Manual do usuario da caixa para PC KRUX Empero ATX

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your KRUX Empero ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation. The KRUX Empero case is designed to accommodate ATX motherboards and offers extensive cooling options and component compatibility.

Figura 1: Parte frontal view of the KRUX Empero ATX PC Case, showcasing its glass panels and pre-installed ARGB fans.

2. Características do produto

• Four 120mm ARGB PWM Fans: Pre-installed for efficient cooling and customizable lighting.
• ARGB Controller Splitter: Manages fan lighting and synchronization.
• Paneis de vidro: Front and side tempered glass panels provide an unobstructed view de compoñentes internos.
• Deseño de dobre cámara: Separates the power supply and storage drives from the main components for improved airflow and aesthetics.
• Liquid Cooler Compatibility: Supports 120mm, 240mm, 280mm, and 360mm liquid cooling radiators.
• E/S frontal moderna: Includes a USB-C port, USB 3.0 port, and audio jacks for convenient connectivity.
• Liquidación da GPU: Accommodates graphics cards up to 420mm in length.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• KRUX Empero ATX PC Case
• 4 x 120mm ARGB PWM Fans (pre-installed)
• ARGB Controller Splitter (pre-installed)
• Caixa de accesorios (parafusos, bridas, separadores)
• Manual de usuario

Figura 2: Explotado view illustrating the various components of the KRUX Empero PC case, including panels, frame, and fans.

4. Configuración e instalación

Follow these steps for proper component installation.

4.1 Eliminación de paneis

1. Carefully remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case.
2. Remove the front glass panel if necessary for fan or radiator installation.

4.2 Instalación da placa base

1. Instale a protección de E/S na abertura traseira da caixa.
2. Aliña a túa placa base ATX cos separadores preinstalados.
3. Fixe a placa base cos parafusos proporcionados.

4.3 Instalación da Unidade de Alimentación (PSU).

The KRUX Empero features a dual-chamber design. The PSU is installed in the rear chamber.

1. Mount the PSU to the PSU bracket, typically located at the rear bottom of the case.
2. Slide the PSU with its bracket into the designated compartment and secure it with screws.

4.4 Instalación da unidade de almacenamento

The case supports multiple storage drives. Refer to the case interior for specific mounting points for 2.5" SSDs and 3.5" HDDs.

1. Secure 2.5" SSDs to the dedicated mounting plates, often found behind the motherboard tray.
2. Install 3.5" HDDs into the drive cages, usually located in the PSU shroud area.

4.5 Instalación da tarxeta gráfica (GPU)

The case supports GPUs up to 420mm in length.

1. Remove the necessary PCIe slot covers at the rear of the case.
2. Insert the GPU into the appropriate PCIe slot on your motherboard.
3. Fixa a GPU con parafusos.

4.6 Instalación do sistema de refrixeración

The case comes with four 120mm ARGB PWM fans pre-installed. Additional fans or liquid coolers can be added.

• Fans: The case supports various fan configurations. Ensure proper airflow direction (intake/exhaust).
• Liquid Coolers: Radiators up to 360mm can be mounted. Consult your liquid cooler's manual for specific installation steps.

Figura 3: Interior view of the KRUX Empero case with the side panel removed, highlighting the spacious layout for components and cooling solutions.

4.7 Front I/O Connections

Connect the front panel cables to your motherboard according to your motherboard's manual.

• USB-C: Connect the USB-C header cable to your motherboard's USB 3.2 Gen 2 header.
• USB 3.0: Connect the USB 3.0 header cable to your motherboard's USB 3.0 header.
• USB 2.0: Connect the USB 2.0 header cable to your motherboard's USB 2.0 header.
• Son de alta definición: Connect the HD Audio cable to your motherboard's audio header.
• Power SW, Reset SW, HDD LED, Power LED: Connect these small connectors to the corresponding pins on your motherboard's front panel header.
• Botón LED: Connect the LED button cable to the ARGB controller for lighting control.

Figure 4: Close-up of the top-front I/O panel, featuring USB-C, USB 3.0, audio ports, and control buttons.

5. Instrucións de funcionamento

5.1 Acendido

Once all components are installed and cables are connected, press the power button on the front I/O panel to start your system.

5.2 Control do ventilador ARGB

The pre-installed ARGB fans are connected to a controller. Use the dedicated LED button on the front I/O panel to cycle through various lighting modes and colors. For advanced control, connect the controller to your motherboard's ARGB header (if available) and use the motherboard's software.

6. Mantemento

Un mantemento regular axuda a garantir un rendemento óptimo e unha maior lonxevidade da carcasa do teu PC.

• Filtros de po: The KRUX Empero case includes removable dust filters. Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Paneis de vidro: Clean tempered glass panels with a soft, lint-free cloth and a glass cleaner. Avoid abrasive materials that could scratch the surface.
• Limpeza de interiores: Usa aire comprimido para eliminar o po dos compoñentes internos e das aspas do ventilador. Asegúrate de que o sistema estea apagado e desconectado antes de limpalo.

7 Solución de problemas

If you encounter issues during or after installation, consider the following common troubleshooting steps:

• Sen enerxía: Ensure the PSU is switched on, all power cables (24-pin, 8-pin CPU, GPU PCIe) are securely connected, and the front panel power switch cable is correctly attached to the motherboard.
• Fans Not Spinning/No ARGB: Check fan power connections to the motherboard or controller. Verify ARGB cables are properly connected to the controller and/or motherboard header.
• Sen visualización: Confirm the monitor cable is connected to the graphics card (not the motherboard's integrated graphics port, unless using integrated graphics). Reseat the graphics card and RAM modules.
• Os portos USB non funcionan: Ensure the front panel USB 3.0 and USB-C cables are correctly connected to the motherboard headers.

8. Especificacións

9. Garantía e soporte

Specific warranty information for the KRUX Empero ATX PC Case is not provided in this document. For detailed warranty terms, technical support, or further assistance, please refer to the official KRUX websitio ou póñase en contacto co seu comerciante.