AUTOMATE Control4 Pulse Pro Hub
AUTOMATIZAR PULSO PRO OVERVIEW
Mellora a túa experiencia con Automate integrando sen problemas as persianas motorizadas Automate cos sistemas de fogar intelixente CONTROL4. O Automate Pulse PRO Hub ofrece unha potente integración con control discreto de persianas e comunicación bidireccional, proporcionando actualizacións en tempo real sobre a posición das persianas e os niveis da batería. Con conectividade sen fíos Ethernet (CAT 5) e de 2.4 GHz, o Pulse PRO Hub garante unha integración fluída da domótica a través dun porto RJ45 de fácil acceso situado na parte traseira do hub. Cada hub admite ata 30 persianas, o que o converte nunha solución versátil para calquera configuración de domótica.
REMATADOVIEW:
| Control4 Version Required | 2.9.0 mínimo |
| Desenvolvedor | anexo 4 |
| Data de lanzamento inicial | 5/28/2019 |
| Data da última modificación | 1/24/2025 |
| Correo electrónico de soporte | utechsupport@rolleaseacmeda.com |
Nota: For support of real time updates the annex4 Link driver is required. You can find the driver at: https://annex4.link/drivers/link
INSTALACIÓN DE HARDWARE
- Install all shades/blinds/motors at desired locations
- Connect the Hub to the Automate Pulse app
- Connect all shades/blinds/motors to the Automate Pulse app
INSTALACIÓN DE UNIDADES
- Place the “Automate Pulse PRO Hub” driver into the project.
- Navigate to the Connections section and select the Network tab.
- Introduza o enderezo IP do concentrador Automate Pulse PRO.
- Confirm that shades have been detected by looking at the Detected Drivers property.
- For each shade that the “Automate Pulse Hub” has added to the connections add an “Automate Pulse Shade” driver to the project.
- Bind the “Automate Pulse Shade” drivers to the “Automate Pulse Hub”.
- a) Once the connection has been bound the driver will automatically populate shade properties.
- Set the ‘Shade Movement Type’ to ‘Move’ or ‘Rotate’ to determine what the driver should control.
- a) ‘Move’ will control basic shade movement.
- b) ‘Rotate’ will control the motor rotation.
- Run the ‘Calibrate’ action on the shade, this will prepare the driver to calculate the travel times of the shades. By doing this the driver will accurately display ramp tarifas para unha mellor experiencia de usuario.
- Actualizar os navegadores.
NOTA: Grayed out sections are part of the hub driver installation.
Este controlador é un controlador de interface para o Rollease Acmeda Automate Pulse PRO Hub. Permite o control IP sobre as persianas Rollease de CONTROL4.
DRIVE FOR THE MOTOR
CARACTERÍSTICAS COMPATIBLES:
- Drag and drop installation
- Easy calibration of shade travel time
- Control of motor rotation and shade movement
PROPIEDADES:
ACCIÓNS:
CONEXIÓNS:
FOR THE HUB
CARACTERÍSTICAS COMPATIBLES:
- Simple installation of the hub driver by connecting the network connection;
- Automatically calculates the travel time of the motors accurate to within 50ms;
PROPIEDADES:
ACCIÓNS:
CONEXIÓNS:
COMMOMS MISTAKES:
- Introdución dun enderezo IP incorrecto na liña de configuración de «Enderezo IP».
- If you’re failing to discover devices double check this!
CONTROL4 SYSTEM CONNECTION:
PREGUNTAS FRECUENTES
Q. No Pulse PRO Hub detected.
A. Asegúrate de que o teu Automate Pulse PRO estea conectado á rede correcta e de que teñas un enderezo IP dispoñible que aínda se comunique coa rede mediante a aplicación Automate Shades.
P. Os límites de sombra non se establecen correctamente.
A. Calibrate shade limits with your Rollease Acmeda remote before setting the appropriate open and close time within CONTROL4 SYSTEM.
P. A sombra non se move en absoluto.
A. Make sure the selected Pulse PRO Hub is the correct Pulse PRO Hub for the shade to be controlled. Confirm the correct bindings are set in the CONTROL4 System connections tab between the Pulse PRO Hub and Shade drivers.
Q. I have multiple Pulse PRO Hubs, what do I do?
A. Load two Automate Pulse PRO Hub drivers. After selecting “Retrieve Hubs” located in the driver actions tab, you will see different Automate Pulse PRO Hubs - select the desired one.
Q. I don’t see any shade bindings in the Pulse PRO Hub driver?
A. Seleccione "Recuperar sombras" situado na pestana de accións do controlador.
Q. How do I scan for available Automate Pulse PRO Hubs?
A. Once the Automate Pulse PRO Hub is properly connected via the Ethernet cable or Wireless network, navigate to the Automate Pulse Hub Properties page within Composer. Select “Retrieve Hubs” located in the driver actions tab.
RECURSOS DE APOIO:
Para obter máis axuda, póñase en contacto co seu venda polo miúdo, visite o noso websitio en www.rolleaseacmeda.com.
rolleaseacmeda.com
0 2025 Rollease Acmeda Group
Documentos/Recursos
 |
AUTOMATE Control4 Pulse Pro Hub [pdfGuía do usuario Control4 Pulse Pro Hub, Pulse Pro Hub, Hub |