TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Especificacións

• Modelo: Q103
• Compatibilidade: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Conectividade: Bluetooth, 2.4G Wireless, USB (Type-C)
• Traballo Voltage: DC 3.7 V
• Corrente de traballo: < 30 mA
• Corrente de sono: <5uA
• Vol. De cargatage/Actual: DC 5 V/500 mA

Resolución de problemas

• O controlador non se conecta:
  • Asegúrate de que o controlador estea completamente cargado.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Asegúrate de que o Bluetooth estea activado no teu dispositivo.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Botóns que non responden:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Proba o controlador nun xogo ou aplicación diferente.
• Retraso de entrada:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Minimizar as interferencias doutros dispositivos sen fíos.
  • Try connecting via USB cable if available.
• O controlador non está cargando:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Proba cun cable ou adaptador de corrente tipo C diferente.
  • The LED indicator should show the charging status.

Q103 Diagrama funcional

1. Botón D-pad
2. Botón X/Y/A/B
3. HOME Reconnect/Power Button
4. Botón PAR
5. Botón SELECCIONAR
6. Botón TURBO
7. Joystick esquerdo/botón L3
8. Joystick dereito/Botón R3
9. Botón CLEAR
10. Botón INICIO
11. Botón L
12. Botón L2
13. Porto de carga tipo C
14. Botón R2
15. Botón R.
16. Restablecer o burato
17. LED
18. Interruptor de modo

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 e superior

Conexión Bluetooth

1. Xire o interruptor: cambia a X para entrar no modo X-INPUT.
2. Primeiro uso (emparejamento de encendido):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • O LED é sempre vermello cando a reconexión se realiza correctamente.
3. Usar de novo (reconexión):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. O LED é sempre vermello cando a reconexión se realiza correctamente.
4. Press the PAIR button to power off the device.

Modo SWITCH

Conexión Bluetooth

1. Xire o interruptor: cambia a S para entrar no modo Cambiar.
2. Primeiro uso (emparejamento de encendido):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   O LED sempre está verde cando a reconexión se realiza correctamente.
3. Usar de novo (reconexión):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus para Android

Android 9.0 e superior

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Primeiro uso (emparejamento de encendido):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Usar de novo (reconexión):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Preme o botón Vincular para apagar o dispositivo.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Actualización de firmware

1. Conecta o V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Configuración do joystick

• Calibración do balancín
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Parámetros eléctricos

• Vol. De traballotage: 3.7 V CC
• Corrente de traballo: <30mA
• Corrente de sono: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Tempo de espera: 30 días (totalmente cargado)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Función de sono / espertar:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Aviso da FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorienta ou reubica a antena receptora.
• Aumentar a separación entre o equipo e o receptor.
• Conecte o equipo a unha toma dun circuíto diferente ao que está conectado o receptor.
• Consulte ao distribuidor ou a un técnico experimentado de radio/TV para obter axuda.

Atención: Calquera cambio ou modificación deste dispositivo non aprobado explícitamente polo fabricante pode anular a súa autoridade para utilizar este equipo.
Este dispositivo cumpre coa parte 15 das normas da FCC. O funcionamento está suxeito ás dúas condicións seguintes:

1. Este dispositivo pode non causar interferencias prexudiciais e
2. Este dispositivo debe aceptar calquera interferencia recibida, incluídas as que poidan causar un funcionamento non desexado.

Este equipo cumpre cos límites de exposición á radiación da FCC establecidos para un ambiente non controlado. Este equipo debe instalarse e operarse cunha distancia mínima de 0 cm entre o radiador e o seu corpo.