Introdución
Thank you for choosing the Lifepro HydroLife Peak Hydrogen Water Bottle Generator. This portable device utilizes advanced SPE/PEM technology to enrich your drinking water with up to 8000ppb of hydrogen, supporting your daily hydration and active lifestyle. This manual provides essential information for the safe and effective use of your new hydrogen water bottle.
Image: Lifepro HydroLife Peak Hydrogen Water Bottle, front view.
Produto rematadoview
The HydroLife Peak is engineered for performance and convenience, featuring a robust design and user-friendly interface.
- Alta concentración de hidróxeno: Utilizes platinum-coated titanium plates and a proton exchange membrane (SPE/PEM) to produce water with up to 8000ppb hydrogen.
- Pantalla OLED: Provides real-time information on hydrogen levels and cycle duration.
- Portátil e recargable: Equipped with a 2000mAh battery and USB-C charging for use anywhere.
- Construción duradeira: Made from aviation aluminum and food-grade polycarbonate for lightweight, leak-resistant daily use.
- Fácil operación: Single-button control for 5-minute or 10-minute hydrogen generation cycles.
Imaxe: Explosión view of the HydroLife Peak components.
Configuración
- Inspección inicial: Upon receiving your HydroLife Peak, you may notice some water inside. This is normal as the generator is shipped pre-hydrated to protect its components and ensure optimal performance.
- Cargando: Before first use, fully charge the device using the provided USB-C charging cable. The OLED display will indicate charging status.
- Montaxe: Ensure the bottle is securely screwed onto the base. The leak-resistant design requires a firm connection.
Image: Product arriving pre-hydrated for convenience.
Instrucións de funcionamento
Follow these steps to generate hydrogen-rich water:
- Fill the Bottle: Unscrew the top lid and fill the bottle with potable water, leaving about an inch of space from the top. The HydroLife Peak is compatible with filtered and bottled water.
- Seleccionar ciclo: Press the power button on the base to initiate a hydrogen generation cycle. A single press typically starts a 5-minute cycle, while a double press may activate a 10-minute cycle (refer to specific model instructions for exact button functions). The OLED display will show the remaining time and hydrogen concentration (PPM).
- Disfruta: Once the cycle is complete, the device will automatically shut off. Drink the hydrogen-rich water promptly for best results.
Image: Pressing the power button to start hydrogen generation.
Vídeo oficial do produto
Video: Demonstrating the features and benefits of the Lifepro HydroLife Peak Hydrogen Water Bottle, including its ease of use and portability.
Mantemento
Proper care ensures the longevity and performance of your HydroLife Peak.
- Enxágüe diario: After each use, rinse the bottle and lid with clean water. The wide mouth design facilitates easy cleaning.
- Limpeza profunda mensual: For a thorough cleaning, disassemble the bottle and wash all parts (except the electronic base) with mild soap and water. Ensure all components are completely dry before reassembly.
- Electrolyzer Care: The electrolyzer should not be left dry for extended periods. If not used for a long time, ensure it is kept moist.
Image: Cleaning the HydroLife Peak Hydrogen Water Bottle.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O dispositivo non se acende. | Batería baixa. | Carga o dispositivo usando o cable USB-C. |
| No hydrogen bubbles generated. | Insufficient water or improper assembly. | Ensure water level is adequate and the bottle is securely attached to the base. |
| Fuga de auga. | Lid or bottle not properly sealed. | Tighten the lid and ensure the bottle is correctly screwed onto the base. Check gaskets for damage. |
| A pantalla OLED non funciona. | Dispositivo apagado ou batería baixa. | Press the power button to activate. Charge the device if the battery is low. |
Especificacións
- Marca: Life Pro
- Nome do modelo: Hydrolife Peak
- Número de modelo do artigo: LP-HYDLFPK-OCN
- Capacidade: 280 Milliliters (9.5oz)
- Dimensións do produto: 2.4 cm de longo x 8.2 cm de ancho x 2.4 cm de alto
- Peso do artigo: 12.3 onzas (0.77 libras)
- Material: Polycarbonate, Aviation Aluminum
- Fonte de enerxía: Alimentado por batería (2000 mAh)
- Método de purificación: Hydrogen Electrolysis (SPE/PEM Technology)
- Nivel máximo de TDS de auga admitido: 600 ppm
- Característica especial: Portátil
- Compoñentes incluídos: Hydrogen Water Bottle, USB-C Charging Cable
Image: Dimensions and capacity of the HydroLife Peak.
Garantía e Soporte
For warranty information, product registration, or technical support, please refer to the official LifePro websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra para calquera reclamación de garantía.
Podes visitar o LifePro Store on Amazon para obter información adicional sobre o produto e recursos de asistencia.
