its packaging. Inspect the device for any signs of damage. Retain the packaging for future storage or transport.
2. Instalación da batería
The RadioShack Digital Table Clock is powered by 4 AA batteries (not included).
- Localiza o compartimento da batería na parte traseira do reloxo.
- Abra a tapa do compartimento da batería.
- Insert 4 new AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Pecha a tapa do compartimento da batería de forma segura.
Note: The clock will automatically power on once batteries are installed. If the display does not appear, check battery polarity or replace with fresh batteries.
3 Colocación
O reloxo ofrece opcións de colocación versátiles:
- Mesa: Use the integrated stand to place the clock on any flat surface such as a desk, nightstand, or shelf.
- Montaxe na parede: Utilize the keyhole slots on the back of the clock to hang it securely on a wall using appropriate screws (not included).
Instrucións de funcionamento
1. Axuste da hora e da data
Refer to the buttons on the back or side of the clock for time and date settings. Typically, there are 'SET', 'UP', and 'DOWN' buttons.
- Press and hold the 'SET' button until the time display starts blinking.
- Use the 'UP' or 'DOWN' buttons to adjust the hour. Press 'SET' to confirm and move to minutes.
- Adjust minutes, then press 'SET' to move to year, month, and day, adjusting each with 'UP'/'DOWN' and confirming with 'SET'.
- Once all settings are confirmed, the display will stop blinking.
2. Configuración de alarmas duplas
O reloxo admite dúas alarmas independentes.
- Press the 'ALARM' button once to view Alarm 1. Press again to view Alarma 2.
- Mentres viewing an alarm, press and hold the 'ALARM' button until the alarm time starts blinking.
- Use 'UP' or 'DOWN' to set the desired alarm hour, then press 'ALARM' to confirm and move to minutes.
- Adjust minutes, then press 'ALARM' to confirm.
- To activate or deactivate an alarm, press the 'ALARM' button to select it, then press 'UP' or 'DOWN' to toggle it on/off. An alarm icon will appear on the display when active.
3. Visualización de temperatura e humidade
The clock continuously monitors and displays indoor temperature and humidity.
- Unidade de temperatura: To switch between Celsius (°C) and Fahrenheit (°F), locate the '°C/°F' button (or a dedicated switch) and press it.
- Humidade: A humidade móstrase como unha porcentaxetage (%).
4. Calendar and Weekday Display
The clock automatically displays the current year, month, day, and weekday based on your time and date settings. No manual adjustment is typically required for the weekday once the date is set correctly.
Mantemento
1. Limpeza
To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the display or casing.
2. Substitución da batería
When the display dims or functions become erratic, it is time to replace the batteries. Follow the battery installation steps outlined in the 'Setup' section. Always replace all 4 AA batteries at the same time with new ones.
3. Almacenamento
If the clock will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store the clock in a cool, dry place away from direct sunlight and extreme temperatures.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A pantalla está en branco ou escura. | As baterías están baixas ou instaladas incorrectamente. | Substitúa as pilas por pilas AA novas, asegurándose de manter a polaridade correcta. |
| A hora ou a data son incorrectas. | Time/date not set correctly or reset due to power interruption. | Follow the 'Setting Time and Date' instructions to reset. |
| Non soa a alarma. | Alarm is not activated or volume is too low (if adjustable). | Ensure the alarm is set and activated (alarm icon visible). Check for any volume controls. |
| As lecturas de temperatura/humidade parecen inexactas. | Clock placed near heat sources, vents, or in direct sunlight. | Relocate the clock to a stable environment away from extreme temperature fluctuations. Allow time for readings to stabilize. |
Especificacións
| Característica | Detalle |
|---|---|
| Marca | RadioShack |
| Número de modelo | 6301714 |
| Cor | Negro |
| Tipo de visualización | Dixital |
| Característica especial | Alarm, Temperature Display, Humidity Display, Calendar, Weekday Display |
| Dimensións do produto | 2.36" de ancho x 7.08" de alto |
| Fonte de enerxía | Alimentado por pilas (4 pilas AA, non incluídas) |
| Uso interior/exterior | Interior |
| Material do marco | Plástico |
| Tipo de montaxe | Soporte de parede, mesa |
| Peso do elemento | 1.23 libras |
Información de seguridade
- Non expoñas o reloxo a temperaturas extremas, luz solar directa nin humidade elevada.
- Evite deixar caer o dispositivo ou sometelo a fortes impactos.
- Do not attempt to disassemble or modify the clock. This will void any potential warranty.
- Elimina as baterías usadas de forma responsable segundo a normativa local.