DELL Command Configure Software User Manual

DELL Command Configure Software User Manual

notas, precaucións e avisos

NOTA: UNHA NOTA indica información importante que che axuda a facer un mellor uso do teu produto.

PRECAUCIÓN: UNHA PRECAUCIÓN indica dano potencial no hardware ou perda de datos e indícalle como evitar o problema.

ADVERTENCIA: A ADVERTENCIA indica un potencial de danos materiais, lesións persoais ou morte.

© 2025 Dell Inc. ou as súas subsidiarias. Todos os dereitos reservados. Dell Technologies, Dell e outras marcas comerciais son marcas comerciais de Dell Inc. ou das súas subsidiarias. Outras marcas poden ser marcas comerciais dos seus respectivos propietarios.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOTA: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Comando Dell | Configurar 4.10.1 ou posterior xera un SCE de 64 bits con restricións.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Temas:

• Versión
• Público destinado
• Finalidade do documento

Versión

Este capítulo ofrece un finalview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Entorno de preinstalación de Windows (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Táboa 1. Matriz de versións

NOTA: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Público destinado

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Finalidade do documento

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Acceso a Dell Command | Configurar o instalador

O comando Dell | Configurar a instalación file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Ir a Soporte | Dell.
2. Baixo Con que produto podemos axudarche, introduce o Servizo Tag do teu dispositivo Dell compatible e fai clic Enviar, ou faga clic Detectar ordenador persoal.
3. Na páxina de asistencia ao produto do seu dispositivo Dell, faga clic Controladores e descargas.
4. Fai clic Busca manualmente un controlador específico para ti [modelo].
5. Comproba Xestión do sistema caixa de verificación baixo Categoría despregable.
6. Localizar Comando Dell | Configurar in list and select Descargar no lado dereito da páxina.
7. Localiza o descargado file no teu ordenador (en Google Chrome, o file aparece na parte inferior da xanela de Chrome) e executa o executable file.
8. Siga as instrucións en pantalla.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Temas:

• Sistemas operativos compatibles con Windows
  
• Plataformas compatibles
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Sistemas operativos compatibles con Windows

Táboa 2. Sistemas operativos compatibles

Plataformas compatibles

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOTA: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOTA: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Requisitos previos

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOTA:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft .NET Framework 4.8 or later version from the Activa ou desactiva as funcións de Windows pantalla.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Fai dobre clic no DUP descargado, fai clic en Si e, a continuación, fai clic en INSTALAR.
   O comando Dell | Aparece o asistente de configuración de instalación.
2. Executa o asistente de instalación.
   Para obter máis información, consulte Execución do asistente de instalación.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Executa o seguinte comando:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Fai dobre clic no paquete de actualización de Dell (DUP) descargado e fai clic en Si.
2. Fai clic en EXTRAER.
   Móstrase a xanela Buscar cartafoles.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Para view o extraído files, fai clic View Cartafol.
   O cartafol contén o seguinte files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Para acceder ao comando Dell | Configurar o asistente de instalación, fai dobre clic en Command_Configure.msi.
6. Executa o asistente de instalación.
   Para obter máis información, consulte Execución do asistente de instalación.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Executar o asistente de instalación

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Command_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Móstrase o asistente de instalación.
3.  Fai clic en Seguinte.
   Móstrase a pantalla Acordo de licenza.
4. Le o contrato de licenza e fai clic en Acepto os termos do contrato de licenza e, a continuación, fai clic en Seguinte.
   Aparece a pantalla Información do cliente.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Móstrase a pantalla de configuración personalizada.
6. Fai clic en Seguinte para instalar Dell Command | Configure a CLI e a GUI no directorio predeterminado. O comando Dell predeterminado | Configurar os directorios de instalación son:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   Aparece a pantalla Listo para instalar o programa.
7. Fai clic en Si.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Fai clic en Finalizar.
   Se o comando Dell | Configurar GUI instalouse correctamente, o atallo para a GUI móstrase no escritorio.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOTA: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOTA: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Vaia ao cartafol onde aparece o comando Dell | O instalador de configuración extrae do paquete de actualización de Dell (DUP).
2. Open Command Prompt as administrator.
3. Executa o seguinte comando: msiexec.exe /i Command_Configure.msi /qn
   O comando Dell | Os compoñentes de configuración instálanse silenciosamente nos seguintes lugares:
   ● For 32-bit systems, C:\Program Files\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Instalación cos idiomas admitidos

To assess silent and unattended with supported languages, run the following command: msiexec /i Command_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 - Taiwán chinés
• 1031 - alemán
• 1033 - Inglés
• 1034 — castelán
• 1036 — Francés
• 1040 - italiano
• 1041 - xaponés
• 1043 - holandés
• 2052 - Chinés simplificado
• 3076 - Hong Kong chinés

NOTA: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Abre o Panel de control.
2. Ir a Programas > Programas e funcionalidades.
3. Find Dell Command | Configure na lista.
4. Right-click it and select Desinstalar.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOTA: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOTA: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOTA: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOTA: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Siga os seguintes pasos para actualizar Dell Command | Configure (anteriormente Dell Client Configuration Toolkit) coa seguinte versión:

1. Double-click the downloaded DUP, and then click INSTALAR.
   O comando Dell | Iníciase o asistente de instalación de configuración.
2. Executa o asistente de instalación e siga as instrucións que aparecen na pantalla.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Descarga a última instalación file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the filee, a continuación, execute o seguinte comando:
   msiexec.exe /i Command_Configure.msi REINSTALL=TODO REINSTALLMODE=VOMUS
   NOTA: Aparece a pantalla do asistente de instalación seguida de “Unha versión anterior de Dell Command | A configuración detectouse neste sistema. Se continúa, o instalador eliminará a versión antiga e procederá a instalar a versión máis recente. Se cancela a instalación da última versión, o sistema non se restaurará á versión anterior de Dell Command | Configurar. Queres continuar?" mensaxe.
3. Siga as instrucións da pantalla para actualizar.
   NOTA: Para unha actualización silenciosa, execute o seguinte comando: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Actualizando no cartafol predeterminado

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Navegue ata o cartafol no que extraeu o comando Dell | Configure o instalador desde o paquete de actualización de Dell (DUP).
2. Executa o seguinte comando: msiexec.exe /i Command_Configure.msi /qn
   O comando Dell | Os compoñentes de configuración instálanse silenciosamente nos seguintes lugares:
   ● For 32-bit systems, C:\Program Files (x86)\Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86)\Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Temas:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Táboa 4. Sistemas operativos compatibles

Supported Platforms for Linux

Table 5. Supported platforms

NOTA: Platforms must support WMI-ACPI BIOS for full functionality.

NOTA: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOTA:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOTA:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
A ruta de instalación predeterminada é /opt/dell/dcc.

Requisitos previos

• A estación de traballo debería executarse nun sistema operativo Linux compatible.
• Descarga bibliotecas openSSL 1.x para instalar e executar Dell Command | Configurar en Red Hat Enterprise Linux 8 e Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Desde dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar o file usando o seguinte comando:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar o file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Versión>_ .tar.gz contén os seguintes paquetes que deben instalarse na seguinte orde:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOTA: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get -f install
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   A ruta de instalación predeterminada é /opt/dell/dcc.
   NOTA: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get -f install

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOTA: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Para desinstalar Dell Command | Configure nos sistemas que executan Red Hat Enterprise Linux 8 ou 9, execute os comandos na seguinte orde:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi-.el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOTA: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Para desinstalar Dell Command | Configurar e eliminar a configuración files e temporal files, run the following command: dpkg –purge command-configure
2. Para desinstalar Hapi e eliminar a configuración files e temporal files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Actualice a versión de Dell Command | Configurar no sistema.

NOTA: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files e cartafoles do sistema. O files e cartafoles non teñen ningún impacto funcional.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar o file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh –nodeps srvadmin-hapi-..x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar o file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Para actualizar, execute o seguinte comando:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Para verificar o comando Dell actual | Configura a versión, vai á ruta de instalación predeterminada e executa:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Este capítulo ofrece un finalview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Temas:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOTA: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Requisitos previos

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server cargas útiles.

Asegúrese de que se cumpren os seguintes requisitos:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Móstrase o asistente de instalación.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Fai clic en Seguinte.
4. Fai clic en Instalar para comezar a instalación.
   The installation completion wizard is displayed.
5. Fai clic en Finalizar para completar a instalación.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOTA: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file no URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOTA: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file co seguinte:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   "Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOTA: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOTA: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOTA: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Creación dun ambiente de preinstalación de imaxes de arranque usando Windows PE 10.0 e 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Desde Microsoft websitio, descargue e instale Windows ADK no sistema cliente.
   NOTA: Durante a instalación, seleccione só Ferramentas de implantación and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Instalar Dell Command | Configurar.
4. Integrar o comando Dell | Configura a estrutura do directorio nunha ISO file para crear unha imaxe ISO de arranque.

Integrando o comando Dell | Configura a estrutura do directorio nunha ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Instala o sistema operativo Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86_64.
2. Abre o símbolo do sistema con privilexios de administrador.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOTA: Asegúrese de que a ruta que se utiliza no comando é a do comando Dell | Configurar cartafol.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Recursos e apoio

Podes acceder aos documentos necesarios seleccionando o teu produto.

1. Ir a Soporte | Dell.
2. Fai clic Busca todos os produtos.
3. Fai clic Software & Solutions.
4. Fai clic Xestión de Sistemas Clientes.
5. Fai clic Dell Command | Configure.
6. Fai clic Select This Product.
7. Para view os documentos necesarios, faga clic no nome do produto e no número de versión necesarios.

NOTA: Se non tes unha conexión a Internet activa, podes atopar información de contacto sobre a túa factura de compra, albarán, factura ou catálogo de produtos Dell.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Ir a Soporte | Dell.
2. Seleccione a súa categoría de soporte.
3. Verifica o teu país ou rexión no Escolla un país/rexión lista despregábel na parte inferior da páxina.
4. Seleccione o servizo ou ligazón de soporte axeitado segundo a súa necesidade.