MULTIBRACKETS 5605 Wall Bracket

Especificación

• Produto: MULTIBRACKETS 5605 Universal Wall Bracket / Long Reach Arm Mount
• Tipo: Full-motion articulating TV wall mount (dual arm long-reach swivel)
• Cor: Acabado metálico negro
• Material: Heavy-duty solid steel construction
• Screen Compatibility: Fits most flat-panel TVs 65″ – 110″ diagonal
• Max screen diagonal: ~279 cm (110″)
• Capacidade de peso: Up to 125 kg (~275 lbs) load support
• Soporte VESA: Compatible with most VESA patterns from 100×100 mm up to 800×600 mm
• Movement & Adjustment: Full-motion swivel, tilt, and rotate at multiple pivot points
• Rango de inclinación: approx. -5° to +10°
• Swivel/rotation: approximately 60° to +60°
• Extension from wall: up to 980 mm (~38.6″)
• Características:
  • Dual long-reach arms for flexible viewing posicións
  • Smart cable management system to hide cables
  • Partially pre-assembled with a full hardware kit included
• Tipo de instalación: Wall mount, articulating bracket
• Cor: Negro

IMPORTANTE!
Your Plasma. LCD. TV, Projector, Projector Screen, or other HiFi equipment represents a considerable value.
If screws are Included they may not be suitable for the material of your wall, ceiling, or floor. Replace the screws with suitable ones if needed.
In case you are unsure regarding any aspects or the mounting of this product,t please
Consulta cun profesional.

Aviso!
Sempre comprobar o profundidade of o buratos antes comezando an instalación.

Fits most 65″-110″ flat panel TV

• Weight capacity: 125kg/275 lbs
• VESA compliance: 100×100 200×200 300×300 400×200 400×400 600×400 800×600

AVISO 
Unha instalación ou unha montaxe inadecuadas poden producir danos persoais graves e danos materiais. Lea atentamente a seguinte advertencia antes de comezar.

• Os produtos deben ser instalados por profesionais.
• Se non entendes as instrucións ou tes dúbidas ou preguntas, ponte en contacto cun instalador local cualificado.
• Non instale nin monte se o produto ou o hardware están danados ou faltan. Se precisa de pezas de recambio, póñase en contacto co seu distribuidor local para obter axuda.
• This product fits most65″-11D”LCD and plasma screens; maximum weight of LCD /plasma screen: 125kg.
• This product has been designed for use on masonry (solid concrete, 2000 PSI density minimum).
• For safe installation. The wall you are mounting to must support a minimum of 3 times the weight of the total load (the mount, the TV, and all accessories).
• Non use este produto para ningunha outra aplicación que non sexa o orixinal.
• This product contains moving parts; please use it with caution.
• When installing a flat panel display, please do not damage the electrical wiring or the power source.
• O fabricante non asumirá ningunha responsabilidade pola montaxe na parede vertical, nin os danos incidentais ou consecuentes derivados da mesma.
• O fabricante declina toda responsabilidade polas modificacións, instalacións incorrectas ou instalacións dentro do rango de peso especificado.
• The manufacturer will not be liable for any damages arising out of the use of, or inabilityto use, the product.

Lista pasada

INSTALACIÓN

INSTALLATION OPTION 1: Wood Stud Installation (Suitable for 16″ or 24″ apart studs)

1. Use a stud finder to locate the drywall studs and mark the desired installation locations with a pencil.
2. Coloque a plantilla da placa de parede (BB) á parede no lugar de instalación desexado.
3. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall. Attempt to locate the lag bolt locations in the middle of the studs.
4. Use a 7/32″ (5.5mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm).

Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Secure the Wall Plate to the wall with 6 x Lag Bolts ( H) and 6 x Washers (H).

NOTA: Do not use Wall Anchor (I) for wood stud installation.

OPCIÓN DE INSTALACIÓN 2: Instalación de muro de formigón/ladrillo

1. Coloque a plantilla da placa de parede (BB) á parede no lugar de instalación desexado.
2. Ensure the Wall Plate Template (BB) horizontal alignment is verified with a bubble level, and mark 6 lag bolt installation locations on the stencil and the wall.
3. Use a 3/8″ (10 mm) drill bit to drill a pilot hole in the wall with a depth of at least 2.6″ (65mm). Please note that failure to drill pilot holes may result in the lag bolt heads snapping during installation.

Insira 6 x ancoraxes de parede (I) nos buratos. Asegure a placa de parede á parede con 6 x parafusos (H) e 6 x arandelas (H).

This full motion TV wall mount comes with a sliding mechanism that allows the arms and the TV to slide horizontally left or right for up to 15. 7 inches, while the wall plate is stationary on the wall. This feature allows the TV to be placed at an optimal position, regardless of the position of the wall studs. The mount will ship with the locking bars installed in place at their center position. If the sliding function will be used, take off the locking plates by removing the bolts that hold them in place.

Place the top locking bar at the desired position to fix the left slide limit of the arms, and place the bottom bar at the desired position to fix the right side limit of the arms. The raised metal piece at the end of the locking bars limits the slide of the arms. Ensure the locking bars are oriented correctly to ensure both the left and right side locking bars correctly limit the slide. Ensure both of the bolts are tightened at each locking bar’s position to prevent the arms from sliding off the wall plate.

AVISO: FAILURE TO INSTALL THE LOCKING BARS ADEQUATELY MAY RESULT IN THE ARMS AND THE TV FROM SLIDING OFF THE WALL PLATE.

Attaching the TV to the Mount (For Displays With Smaller Bolt Hole Patterns)
For TVs with smaller bolt hole patterns of VESA 100×100, 100×200, 200×100, and 200x200mm, the TV can be mounted directly on the plate, without the extension bars.

Colocación do televisor ao soporte (para pantallas con patróns de orificios para parafusos máis grandes) Para televisores con patróns de orificios para parafusos máis grandes de VESA 300×300,400×200,400×400,600×400, 800×600 mm, use os soportes de TV e as barras de extensión para instalar o TV ao monte.

Attach the 2 x TV Brackets to the back of the TV by using screws A+E, B+E, C+E, or Dor G.

NOTA: The hardware packet provided fits most TVs in the market. If your TV requires different hardware, please contact us at mount-it.com to procure additional hardware kits.

Ensure the screws are adequately engaged with the screw holes on the TV.
Do not overtighten the screws. Ensure the TV brackets sit flat with the back of the T.V.

Hangina g TV On The Wall Mount Arms

Lift the TV (two persons recommended) and hang the TV brackets onto the wall mount extension bars.

Asegurando a TV no monte

Secure the TV brackets on the mount by attaching the 4 x AA Safety Brackets with 4 x F Screws as shown ointhe image.

NOTA: Se non se fixan os soportes do televisor ao soporte con soportes de seguridade AA, pode producirse un levantamento accidental do televisor das barras de extensión, o que pode provocar danos corporais ou materiais.

Axuste de nivelación -5° – +5°
The mount allows up to 5 degrees of leveling adjustment post installation. To adjust the level of the TV, place a bubble level on top of the TV, loosen the 2 x G bolts located behind the VESA plate, level the TV, and tighten the 2 x G bolts to lock the TV in position.

Axuste de inclinación -5° – +10°

The mount can tilt down up to 10 degrees and up 5 degrees. To adjust the tilt angle of the TV, pull out the tilt adjustment levers on both sides of the mount and turn counterclockwise to loosen the screws. Adjust the tilt to the desired angle and turn the tilt adjustment lever clockwise to tighten the screws.

NOTA: IF THE TV TILTS DOWN AFTER A PERIOD OF USE, CHECK THE TILT ADJUSTMENT LEVER TIGHTNESS AND TIGHTEN IF NECESSARY.

Use os clips de xestión de cables integrados nos brazos para dirixir os cables á parte traseira ou ao lado do televisor.

Dimensión

TARXETA DE GARANTÍA

MULTIPALQUETAS “™ Limitado Garantía

Soportes múltiples garantías o seu produtos a be gratuíto of defectos in material e mano de obra para o de produto Garantía Período.

O Garantía período comeza on o orixinal compra data of o produto

Todos Soportes múltiples produtos son cuberto by a limitado produto garantía

• CINCO (5) anos para metal vídeo monitor mounts, todos bastidorese non-electrical rack accesorios
• DOUS (2) anos para gaslifts e sit-stand estacións de traballo
• UN (1) ano para todos motorizado e/ou automatizado produtos, plástico altofalante mounts, todos altofalante stands, todos mobles, todosmadeira (MDF) accesorios

Para garantía reivindicacións feita durante o Garantía Período, MULTISOPORTE vontade substituír calquera defectuoso produto parte gratuíto of charge. Should a parte on teu Soportes múltiples produto fail, por favor crear anRMA caso on www.multibrackets.com/support a facer a garantíareclamación. We vontade await teu documentación e entón discuss oproblema con ti, e unha vez we confirm o produto is baixo guerraranty, we vontade barco substitución pezas a ti. Isto Limitado Garantíafai non cuberta o custos of eliminando e substituíndo defectuoso pezasdende teu Soportes múltiples produto. Entón, if teu problema require areparación technician, ti debe pagar calquera laboral cargos.

For warranty claims made during the Warranty Period, MULTI BRACKETS will replace any defective product part free of charge. Should a part of your Multibrackets product fail, please create an RMA case on www.multibrackets.com/support to make a warranty claim. We will await your documentation and then discuss the problem with you, and once we confirm the product is under warranty, we will ship replacement parts to you. This

Limited Warranty does not cover the costs of removing and replacing defective parts from your Multibrackets product. So, if your problem requires arepair technician, you must pay any labor charg.es This Limited Warranty extends only to the original purchaser of the product and is automatically void if your Multibrackets product is modified in any way, improperly installed, taxed beyond its stated weight capacity, or otherwise misused or abused.

All Multibrackets products are intended for indoor use only, and any outdoor use voids this Limited Warranty. The Limited Warranty for wall and ceiling mounts is void if the mount is moved from its initial installation. To the maximum extent permitted by applicable law, Multibrackets disclaims any other warranties, express or implied, including warranties of fitness for a particular purpose and warranties of merchantability. Multibrackets will not be liable for any damages whatsoever arising out of the use or inability to use itsproducts, even if Multibrackets has been advised of the possibility of such damages. To the maximum extent permitted by applicablelaw, Multibrackets disclaims any responsibility for incidental or consequential damages,

Multibrackets M Stockholm, Sweden 2016. www.multibrackets.com

The content of this manual is subject to Change wltheut further notice. The latest vers, on of this manual can be found online under the product name on the websitio: www.multibrackets.com

 

Documentos/Recursos

MULTIBRACKETS 5605 Wall Bracket [pdfGuía de instalación 5605 Wall Bracket, 5605, Wall Bracket, Wall Bracket, Wall, Bracket

Referencias

• Manual de usuario