Manual de usuario do robot aspirador Roborock Q7 TF

1. Introdución

The Roborock Q7 TF is an advanced robot vacuum cleaner designed to provide efficient and thorough cleaning for various floor types. It integrates powerful suction, intelligent navigation, and mopping capabilities to maintain a clean living environment. This manual provides instructions for setting up, operating, and maintaining your device.

Características principais:

• 10,000 Pa HyperForce Suction: Delivers powerful cleaning for dust and debris removal.
• Dual Anti-Tangle System: Designed to minimize hair tangles, suitable for homes with pets.
• Depósito de auga integrado: 270ml capacity for continuous wet mopping.
• Three Adjustable Water Flow Levels: Allows customization of mopping intensity.
• Precise LiDAR Navigation: 360° scanning for accurate mapping and efficient route planning.
• Mapeo multinivel: Supports mapping for up to three different floor levels.
• Limpeza programada: Enables automated cleaning at specified times.

2. Información de seguridade

Before using this product, please read this user manual carefully and keep it for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Este aparello pode ser usado por nenos a partir de 8 anos e persoas con capacidades físicas, sensoriais ou mentais reducidas ou con falta de experiencia e coñecementos se recibiron supervisión ou instrucións sobre o uso do aparello de forma segura e comprenden os perigos que implica. .
• Os nenos deben ser supervisados ​​para asegurarse de que non xoguen co aparello.
• A limpeza e o mantemento do usuario non deben ser feitos por nenos sen supervisión.
• Non empregue o robot en contornas con chamas abertas ou obxectos fráxiles.
• Ensure the charging dock is placed on a level surface against a wall, with adequate clearance around it.
• Manteña o cabelo, a roupa solta, os dedos e todas as partes do corpo lonxe das aberturas e das partes móbiles.
• Emprega só o adaptador de corrente e a base de carga especificados polo fabricante.
• Non empregues o robot para recoller obxectos grandes, obxectos afiados ou líquidos.
• Always remove the water tank and empty the dustbin before performing maintenance.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

• Roborock Q7 TF Robot Vacuum Cleaner
• Base de carga
• Power Cable (2-pin EU plug)
• Depósito de auga (integrado)
• Floor Brush (main brush)
• Dusting Brush (side brush)
• Manual de usuario

4. Produto rematadoview

Robot aspirador

The Roborock Q7 TF robot vacuum cleaner shown alongside its compact charging dock, ready for operation.

• Sensor LIDAR: For navigation and mapping.
• Botón de encendido/limpo: Start/pause cleaning, power on/off.
• Dock Button: Send robot back to charging dock.
• Dustbin & Water Tank: Integrated unit for dust collection and water storage.
• Cepillo principal: For deep cleaning carpets and hard floors.
• Cepillo lateral: Retira os residuos das beiras e das esquinas.
• Sensores de acantilado: Detects drops to prevent falls.
• Contactos de carga: Connects with the charging dock.

Base de carga

• Contactos de carga: Transfers power to the robot.
• Indicador de potencia: Mostra o estado de carga.
• Dustbag Compartment: For automatic dust emptying (if applicable model).

5. Configuración

5.1 Colocación da base de carga

1. Place the charging dock on a hard, level surface against a wall.
2. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock.
3. Keep the area free from obstacles, such as power cables or furniture.

5.2 Conexión de alimentación

1. Connect the power cable to the charging dock.
2. Conecta o outro extremo do cable de alimentación a unha toma de corrente.

5.3 Cargo inicial

1. Place the robot on the charging dock. Ensure the charging contacts on the robot align with those on the dock.
2. The robot will power on automatically and begin charging. Allow the robot to fully charge before its first use.

5.4 Descarga e conexión da aplicación

1. Download the Roborock app from your mobile device's app store (iOS or Android).
2. Open the app and follow the on-screen instructions to create an account and add your Roborock Q7 TF.
3. Asegúrate de que a túa rede Wi-Fi sexa de 2.4 GHz para unha conexión óptima.

5.5 Water Tank Filling (for Mopping)

1. Remove the integrated dustbin and water tank unit from the robot.
2. Open the water tank cap and fill it with clean water. Do not use detergents or cleaning solutions not approved by Roborock.
3. Close the cap securely and reinsert the unit into the robot.

Un detallado view of the integrated 270ml water tank within the Roborock Q7 TF, designed for continuous mopping.

6. Instrucións de funcionamento

6.1 Starting/Pausing/Stopping Cleaning

• Comeza a limpeza: Press the Power/Clean button on the robot or use the Roborock app. The robot will begin cleaning the entire area.
• Pausar a limpeza: Prema o botón de acendido/limpado durante o funcionamento.
• Deixar de limpar: Press and hold the Power/Clean button for 3 seconds, or use the app to send the robot back to the dock.

6.2 Función de fregado

The Roborock Q7 TF can vacuum and mop simultaneously. Ensure the water tank is filled and the mop cloth is attached (if applicable).

A visual representation of the three adjustable water flow levels for the mopping function, allowing customization of cleaning intensity.

• Adjust water flow levels (low, medium, high) via the Roborock app to suit different floor types and cleaning needs.
• Remove the mop cloth after cleaning to prevent mildew and odors.

6.3 Limpeza programada

Set up cleaning schedules through the Roborock app. You can specify cleaning times, days, and areas.

An image depicting the Roborock Q7 TF being controlled via a smartphone app for scheduled cleaning, alongside an illustration of its multi-level mapping capability for up to three floors.

6.4 Using the App (Mapping, No-Go Zones, etc.)

Unha sobrecarga view showing the Roborock Q7 TF utilizing its LiDAR navigation system to scan a room and create a detailed map for efficient cleaning.

• Mapeo: The robot creates a map of your home during its first cleaning run. This map can be viewed and edited in the app.
• Mapeo multinivel: The app supports saving maps for up to three different floor levels.
• No-Go Zones & Invisible Walls: Define areas the robot should avoid or virtual barriers it should not cross.
• Limpeza de zonas: Selecciona áreas específicas no mapa para que o robot as limpe.
• Custom Cleaning Modes: Adjust suction power and water flow for different rooms or areas.

7. Mantemento

Regular maintenance ensures optimal performance and extends the lifespan of your Roborock Q7 TF.

7.1 Papeleira e filtro

1. Cubo de lixo baleiro: Press the release button to remove the integrated dustbin/water tank unit. Open the dustbin lid and empty its contents into a trash bin.
2. Limpar o filtro: Remove the HEPA filter from the dustbin. Tap it gently to remove dust. Rinse the filter with water if necessary, but ensure it is completely dry before reinstallation (allow 24 hours).
3. Frecuencia: Empty dustbin after each use. Clean filter weekly. Replace filter every 3-6 months.

7.2 Main Brush

Un corte view illustrating the dual anti-tangle brush system of the Roborock Q7 TF, designed to minimize hair entanglement during cleaning.

1. Flip the robot over and press the release tabs to remove the main brush cover.
2. Lift out the main brush. Use the cleaning tool (if provided) to remove hair and debris tangled around the brush.
3. Volva colocar a escova principal e a tapa.
4. Frecuencia: Limpar semanalmente. Substituír cada 6-12 meses.

7.3 Cepillo lateral

1. Unscrew the side brush.
2. Remove any hair or debris wrapped around the brush or its axle.
3. Reattach the side brush.
4. Frecuencia: Limpar mensualmente. Substituír cada 3-6 meses.

7.4 Water Tank and Mop Cloth

1. Baleira a auga restante do depósito despois de cada sesión de fregado.
2. Remove the mop cloth and rinse it thoroughly with water. Allow it to air dry completely.
3. Frecuencia: Clean mop cloth after each use.

7.5 Sensores e contactos de carga

1. Wipe all sensors (cliff sensors, wall sensor, LiDAR sensor window) and charging contacts on both the robot and the dock with a soft, dry cloth.
2. Frecuencia: Limpar mensualmente.

8 Solución de problemas

If you encounter issues with your Roborock Q7 TF, refer to the following table for common problems and solutions.

9. Especificacións

10. Garantía e soporte

The Roborock Q7 TF Robot Vacuum Cleaner comes with a two-year local warranty and service support available in Singapore. For warranty claims, technical assistance, or customer service inquiries, please contact your local Roborock authorized service center or refer to the official Roborock websitio para obter información de soporte.

Para máis información, visite o Roborock Store on Amazon.sg.