ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Introdución

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Imaxe 1.1: Fronte view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Información de seguridade

Para reducir o risco de incendio, descarga eléctrica ou lesións persoais, siga sempre estas precaucións de seguridade básicas:

• AVISO: Risco de descarga eléctrica. Desconecte a alimentación do fusible ou disyuntor antes de instalar ou reparar.
• Este produto debe ser instalado de acordo co código de instalación aplicable por unha persoa familiarizada coa construción e o funcionamento do produto e os perigos implicados.
• Use só circuítos de 120 V CA e 60 Hz.
• Non intente desmontar nin modificar o aparello. Non hai pezas no seu interior que o usuario poida reparar.
• Asegúrese de que todas as conexións estean seguras e debidamente illadas.
• Este dispositivo só é apto para uso en interiores.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Ferraxes de montaxe (parafusos, porcas para cables)
• E26 Adapter Accessories (for recessed can installation)
• Manual de instrucións (este documento)

Image 3.1: Included accessories for installation.

4. Características do produto

• Seleccionable en 3CCT: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Sensor de movemento: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Atraso axustable: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Sensor de luz: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Eficiencia enerxética: 16W LED provides 1000 lumens of brightness.
• Instalación versátil: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Configuración e instalación

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Retire a lente xirando no sentido das agullas do reloxo.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Retire a lente xirando no sentido das agullas do reloxo.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Instrucións de funcionamento

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Funcionalidade do sensor de movemento

• Día: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Axuste da temperatura da cor (CCT)

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Asegúrese de que a alimentación estea apagada.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Asegúrese de que a alimentación estea apagada.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Mantemento

The ECOELER LED ceiling light requires minimal maintenance.

• Limpeza: Asegúrese de que a electricidade estea desconectada antes de limpala. Limpe a luminaria cun pano suave, seco ou lixeiramente húmido.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lente: Keep the lens clean to ensure optimal light output and motion sensor performance.

8 Solución de problemas

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Especificacións

10. Garantía e soporte

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER websitio.

Fabricante: ECOELER ELECTRIC INC