Exergen Corporation is a global leader in non-invasive temperature technology, best known for its accurate and gentle Temporal Artery Thermometers used in homes and hospitals.
Exergen Corporation is a prominent manufacturer specializing in infrared temperature sensing technology for both medical and industrial sectors. Based in Watertown, Massachusetts, the company revolutionized thermometry with the development of the TemporalScanner™, a device that measures body temperature via the temporal artery on the forehead. This method provides a non-invasive, accurate, and gentle alternative to traditional oral, rectal, or ear thermometers, making it a preferred choice for pediatricians, nurses, and parents worldwide.
In addition to its widely used consumer and clinical thermometers, such as the TAT-2000 and TAT-5000 series, Exergen produces high-performance non-contact temperature sensors for diverse industrial applications. The company prides itself on its patented Arterial Heat Balance (AHB) technology, which ensures precision by accounting for ambient temperature effects during scanning.
Manuais máis recentes de manuals+ elaborado para esta marca.
Mira vídeos de configuración, instalación e resolución de problemas desta marca.
Preguntas frecuentes sobre manuais, rexistro e asistencia técnica para esta marca.
Clean the probe lens and the body of the thermometer with an alcohol swab or a cotton swab dipped in alcohol. Ensure the lens is dry before reusing. Do not submerge the device in water.
The method depends on your specific model. For the TAT-2000C SmartGlow, tap the main button repeatedly (about 8-9 times) until the F-C mode flashes, then press and hold to switch. Refer to your user manual for model-specific instructions.
A temporal artery temperature is considered a core temperature and is typically about 0.5°C (1°F) higher than an oral temperature, similar to a rectal temperature.
Low readings can occur if the probe lens is dirty, if the scan was performed too quickly, or if the thermometer was not acclimated to the room temperature. Ensure the probe is clean and flush against the forehead during the scan.
The serial number is usually found on the label on the back or bottom of the thermometer.