1. Introdución
This manual provides essential information for the safe and efficient use of your HumsiENK 48V 150AH Automotive Replacement Battery. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of your battery.
The HumsiENK 48V 150AH battery is designed to deliver reliable, consistent power for various automotive and industrial applications. It features a robust 48-volt system with a 150 amp-hour capacity, engineered for dependable starting power and deep-cycle capabilities.
2. Instrucións de seguridade
WARNING: Failure to follow these safety instructions may result in serious injury, property damage, or battery damage.
- Use sempre o equipo de protección individual (EPI) axeitado, incluíndo lentes e luvas de seguridade, ao manipular baterías.
- Do not short-circuit the battery terminals. This can cause sparks, fire, and severe damage to the battery and connected equipment.
- Keep the battery away from open flames, sparks, and heat sources.
- Ensure proper ventilation during charging and operation to prevent accumulation of gases.
- Do not disassemble, puncture, or modify the battery. There are no user-serviceable parts inside.
- Evite deixar caer a batería nin someterla a impactos fortes.
- Manter fóra do alcance dos nenos.
- Recoméndase a instalación profesional para un rendemento e unha seguridade óptimos.
- In case of contact with battery acid (if applicable for lead-acid, though this is LiFePO4, general caution applies), flush immediately with water and seek medical attention.
3. Contido do paquete
Comprobe que todos os elementos estean presentes e non estean danados ao desembalar.
- HumsiENK 48V 150AH Automotive Replacement Battery (Quantity: 2)
- Manual de usuario (este documento)
Image 1: HumsiENK 48V 150AH Automotive Replacement Battery. This image shows the robust construction and terminal connections of the battery.
4. Produto rematadoview
The HumsiENK 48V 150AH battery is a high-performance power solution for demanding automotive and industrial applications. Key features include:
- Alta capacidade: 48V 150AH for extended power delivery.
- Construción robusta: Engineered to withstand demanding environments.
- Compatibilidade universal: Suitable for various vehicle types and models.
- Deep-Cycle Capabilities: Designed for both starting power and sustained discharge.
5. Configuración e instalación
Note: Professional installation is highly recommended to ensure correct wiring and safe operation.
- Preparación:
- Ensure the vehicle's ignition is off and all electrical loads are disconnected.
- Use lentes e luvas de seguridade.
- Locate the existing battery compartment.
- Removing Old Battery (if applicable):
- Desconecte primeiro o terminal negativo (-) e despois o terminal positivo (+).
- Retire con coidado a batería vella, observando a súa orientación.
- Instalación de batería nova:
- Place the HumsiENK 48V 150AH battery securely in the battery compartment.
- Connect the positive (+) terminal first, then the negative (-) terminal. Ensure connections are tight and secure (M8 terminals).
- Verify that there are no loose connections or exposed wires.
- Verificación inicial:
- After installation, perform a system check to ensure all components are functioning correctly.
6. Instrucións de funcionamento
The HumsiENK 48V 150AH battery is designed for straightforward operation once correctly installed. It provides power to your vehicle's electrical system and is recharged by the vehicle's charging system.
- Ensure the battery is fully charged before initial heavy use.
- Monitor de volumen de bateríatage if your vehicle has a compatible display.
- Evita descargar completamente a batería, xa que isto pode reducir a súa vida útil.
7. Mantemento
Proper maintenance will extend the life and performance of your HumsiENK battery.
- Inspección da terminal: Periodically check battery terminals for corrosion and ensure they are clean and tight. Clean with a wire brush if necessary.
- Limpeza da batería: Keep the battery top clean and dry. A damp cloth can be used to wipe away dirt and grime.
- Cargando: If the vehicle is stored for extended periods, consider using a compatible 48V battery charger to maintain a full charge. Consult your vehicle's manual for specific charging recommendations.
- Almacenamento: Store the battery in a cool, dry place if removed from the vehicle for an extended period. Ensure it is charged to at least 50% before storage.
8 Solución de problemas
If you encounter issues with your battery, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Vehicle not starting / Low power | Low battery charge, loose terminal connections, faulty charging system. | Check terminal connections. Charge the battery with a compatible charger. Inspect vehicle's charging system (alternator, regulator). |
| A batería non mantén a carga | Deep discharge, internal fault, parasitic drain from vehicle. | Ensure battery is not repeatedly deep-discharged. Consult a professional to check for parasitic drains or internal battery issues. |
| Corrosión nos terminais | Environmental factors, loose connections. | Clean terminals with a wire brush and battery terminal cleaner. Ensure connections are tight. |
If troubleshooting steps do not resolve the issue, contact HumsiENK customer support or a qualified automotive technician.
9. Especificacións
| Característica | Detalle |
|---|---|
| Marca | HumsiENK |
| Modelo | 48V 150AH |
| Voltage | 48 V (nominal) |
| Capacidade | 150 AH |
| Peso do elemento | 180 libras |
| Dimensións do produto (P x A x A) | 7.6" x 11.6" x 7.7" |
| Número de celas | 24 |
| Resistencia | 0.05 ohmios |
| Tipo de terminal | M8 |
| Tipo de ajuste automotriz | Ajuste universal |
| Números de peza OEM | 48v150ah-dual, Bt48150-2p |
10. Información da garantía
HumsiENK products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official HumsiENK websitio. Garda o comprobante de compra para reclamacións de garantía.
11. Atención ao cliente
If you have any questions, require technical assistance, or need to report an issue, please contact HumsiENK customer support through the following channels:
- En liña: Visit the official HumsiENK websitio web con recursos de apoio e formularios de contacto.
- Correo electrónico: Refer to your product packaging or warranty information for a direct support email address.
- Tenda Amazon: Tamén podes visitar o HumsiENK Store on Amazon for additional information and support options.
