LTECH KMS1 Switch Module
Introdución do produto
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Especificacións técnicas
| Modelo | KMS1 |
|---|---|
| Tipo sen fíos | Materia sobre Thread |
| Cambiar de canle | 1CH |
| Vol. Operativotage | 100-240 V~, 50/60 Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Corriente de sobretensión de relé | 70A @ 10 ms |
| Temperatura de traballo | -25°C~50°C |
| Tamaño do produto | L45×W45.5×H20.5(mm) |
| Peso do produto | 38 g |
| Estándares | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Imaxes do produto
DIMENSIÓN
- Unidade: mm
- Dimensións: 45 x 45.5 x 20.5
Diagrama de cableado
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
Use a APLICACIÓN NFC Lighting
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Editar parámetros
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Modelos compatibles
Configuración Example
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Engadir accesorios
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Dispositivo de control
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Funcións avanzadas
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Restaurar a configuración de fábrica
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Restablecemento de acendido
No caso dunha alimentación outage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Atención
- A instalación e posta en servizo do produto debe ser realizada por un profesional cualificado.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- A boa disipación da calor prolongará a vida útil dos produtos. Asegúrese de que exista unha boa ventilación.
- Comprobe se o volume de traballotage usado cumpre cos requisitos de parámetros dos produtos.
- O diámetro do fío empregado debe ser capaz de cargar as luminarias que conecte e garantir o cableado firme.
- Antes de encender os produtos, asegúrese de que todo o cableado estea correcto en caso de conexión incorrecta que cause danos nas luminarias.
- Se se produce un fallo, non intente arranxar os produtos por si mesmo. Se tes algunha pregunta, ponte en contacto cos teus provedores.
Acordo de garantía
Prazos de garantía desde a data de entrega: 2 anos. Os servizos de reparación ou substitución gratuítos para problemas de calidade ofrécense dentro dos períodos de garantía.
Exclusións da garantía
- Máis aló dos períodos de garantía.
- Calquera dano artificial causado por alto voltage, sobrecarga ou operacións inadecuadas.
- Produtos con grave dano físico.
- Danos causados por catástrofes naturais e causas de forza maior.
- As etiquetas de garantía e os códigos de barras danáronse.
- No contract signed by our company.
Documentos/Recursos
 |
LTECH KMS1 Switch Module [pdfManual do propietario KMS1 Switch Module, KMS1, Switch Module, Module |