KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Produto rematadoview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Imaxe 1: Fronte view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing o seu robusto metal casing and grill.

Características principais:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Protección contra sobrecalentamento: Función de seguridade integrada para evitar o sobrequecemento.

2. Información de seguridade

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Instalación eléctrica: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Conexión a terra: This heater must be properly grounded to reduce the risk of electric shock.
• Localización: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Protección contra sobrecalentamento: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Non cubrir: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Mantemento: Desconecte a alimentación antes de realizar calquera mantemento ou limpeza.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e estean intactos ao abrir o envase:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• Ferraxes de montaxe (normalmente incluídas)
• Manual de instrucións (este documento)

Se falta ou está danado algún elemento, póñase en contacto co seu provedor inmediatamente.

4. Instalación

AVISO: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Localización de montaxe

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Conexión eléctrica

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• O quentador tira 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Asegúrese de que todas as conexións estean firmes e seguras.

5. Funcionamento

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Power Switch Settings

• OFF: The heater is completely off, and no heat or fan operation will occur.
• VENTILADOR: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• CALENTACIÓN: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Mantemento

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

• Limpeza: Limpar periodicamente o exterior do quentador cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Entradas/Saídas de aire: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Inspección: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7 Solución de problemas

Antes de contactar co servizo de atención ao cliente, volva aview os seguintes problemas e solucións comúns:

Se o problema persiste despois de intentar estas solucións, póñase en contacto co servizo de atención ao cliente ou cun electricista cualificado.

8. Especificacións

9. Garantía e soporte

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.

Fabricante: KING Electrical Manufacturing

Websitio: www.king-electric.com (Exampa ligazón, por favor, verifica a oficial websitio)