ESBE CRK210 Controller User Guide

ESBE CRK210 Controller

Serie ESBE CRK210 son actuadores combinados con controladores. A gama CRK210 ofrece un control constante da temperatura de caudal para dispositivos con función combinada de calefacción e refrixeración. A serie CRK210 está pensada para ser utilizada con válvulas da serie VRx.

Operación

• The CRK210 is a constant temperature controller intended for applications where a constant flow temperature is desired. The controller is integrated with an actuator and is designed to be used with rotating mixing valves series VRx.
• The Series CRK210 consists of two main components: an actuator and a flow temperature sensor. The primary function of the controller is to maintain a constant set temperature at the sensor location. The series includes a T/T2 (main temperature to alternative temperature) setting, which also controls the opening direction of the actuator. This feature is intended for devices with combined heating and cooling functions set by relay. Additional equipment, such as a clock, may be needed to release the relay if the heating/cooling unit lacks an available control signal. Releasing the relay changes the actuator’s working direction to match the source unit’s mode (heating or cooling). Settings are adjusted via a joystick and displayed on a screen.

Introduction of ESBE Self-Adaptive System

The ESBE Self-Adaptive System manages PI factors (Proportional gain and Integral response) by learning system behaviors and addressing issues previously managed by installers. This system ensures smooth controller operation, eliminates issues related to delays or response times, and delivers high control standards and comfort. This makes the CRK210 Series suitable for any system setup or environment.

INSTALACIÓN

• Alimentación mediante adaptador de 230 V AC (completo de transformador, cable e enchufe de parede).
• O sensor de temperatura de caudal inclúe un cable de 1,5 m incluído (cable máis longo dispoñible como accesorio). O sensor debe estar coidadosamente illado da temperatura ambiente.
• Grazas á interface especial entre o controlador da serie CRK210 e a serie ESBE VRG e VRH, a unidade no seu conxunto ten unha estabilidade e precisión únicas á hora de regular.

Equipo opcional

• Art. No. 16200700: ARA801 Auxiliary switch kit
• Art. No. 17053100: CRA911 Flow temperature sensor, 5m cable
• Art. No. 17056200: CRA915 UK plug

Válvulas de mestura adecuadas

• Serie VRG130
• Serie VRG230
• Serie VRG330
• Serie VRH130
• Serie 3MG
• Serie 3G
• Series 3F DN50

Adaptador Kits
Required adaptor kits for easy fitting onto an ESBE rotary mixing valve series VRx are supplied with each controller. Adaptor kits can also be ordered separately.

• Art. No. 16000500: ESBE valve series VRG, VRH, G, MG, F
• Art. No. 16000600: Meibes
• Art. No. 16000700: Watts
• Art. No. 16000800: Honeywell Corona
• Art. No. 16000900: Lovato
• Art. No. 16001000: PAW
• Art. No. 16001100: Wita Minimix, Maximix

Controlador

Technical Data Details

• Ambient temperature: max. +55°C, min. -5°C
• Tipo de sensor: NTC
• Temperature range: Flow temperature sensor +5 to +95°C
• Enclosure rating, Actuator unit: IP41
• Clase de protección: II
• Power supply, Actuator unit: 230 ± 10% V AC, 50 Hz
• Power consumption (230 V AC): 10 VA
• Torque (Actuator): 6 Nm
• Running time at max. speed (Actuator): 30s
• ErP Temperature control class: N/A
• Energy efficiency contribution: N/A

Complies with LVD 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU

INSTALACIÓN EXAMPLE

Temperatura de caudal constante que vai ao circuíto de calefacción
O CRK210 controla e asegura a temperatura de caudal establecida. O controlador está conectado ao dispositivo cunha función combinada de calefacción e refrixeración. A conexión realízase mediante relé, que cando se solta cambiará a dirección de apertura do CRK210. Esta característica permite que o CRK210 axuste o principio de traballo entre o modo de traballo de calefacción ou arrefriamento do dispositivo de calefacción/refrixeración.

As aplicacións mostradas son só examples of product use! Before using the product in any application, the regional and national regulations need to be checked.