NYX HYPERION3 Magnetic Split Controller User Manual

HYPERION3
For NS 2
MAGNETIC SPLIT CONTROLLER

Querido xogador,
Grazas pola compraasino noso produto.
Antes de usar o produto, lea atentamente o manual do produto.

Compatibilidade
Supports Switch2 host system 20.0 and above

Contido do paquete

Left controller x1, right controller x1, rechargeable center bridge x1, replaceable D-pad x1, USB-C charging cable x1, product user manual (warranty card) x1

Technical Parameters of Game Controller
Product Model: NS-202
Product Code: NJ22
Material: ABS
Weight: 215g (for left and right controllers together)
Entrada: 5V 500 mA
Vol. Operativotage: 3.7 V
Corriente de carga: 400 mA
Battery Capacity: Left Controller: 600mAh
Right Controller: 600mAh
Operating Current: Without Motor Vibration: ~60mA
With Motor Vibration: ~100mA
Dimensions: Left Controller: 61.2*116.7*52.2 mm
Right Controller: 61.2*116.7*52.2 mm

Technical Parameters of Center Bridge
Material: ABS
Peso: 50 g
Entrada: 5V1000 mA
Vol. Operativotage: 5 V
Corrente operativa: 800mA
Charging Current (per side): 200mA
Dimensións: 115.6*46*16 mm

Descrición do produto

Connection Tutorials

NS2
Required System: Version 20.0 or higher
Conexión por cable
Align the left controller’s ‘-‘ key and the right controller’s ‘+’ key upwards, then magnetically attach them to the corresponding magnetic ports on both sides of the console. The console will indicate a successful match with a connection animation on both sides.

Conexión Bluetooth
Power on the Switch 2 console. On the main interface, tap the controller icon with your finger, then select the “Change Grip/Order” screen. Press and hold the SYNC button on the left (or right) controller for 3 seconds until the RGB indicator flashes rapidly, entering Bluetooth pairing mode. The console will automatically search for and pair with the controller.
After successful connection, the controllers’ RGB indicators will display solid lights in the following channel colors:
Channel 1: Solid Orange
Channel 2: Solid Green
Channel 3: Solid Blue
Channel 4: Solid Purple
Reconexión Bluetooth
After initial pairing, if the controller is in sleep mode and the console is on, press any button (except L3, R3, TURBO) to reconnect via Bluetooth. (Note: Avoid touching the joysticks during reconnection.)
Bluetooth Wake-up
After initial pairing, if both the console and controller are in sleep mode, press the Home button on the right controller to wake up the console and reconnect.
Key linker App Connection

APP QR Code:

http://gpcloud.smart-one.cn/keylinker/

1. Use a mobile browser to scan the QR code or search for “Key Linker” in your app store to download and install.
2. After installation, upon first launch, the app may request relevant permissions; grant them as prompted.
3. Connect your phone’s Bluetooth in Android/iOS mode, find the device
   named “NYXI NJ22”, and tap to pair.
4. After successful connection, tap the settings button next to the device name to enter the controller customization interface.
5. Buttons can be remapped to any other key. Joystick and trigger curves can be adjusted. Motor vibration intensity can be modified. Turbo function speed can be set. Macro programming allows adjusting interval times. Power-off timing and other settings can also be configured.
6. After modifying functions, click “Apply” to save the changes.

Guía de funcións

Función Turbo

1. Assign Turbo: On the left controller, hold the Turbo button + UP, DOWN, LEFT, RIGHT, ZL, or L. On the right controller, hold Turbo + А, В, X, Y, ZR, or R to assign turbo to that button. Then hold that assigned button to enable rapid-fire. The RGB indicator flash frequency matches the turbo speed.
2. Auto Turbo: Press and hold the left Turbo button + UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button + A, B, X, Y, ZR, R (for right controller) again to set the corresponding buttons to auto turbo mode.
3. Cancel Turbo: Press and hold the left Turbo button + UP, DOWN, LEFT, RIGHT, ZL, L (for left controller) or the right Turbo button + A, B, X, Y, ZR, R (for right controller) again to cancel the turbo function for the corresponding buttons.
4. Clear All Turbo: Press and hold the left Turbo button (for left controller) or the right Turbo button (for right controller) for 5 seconds. The controller will vibrate for 1 second, indicating that all turbo assignments for that controller have been cleared.
5. Turbo Speed Adjustment: There are three adjustable speeds: Fast /Medium / Slow. To increase the turbo frequency, hold Turbo + push the joystick up. To decrease, hold Turbo + push the joystick down. The default speed is Medium. The controller will vibrate briefly each time the turbo speed is adjusted.

Back Button Mapping & Macro Programming
The two customizable buttons GL/GR on the back of the controller can be mapped to specific function keys (GL can be mapped to: UP, DOWN, LEFT, RIGHT, L, ZL, L3, -; GR can be mapped to: A, B, X, Y, R, ZR, R3, +).

Pasos da operación:

1. While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter the GL/GR button customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for 1 second as a reminder.
2. After entering GL (or GR) button customization mode, press a desired function key (e.g., L button for GL or A button for GR). The lit indicator will flash once, confirming that the key has been mapped to the corresponding GL/GR button. Press the GL (or GR) button again to exit customization mode for that controller. The controller will vibrate for 1 second, and the RGB indicator will return to its original channel indication. Follow the above steps to set the GL/GR buttons.
3. During customization, multiple function keys can be input in sequence for a single GL/GR button, then press the GL/GR button again to exit and save as a macro key. In-game, pressing this key will execute the sequence according to the interval times set during programming. When GL/GR is used as a macro key, a single custom button can store up to 21 key inputs. Once 21 keys are entered, the macro will be saved automatically, and the programming mode will exit, restoring the current channel indicator.
4. Clearing GL/GR Custom Button Functions: While connected to the host, hold the TURBO button and press the GL/GR button once, then release to enter GL/GR customization mode. The RGB indicator will flash white rapidly, and the controller will vibrate for 1 second. Briefly press the GL/GR button to clear the custom functions assigned to it. A successful clear is indicated by 1 second of vibration. After clearing, the button will return to a no-function state.

Axuste da intensidade da vibración

1. The vibration intensity of the grip motors can be adjusted to 3 levels (Off/Low/High). The factory default is Low, and the Off level disables vibration.
2. For the left or right controller, holld the TURBO button and push the joystick left (decrease) or right (increase) to adjust the grip vibration intensity. The levels cycle through Off Low High. After each adjustment using the combo, the controller will vibrate at the corresponding intensity for 1 second. When set to Off, there will be no vibration. The current vibration intensity will be remembered even after the controller is powered off.

Iluminación RGB

1. Hold the TURBO button and single-press the left controller’s – button or the right controller’s + button to cycle through one mode per press. There are multiple lighting effect modes, including eight solid color modes (Red, Orange, Yellow, Green, Blue, Indigo, Purple, Pink) and one mixed-color mode (the four LEDs are: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
2. Hold the TURBO button and double-press the left controller’s L3 or the right controller’s R3 button to turn off all RGB lighting (including the RGB joystick ring and RGB channel indicator).
   Press the same combination again to activate mixed-color breathing mode (LEDs: top-left Yellow, bottom-left Blue, top-right Red, bottom-right Green).
   Press the combination a third time to activate mixed-color flowing light mode (Yellow, Blue, Red, Green) – the left joystick ring flows clockwise, and the right joystick ring flows counter-clockwise.
3. Hold the TURBO button and press and hold the left controller’s L3 or the right controller’s R3 button. The brightness will cycle from dim to bright. Release the button to set the brightness to the current level. Each operation is confirmed by a vibration prompt. The controller will remember the last lighting effect state (except in lock mode, where it will revert to mixed-color flowing light mode upon the next power-on).

Encendido/apagado
Power On (Reconnect): In off state, press any button to power on and enter reconnect mode.
Power On (Pairing): In off state, hold SYNC for 3 seconds to power on and enter pairing mode.
Power Off: In on state, hold the left controller’s Capture button / right controller’s Home button for 3 seconds.
Immediate Power Off: In on state, short press the SYNC button.
Auto Power Off: The controller will power off if the connected host enters sleep mode or turns off Bluetooth.
Aviso de batería baixa
Low Battery Warning When the controller’s battery voltage drops below 3.5V during connected use, the RGB indicator flashes red rapidly to warn that the controller needs charging. If the voltage falls below 3.4V, the controller automatically shuts down.
Auto Sleep
When connected to a host, the controller enters sleep mode after 10 minutes of inactivity. (Sleep timer can be adjusted in the App.)

Cargando
Via Console Charging: Magnetically attach controllers to the sides of the Switch2 console. While the console is charging via its adapter, the controllers also charge. The RGB indicator breathes in its current color and stays solid when fully charged.
Via Controller’s USB Port Charging: Connect USB cable directly to the controller. The RGB indicator breathes red while charging and turns off when fully charged. (Note: Cannot charge via controller’s USB port while connected to a host.)
Via Center Bridge Charging: Connect a charger to the center bridge’s charging port. Both left and right charging indicators on the bridge will flash red for 0.5s, then green for 0.5s, then turn off, indicating successful self-test and standby mode. Place a controller into a charging slot; its corresponding indicator lights solid red. It turns solid green when fully charged. Removing the controller turns off its indicator.

Restablecer
If the controller malfunctions (e.g., button confusion, freeze, connection failure), try resetting it.
Method: Press and hold the HOME or Capture button for 10 seconds, or short press the SYNC button to reset the controller state.

Modo de bloqueo
Activate: With the controller off, press and hold the SL + SYNC (MODE) buttons for 5 seconds. After the RGB indicator flashes red slowly 3 times, the controller enters lock mode. Pressing any button will not wake it.
Deactivate: Connect the controller to a host magnetically or plug in a USB cable for charging. This exits lock mode, allowing wake-up via any button.

Calibración do giroscopio

Left Controller: In sleep mode, press the combo 【L + UP + CAP (Capture button)】 simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press 【-】, wait a moment to exit calibration mode. Calibration complete.
Right Controller: In sleep mode, press the combo 【R + X + HOME】 simultaneously. Enter calibration mode (RGB indicator flashes cyan slowly). Place the controller flat on a level surface/in a jig. Press 【+】, wait a moment to exit calibration mode. Calibration complete.
Alternative Method via Host: On the console, go to Settings > Controllers & Sensors > Calibrate Motion Controls, then press and hold “+” or “-“.

Calibración do joystick
After connecting to the host, go to Settings > Controllers & Sensors > Calibrate Control Sticks to calibrate the joysticks.

Actualización de firmware

1. OTA via Phone: Connect to the Key Linker App and use the OTA upgrade option in the menu.
2. Via PC Software: Start the latest firmware upgrade software on a PC. With the controller off, hold the L3 (left joystick) or R3 (right joystick) button, then connect via USB cable. Once the “Upgrade” button becomes clickable, click it to start the upgrade.
3. Firmware upgrades do not delete the controller’s saved settings.

SHININGSTARFUTURECARECO.,LTD
4D SALISBURY ROAD, WESTON-SUPER-MARE,
SOMERSET, BS22 8EW, GB
Correo electrónico: starfuturecare@163.com
Depha Gmbh
Hansestraße 88, 38112
Braunschweig, Germany
Correo electrónico: info@depha.de
Teléfono: 004953161848277

FABRICADO EN CHINA
Fabricante: Shenzhen MIKE Morgen Technology Co.,Ltd
Address: Room 302, Building 5, Zone C, Jinxiu Huacheng Park, Bantian
Rúa, distrito de Longgang, Shenzhen
Solicitante: NYXI Gaming Inc
Enderezo: 4520 Centennial Blvd NUM1004, Colorado Sorinas CO 80919
Declaración de conformidade
Modelo: NS-202
Product Code: NJ22
The product conforms to EC standards for radio interference. Here, Shenzhen MIKE Morgen Technology Co., Ltd. In Shenzhen announces that NS-202 radio equipment conforms to the Directive. EN IEC 62368-1:2020+A11:2020, EN 50663:2017, EN 62479:2010, ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), ETSI EN 300 328 V2.2.2(2019-07).
O texto completo da Declaración de conformidade da UE pódese consultar en: www.nyxigame.com

Modelo: NS-202
Este dispositivo cumpre coa parte 15 das normas da FCC. O funcionamento está suxeito ás dúas condicións seguintes: (1) Este dispositivo non pode causar interferencias prexudiciais e (2) este dispositivo debe aceptar calquera interferencia recibida, incluídas as que poidan causar un funcionamento non desexado.
Aviso da FCC:
Calquera Cambio ou modificación non aprobado expresamente pola parte responsable do cumprimento pode anular a autoridade do usuario para operar o equipo.
Nota: Este equipo foi probado e comprobouse que cumpre cos límites para un dispositivo dixital de Clase B, segundo a parte 15 das normas da FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias daniñas nunha instalación residencial. Este equipo xera usos e pode irradiar enerxía de radiofrecuencia e, se non se instala e usa de acordo coas instrucións, pode causar interferencias prexudiciais nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha determinada instalación. Se este equipo causa interferencias daniñas na recepción de radio ou televisión, o que se pode determinar acendendo e apagando o equipo, recoméndase ao usuario que intente corrixir a interferencia mediante unha ou máis das seguintes medidas:

• Reorienta ou reubica a antena receptora.
• Aumentar a separación entre o equipo e o receptor.
• Conecte o equipo a unha toma dun circuíto diferente ao que está conectado o receptor.
• Consulte ao distribuidor ou a un técnico experimentado de radio/TV para obter axuda.

O dispositivo foi avaliado para cumprir os requisitos xerais de exposición a RF.
O dispositivo pódese usar en condicións de exposición portátil sen restricións.

O símbolo significa que o produto non se debe desfacer do lixo doméstico, senón que se debe levar a un punto de recollida axeitado para permitir a súa reciclaxe. De acordo coa normativa local, non se debe desfacer do produto nin da batería recargable co lixo doméstico normal.
A eliminación adecuada dos produtos usados ​​e das baterías recargables contribúe a previr impactos negativos sobre o medio ambiente e a saúde humana.

PRECAUCIÓNS
Non o expoña a líquidos
Non o desmontes
Evite deixalo caer
Evite temperaturas extremadamente altas ou baixas

Declaración de advertencia da FCC:

Este equipo foi probado e comprobouse que cumpre cos límites para un dispositivo dixital de Clase B, segundo a parte 15 das normas da FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias daniñas nunha instalación residencial. Este equipo xera, utiliza e pode irradiar enerxía de radiofrecuencia e, se non se instala e se usa de acordo coas instrucións, pode causar interferencias prexudiciais nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha determinada instalación. Se este equipo causa interferencias daniñas na recepción de radio ou televisión, o que se pode determinar acendendo e apagando o equipo, recoméndase ao usuario que intente corrixir a interferencia mediante unha ou máis das seguintes medidas:

• Reorienta ou reubica a antena receptora.
• Aumentar a separación entre o equipo e o receptor.
• Conecte o equipo a unha toma dun circuíto diferente ao que está conectado o receptor.
• Consulte ao distribuidor ou a un técnico experimentado de radio/TV para obter axuda.

Atención: Calquera cambio ou modificación deste dispositivo non aprobado explícitamente polo fabricante pode anular a súa autorización para utilizar este equipo.
Este dispositivo cumpre coa parte 15 das normas da FCC. O funcionamento está suxeito ás dúas condicións seguintes: (1) Este dispositivo non pode causar interferencias prexudiciais e (2) este dispositivo debe aceptar calquera interferencia recibida, incluídas as que poidan causar un funcionamento non desexado.
O dispositivo foi avaliado para cumprir os requisitos xerais de exposición a RF.