1. Introdución
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Que hai na caixa
- 1x Dimmer Light Switch
- 1x placa de parede
- 4x porcas de arame
- 2 tornillos longos
- 2 tornillos curtos
- 1x Manual de usuario (este documento)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Especificacións
| Característica | Detalle |
|---|---|
| Modo de operación | ACENDIDO APAGADO |
| Valoración actual | 3 Amps |
| Vol. Operativotage | 125 voltios |
| Dispositivos compatibles | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Tipo de control | Botón manual |
| Protocolo de conectividade | N.A (No WiFi) |
| Dimensións (L x W x H) | 4.49 x 2.76 x 1.34 polgadas |
| Peso do elemento | 5 onzas |
| Cor | Branco |
Image: Product dimensions of the dimmer switch.
4. Instalación
Importante: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Apagar a enerxía: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltagprobador.
- Eliminar o interruptor antigo: Carefully remove the existing wall plate and unscrew the old switch from the electrical box. Disconnect the wires from the old switch.
- Identificar os cables: Identify the following wires in your electrical box:
- Cable de liña: Transporta a enerxía do disyuntor.
- Cable de carga: Conéctase á luminaria.
- Fío neutro: Typically white, required for this dimmer switch.
- Fío de terra: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Interruptor de atenuación Arame Branco to Wall Box Fío neutro
- Interruptor de atenuación Arame negro to Wall Box Power Supply's Line (Live)
- Interruptor de atenuación Arame Vermello to Wall Box Fío de carga
- Interruptor de atenuación Arame Verde to Wall Box Fío de terra
- Montar o interruptor: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Instalar placa de parede: Attach the new wall plate over the dimmer switch.
- Restaurar enerxía: Volve a conectar o interruptor.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Funcionamento
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Primeiro uso
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Máis controisview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Botón de encendido: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Axuste fino: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Axuste fino: Press and hold to gradually decrease brightness by 1% each time. - Luces indicadoras: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Función de memoria
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Compatibilidade
This dimmer switch is compatible with various dimmable light sources:
- LED regulable: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- L incandescenteamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp e LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
