CyberPower Personal Linux Software User Guide

CyberPower Personal Linux Software

Comezando

Nome
pwrstat A ferramenta de comando do estado de enerxía do UPS.

Sinopse

Descrición
pwrstat is an interface in PowerPaneI for Linux which allows users to receive UPS status and configure UPS settings.

Type the following command to list the manual: man pwrstat

Opcións
Os parámetros pwrstat, as súas funcións e o exampos descríbense a continuación:

Nota 1
Os seguintes argumentos deberían seguir -pwrfail.

Nota 2
Os seguintes argumentos deberían seguir -lowbatt.

Nota 3
Os seguintes argumentos deberían seguir -cloud.

Nota 4

1. Os parámetros de -pwrfail e -lowbatt deben establecerse de forma independente.
2. Both the shell scripts pwrstatd-lowbatt.sh and pwrstatd-powerfail.sh will be copied to Jetc during the installation procedure.
3. The parameter —cmd can be any shell script in the system, and it should be run as root to modify the settings.
4. The default system settings for -pwrfail and -lowbatt

O Exampficheiros para configurar as opcións de pwrstat

• Example 1: Configure the setting when a power failure event occurs. pwrstat -pwrfail -delay 60 -active on -cmd/etc/pwrstatd-powerfail.sh -duration 60 -shutdown on In the setting above, it will take 60 seconds to run a shell script named pwrstatd-powerfail.sh in the directory /etc, and the system will be shut down after a power failure event occurs for 60 seconds.
• Example 2: Configure the setting when the low battery event occurs. pwrstat-lowbatt -runtime -runtime -capacity -capacity – active on -cmd /etc/pwrstatd-lowbatt.sh -duration 1 -shutdown on In the setting above, it will take 1 minute to run a shell script named pwrstatd-lowbatt.sh in the directory /etc, and the system will be shut down when either the remaining runtime is less than 300 seconds, or the battery capacity is lower than 35%.
• Example 3a: Configure a conexión a PowerPanel Cloud.
  pwrstat -cloud -active na conta example@cyberpower.com -contrasinal contrasinal 123
  Assuming PowerPanel Cloud account/password: example@cyberpower.com / pass123. In the setting above, the connection to PowerPanel Cloud will be activated when users correctly enter their PowerPanel Cloud account and password.
• Example 3b: Verifique a conexión a PowerPanel Cloud.

pwrstat -verify

Para verificar se a conta e o contrasinal son correctos, introduza o comando anterior.

Hai tres resultados, descritos a continuación:

1. Cando a conta e o contrasinal sexan correctos, o sistema mostrará Verificar correctamente.
2. Cando a conta ou o contrasinal son incorrectos, o sistema mostrará Verificar fallou.
3. When a network issue exists, the system will show Connect failed

A páxina Daemon

Nome
pwrstatd O daemon do estado de alimentación do UPS.

Descrición
pwrstatd is the daemon of PowerPanel for Linux, which runs immediately when the system starts up and communicates with the UPS.

Type the following command to list the operations and the configuration files of the daemon: man pwrstatd

Operacións do Daemon
Os comandos para operar o daemon pwrstatd e as súas funcións descríbense a continuación:

Configuración Files do Demonio
A configuración files e as súas funcións descríbense a continuación:

Nota 5
pwrstatd.conf pódese editar usando calquera editor de texto. Para comezar a editar a configuración file, type the following command as root:  vi/etc/pwrstatd.conf *

Take the text editor, vi, for example.
Os cambios editados no editor de texto terán efecto despois de reiniciar pwrstatd. Para reiniciar o daemon, escriba o seguinte comando: /etc/init.d/pwrstatd restart

Nota 6
To send the e-mail content in /etc/pwrstatd-email.sh, it is necessary to set ENABLE_EMAIL=yes and enter both the RECEIPT_ADDRESS and the SENDER_ADDRESS correctly in /etc/pwrstatd-lowbatt.sh or /etc/pwrstatd- powerfail.sh. For details about installing the e-mail package in Ubuntu, please refer to troubleshooting 6.

Rexistros de eventos do Daemon
The event logs of the pwrstatd daemon are located in the directory: /var/log. The file chamado pwrstatd.log rexistra todos os eventos de enerxía.

Comprobando a configuración do daemon

Type the following command to show the configuration of pwrstat:

Abaixo está o example for daemon configuration:

Acción por fallo de alimentación:

Acción para batería baixa:

Monitorización do estado do UPS

Type the following command to show UPS properties and the current status:

pwrstat -status
Abaixo está un example para o modelo UPS, CP585:

Nota 7
Algúns dos elementos enumerados anteriormente só se mostrarán cando o modelo de UPS admita as funcións relacionadas.

CYBERPOWER POWERPANEL
Por favor visite https://www.cyberpower.com/content/software/eula/to see the complete EULA terms.