FlySpark F4 V1 Stack Flight Controller
Especificacións
- Nome do produto:
Pila FlySpark F4 V1 BLS 60A - Características da IA:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Soporte de software:
Betaflight, INAV, Ardupilot, EMU-flight, SkyBrush - ESC Communication:
BLHeli_S Bluetooth e USB-C - Conectividade:
3-6S LiPo - Dimensión:
47.8 mm (L) x 47.5 mm (An) x 18.3 mm (Al) - Montaxe:
30.5 x 30.5 mm cun tamaño de orificio de 4 mm - Peso:
34 g
Instrucións de uso do produto
Controlador de voo FlySpark F4 V1
Deseño:
Refer to the user manual for the layout of the flight controller.
Conexión periférica:
Connect peripherals as per the provided diagram.
Configuración da aplicación e FC:
Use the recommended apps and follow the configuration instructions.
Actualización de firmware FC:
Connect the flight controller to a PC via USB for firmware updates.
ESC 60 EN 4 FLYSPARK BLS 1A
Deseño:
Check the layout guide in the manual for proper installation.
Conexión con motores e cable de alimentación:
Connect motors and power cables securely.
Configuración ESC:
Use the FlySpark app for ESC configuration settings.
Actualización do firmware ESC:
Follow the provided steps to update the firmware for ESC.
Pila FlySpark F4 V1 BLS 60A
Especificacións rematadasview
Paquete
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF Condensador ESR baixo x 1
- Porca de nailon M3 x 4
- Cable SH 1.0 mm 25 mm de lonxitude 8 pines (para conexión FC-ESC) x 1 SH 1.0 mm 75 mm de lonxitude Cable de 6 pines* x 1
- Parafusos hexagonales internos M3*30 mm x 4
- Cable DJI de 6 pines (80 mm) x 1
- Cable de alimentación XT60 (100 mm) x 1
Diagrama de conexión FC
Guía de conexións FC e ESC
Método 1:
- Using 8.Pin JST Cable
Método 2:
Soldadura directa
- Soldar 8 fíos ás 8 almofadas de cada extremo, seguindo as definicións de almofadas a continuación
Especificacións do controlador de voo
- Use o cable de 6 pinos que vén coa unidade de aire O3
- Use o cable de 6 pinos que vén co FlySpark F4 V1 BLS 60A Stack
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Nota:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Conexión con motores e cable de alimentación
ESC Specs FlySpark F4 V1 BLS 60A Stack
Actualización de firmware ESC
Este ESC 8A de 50 bits vén precargado co firmware BLHeliS, pero tamén se pode flashear ao firmware Bluejay, que ofrece filtrado RPM e compatibilidade con Dshot bidireccional. Siga estes pasos para actualizar o firmware:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Conectar ao PC:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
PRECAUCIÓNS:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
Preguntas frecuentes
Como actualizo o firmware ESC?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Documentos/Recursos
 |
FlySpark F4 V1 Stack Flight Controller [pdfManual do usuario F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |