ASUS RYUO IV SLC 360

ASUS ROG RYUO IV SLC 360 ARGB CPU Liquid Cooler User Manual

Model: RYUO IV SLC 360 | Brand: ASUS

1. Introdución

The ASUS ROG RYUO IV SLC 360 ARGB is an advanced all-in-one CPU liquid cooler designed for optimal thermal performance and aesthetic customization. It features a curved 6.67-inch AMOLED display, pre-mounted daisy-chained ARGB fans, and a powerful pump to ensure efficient cooling for high-performance systems.

This manual provides essential information for the proper installation, operation, and maintenance of your ROG RYUO IV SLC 360 ARGB liquid cooler.

ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler with curved AMOLED display

Figure 1: ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler

2. Configuración e instalación

2.1 Contido do paquete

Antes de comezar a instalación, comproba que todos os compoñentes estean presentes no paquete:

  • ROG Ryuo IV SLC 360 ARGB AIO Cooler (Radiator, Pump, Fans)
  • Accessory Pack of Screws and Brackets (for Intel and AMD sockets)
  • Guía de inicio rápido
  • ROG Cable Organizer
  • Adhesivo ROG
  • ROG VIP Card
Contents of the ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler box

Figura 2: Que hai na caixa

2.2 Compatibilidade

The ROG RYUO IV SLC 360 ARGB supports a wide range of CPU sockets:

  • Intel: LGA 1851, 1700
  • AMD: AM5, AM4

Ensure your motherboard and PC case are compatible with a 360mm radiator. The shortened tubing design (200mm) is optimized for a clean aesthetic and improved compatibility within most mid to large tower cases.

Compatibility information for ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler

Figure 3: Extensive Compatibility

2.3 Pasos de instalación (Información xeral)view)

  1. Preparar a placa base: Install the appropriate mounting brackets for your CPU socket (Intel or AMD) onto the motherboard.
  2. Montar o radiador: Secure the 360mm radiator to an available mounting location in your PC case, typically at the top or front. The pre-mounted daisy-chained ARGB fans simplify cable management.
  3. Instalar a bomba/placa fría: Apply thermal paste (if not pre-applied) to the CPU. Mount the pump/cold plate assembly onto the CPU, ensuring even pressure.
  4. Cables de conexión: Connect the pump and fan cables to the appropriate headers on your motherboard. Connect the display cable for the AMOLED screen.
  5. Instalación de software: Install the ASUS Armoury Crate software to customize the AMOLED display, ARGB lighting, and fan profiles.

For detailed, step-by-step instructions, please refer to the included Quick Start Guide or the official ASUS support websitio.

ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler with pre-installed daisy-chained fans

Figure 4: Pre-Installed, Daisy-Chained Fans

3. Instrucións de funcionamento

3.1 Curved AMOLED Display

The 6.67-inch curved AMOLED display on the pump head supports 3D-effect videos or customized system information. Use the ASUS Armoury Crate software to:

  • Monitor real-time CPU temperature, fan speed, and other system metrics.
  • Display custom images, GIFs, or videos.
  • Adjust display orientation and content.
ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler's 6.67-inch 2K AMOLED curved screen

Figure 5: Curved AMOLED Display

3.2 Control de iluminación ARGB

The pre-mounted daisy-chained ARGB fans feature front and side lighting. The lighting can be synchronized with other ASUS Aura Sync compatible components through the Armoury Crate software. Customize lighting effects, colors, and patterns to match your system's aesthetic.

3.3 Rendemento de refrixeración

The powerful pump and high-airflow fans deliver robust cooling performance, higher flow, and lower impedance. The system is designed to maintain optimal operating temperatures for your CPU even under heavy workloads, preventing thermal throttling and performance degradation.

Vídeo 1: Rematadoview of the ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler's features and aesthetics.

4. Mantemento

Regular maintenance ensures the longevity and optimal performance of your liquid cooler:

  • Eliminación de po: Periodically clean the radiator fins and fan blades using compressed air to prevent dust buildup, which can impede airflow and cooling efficiency.
  • Comprobar a tubaxe e as conexións: Inspect the tubing for any signs of kinks, leaks, or damage. Ensure all connections to the pump, radiator, and motherboard are secure.
  • Actualizacións de software: Keep your ASUS Armoury Crate software updated to the latest version to ensure compatibility and access to new features or performance optimizations.
  • Ruído da bomba: If you notice unusual pump noises, ensure the pump is running at an appropriate speed and that there are no air bubbles trapped in the loop. Gently tilting the PC case can sometimes help dislodge air bubbles.

5 Solución de problemas

5.1 Temperaturas altas da CPU

  • Verify that the pump is functioning correctly and that its cables are securely connected.
  • Ensure fans are spinning and configured for optimal airflow (intake/exhaust).
  • Comprobe se hai acumulación de po no radiador e límpeo se é necesario.
  • Confirm that the cold plate is making proper contact with the CPU and that thermal paste was applied correctly.

5.2 Ruído do ventilador

  • Adjust fan curves in ASUS Armoury Crate to find a balance between cooling performance and noise levels.
  • Asegúrate de que os ventiladores estean montados de forma segura e que non vibren contra a carcasa.
  • At maximum RPM, fans may produce audible noise, which is normal for high-performance cooling.

5.3 AMOLED Display Issues

  • Ensure the display cable is properly connected to the motherboard.
  • Update ASUS Armoury Crate software and display drivers.
  • If the display prevents your OLED monitor from entering sleep mode, check for updated software or firmware from ASUS that addresses this specific issue.

5.4 ARGB Lighting Malfunctions

  • Verify all ARGB cables are correctly connected to the motherboard's ARGB headers.
  • Ensure ASUS Armoury Crate is installed and updated, and that lighting effects are properly configured.

6. Especificacións

CaracterísticaEspecificación
Dimensións do produto4.72 cm de longo x 4.72 cm de ancho x 0.98 cm de alto
MarcaASUS
Tipo de conector de alimentación4-pin PWM, 3-pin 5V ARGB
Voltage0.55 voltios
Wattage120 vatios
Método de arrefriamentoVentilador, Auga
Dispositivos compatiblesAMD: AM5, AM4, Intel: LGA 1851, 1700
Nivel de ruído39.6 decibeis
MaterialAluminio, Cobre
Velocidade de rotación máxima1500 RPM

7. Garantía e soporte

7.1 Información da garantía

The ASUS ROG RYUO IV SLC 360 ARGB Liquid Cooler comes with the following warranty:

  • Visualización: 2 ano de garantía
  • AIO Cooler: 6 ano de garantía

Please retain your proof of purchase for warranty claims. Warranty terms and conditions may vary by region.

7.2 Soporte técnico

For further assistance, technical support, or to download the latest drivers and software, please visit the official ASUS support websitio:

Soporte ASUS Websitio

Tamén podes visitar o Tenda ASUS en Amazon para obter máis información sobre o produto.

Documentos relacionados - RYUO IV SLC 360

Preview ASUS ROG RYUO III ARGB Series CPU Liquid Cooler Quick Start Guide
Comprehensive quick start guide for the ASUS ROG RYUO III ARGB Series CPU Liquid Cooler, covering installation for Intel and AMD, cable connections, and software setup for optimal PC cooling.
Preview Guía de inicio rápido do refrigerador líquido para CPU ASUS ROG RYUO IV 360 ARGB Hatsune Miku Edition
Guía de inicio rápido para o refrigerador líquido de CPU ASUS ROG RYUO IV 360 ARGB Hatsune Miku Edition, que inclúe instrucións de instalación, contido da embalaxe e información de soporte.
Preview Guía de inicio rápido do refrigerador líquido para CPU da serie ASUS ROG Strix LC II ARGB
Guía completa para instalar o refrixerador líquido de CPU da serie ASUS ROG Strix LC II ARGB. Inclúe o contido do paquete, a instalación paso a paso para plataformas Intel e AMD, as conexións de cable e as instrucións para descargar o software.
Preview ASUS ROG STRIX LC RGB Series Liquid CPU Cooler Quick Start Guide
Quick Start Guide for the ASUS ROG STRIX LC RGB Series Liquid CPU Cooler, covering package contents, installation for Intel and AMD platforms, fan mounting, and software download.
Preview ASUS ROG Ryujin III ARGB Series CPU Liquid Cooler Guía de inicio rápido
Esta guía de inicio rápido proporciona información esencial para instalar o refrixerador líquido de CPU da serie ASUS ROG Ryujin III ARGB. Inclúe o contido do paquete, os pasos detallados de instalación para as plataformas Intel e AMD, a montaxe do ventilador e do radiador, as conexións dos cables, as instrucións para descargar o software e as preguntas máis frecuentes.
Preview Guía de inicio rápido do refrigerador líquido para CPU da serie ASUS ROG Strix LC
This quick start guide provides essential installation and setup instructions for the ASUS ROG Strix LC Series Liquid CPU Cooler, covering package contents, Intel and AMD CPU installation, fan and radiator mounting, and software download.