ENFORCER by SECO-LARM manufactures professional security and access control products, including sensors, RF wireless receivers, strobes, and sirens.
CURSO is a flagship brand of SECO-LARM USA, Inc., a global provider of physical security and access control systems since 1971. The ENFORCER product line is renowned for its reliability and versatility, catering to residential, commercial, and vehicle security markets.
Key offerings include infrared and wave-to-open sensors, RF wireless receivers and transmitters, electromagnetic locks, keypads, and a wide array of audio-visual signaling devices such as LED strobe lights and sirens. Designed for ease of installation and long-term durability, ENFORCER products are a trusted choice for installers and security professionals worldwide.
Manuais máis recentes de manuals+ elaborado para esta marca.
Preguntas frecuentes sobre manuais, rexistro e asistencia técnica para esta marca.
For models that support it (like the BAQ and SAQ series), flash patterns are adjusted using DIP switches on the circuit board. Always disconnect power before changing DIP switch settings.
Many ENFORCER sensors, such as the SD-9563-KSVQ, are IP65 rated and weather-resistant. However, for outdoor installation, it is recommended to use a waterproof back box and seal the edges with silicone to prevent moisture ingress.
Use a soft, clean microfiber cloth with a mild cleaner. Spray the cleaner onto the cloth rather than directly on the unit, and wipe off any excess liquid immediately to avoid affecting sensor performance.
Standard range is typically up to 500ft (150m), but this can be extended to 1,000ft (300m) using an optional extended range antenna (e.g., SK-91ERSD or SK-93ERSD), depending on the installation environment.
Press and hold the selector button on the receiver for at least 3 seconds until the LED flashes. Then, press the button on the transmitter you wish to learn. The receiver LED will flash to confirm the code has been stored.