SEBSON Outdoor Motion Sensor IP65 User Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.

2. Instrucións de seguridade

• A instalación debe ser realizada por un electricista cualificado de acordo coa normativa local de cableado.
• Asegúrese de que a fonte de alimentación estea desconectada antes da instalación ou mantemento.
• Do not exceed the maximum load capacity specified in the technical data.
• This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
• Manter fóra do alcance dos nenos.

3. Contido do paquete

O paquete inclúe:

• 1 x SEBSON IR Motion Sensor IP65
• Accesorios de montaxe (parafusos, tacos)
• Manual de instrucións (este documento)

4. Características do produto

The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:

• Montaxe versátil: Suitable for both wall and ceiling surface mounting.
• Amplio rango de detección: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
• Configuración programable: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
• Función de giro: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
• High Protection Class: IP65 rated for outdoor weather resistance.
• Compatible con LED: Supports LED lighting up to 600W and incandescent lamps ata 1200 W.

Imaxe 4.1: Acabadoview of key features including detection range, power compatibility, IP rating, and adjustable settings.

Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.

5. Configuración e instalación

5.1 Localización de montaxe

Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.

• Montaxe no teito: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
• Montaxe na parede: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.

Imaxe 5.1: Ex.ample of the motion sensor installed on an outdoor wall.

Image 5.2: Detection range and angle variations for ceiling and wall installations.

5.2 Wiring (3-Wire Installation)

The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.

1. Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
2. Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
3. Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
4. Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
5. Asegúrese de que todas as conexións estean seguras e debidamente illadas.

Image 5.3: Base of the sensor showing wiring access points.

5.3 Instalación física

1. Mark the drilling points on the wall or ceiling using the sensor's base as a template.
2. Fai buratos e coloca tacos de parede se é necesario.
3. Secure the sensor base to the mounting surface with screws.
4. Perform wiring as described in section 5.2.
5. Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
6. Adjust the sensor head to the desired angle using the swivel mechanism.

6. Operating Instructions and Adjustments

The SEBSON motion sensor features three adjustable settings to customize its operation:

Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).

6.1 TIME (Switch-off Delay)

This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.

• Turn the dial clockwise to increase the duration.
• Turn the dial counter-clockwise to decrease the duration.

6.2 LUX (Ambient Brightness)

This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).

• Set to the 'sun' symbol (max LUX) for activation during both day and night.
• Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
• Adjust incrementally to find the desired activation threshold.

6.3 SENS (Sensitivity/Detection Range)

This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.

• Turn clockwise for maximum sensitivity and detection range.
• Turn counter-clockwise for minimum sensitivity and detection range.
• Adjust to prevent false triggers from distant objects or small animals.

7. Mantemento

• Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
• Check wiring connections periodically for any signs of wear or corrosion.
• Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
• No user-serviceable parts inside. Do not attempt to open the main housing.

8 Solución de problemas

9. Especificacións

Imaxe 9.1: Dimensións do produto.

10. Garantía e soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON websitio. Garda o comprobante de compra para reclamacións de garantía.