Weihai Printer Mainboard Module

Specific Operating Conditions

1. This product is a high-performance printer mainboard (Mainboard Module), specifically designed for printer equipment. The module integrates wireless communication functionality (Wi-Fi) and is intended to serve as a core component installed inside the printer, enabling data transmission and device control with a host computer. It supports communication with the host via USB, Ethernet, or Wi-Fi interfaces to receive print data and execute printing tasks.
2.  Professional Use Limitation: This module has professional user condition restrictions. The host product manufacturer must clearly state the warning “This product is intended for professional users only” in the product manual.
3.  Instrucións de instalación e funcionamento:
   1. Antenna installation: Remove the nut from the antenna, insert the metal end of the antenna through the mounting hole on the main control board bracket, and then reinstall the nut onto the antenna.
   2. Route the antenna through the designated hole as shown in the diagram and plug it into the main control board.
   3. Mount the main board onto the bracket and secure it using an electric screwdriver to install the following four screws (torque setting: 7 ± 0.5 kgf·cm).
   4. Attach the wireless communication module onto the metal end of the antenna.
   5. Plug the printhead harness connector into the main board, and gently bend the adapter cable at the connection end..
   6. Connect the printhead cable as illustrated.
4. Mainboard Usage Instructions
   After completing the above installation steps, toggle the rocker switch on the mainboard—the printer’s indicator light will illuminate brightly.
   The printer will automatically search for the pre-configured end-customer Wi-Fi SSID and connect to it. End users may also use the printer’s accompanying web-based utility tool to modify the Wi-Fi SSID to which the printer should automatically connect.
   Print jobs are sent to the printer via the Wi-Fi interface, and the printer executes the printing tasks accordingly.
5. Operating temperature: 5-45 ℃

Host Product Integration Labeling Instructions

1.  If the FCC Identifier (FCC ID) cannot be clearly seen after the module is installed inside the equipment, a label indicating the contained module must be affixed to the exterior of the equipment. The label format must follow “Contains FCC ID: 2BTZASRN” , complying with FCC KDB guidance 784748 labeling specifications.
2. End-user equipment must comply with the labeling requirements of §15.19. For special equipment labeling rules, please refer to §2.925, §15.19(a)(5), and related KDB documents; electronic labels must comply with §2.935 requirements.

Additional Test Requirements

Test Mode and Additional Test Requirements

1. The Original Equipment Manufacturer (OEM) integrator must ensure there are no instructions for end-users to manually remove or install this module.
2. This module is limited to installation in mobile applications. All other operating configurations (including portable configurations compliant with §2.1093 and different antenna configurations) require separate approval.
3. The host product manufacturer is ultimately responsible for performing additional compliance testing on the end product after installation of this module, including but not limited to tests related to digital device emissions, PC peripheral requirements, and other transmitters within the host.

Test Mode Software Access: Supports Wifi Test . Test items, frequency, transmit power, modulation type, and other parameters can be selected within the test script instructions.

Produto anfitrión

Host Product Manufacturer FCC Other Parts and Part 15B Compliance Requirements

1. This modular transmitter is only certified for the specific rule parts listed in the FCC grant. The host product manufacturer must ensure the host complies with other applicable FCC rules not covered by the modular transmitter certification.
2. Under all circumstances, the host product manufacturer must ensure that the host product with this module installed and operating complies with Part 15B requirements.
3. If the end product is a Class B or Class A digital device or peripheral, its user manual must prominently include the user notice statement specified in §15.105 or a similar statement:

(I) Class B Device Notice:

Nota: Este equipo foi probado e comprobouse que cumpre cos límites para un dispositivo dixital de Clase B, segundo a parte 15 das Normas da FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias prexudiciais nunha instalación residencial. Este equipo xera, utiliza e pode irradiar enerxía de radiofrecuencia e, se non se instala e se usa de acordo coas instrucións, pode causar interferencias prexudiciais nas comunicacións por radio. Non obstante, non hai garantía de que non se produzan interferencias nunha determinada instalación. Se este equipo causa interferencias daniñas na recepción de radio ou televisión, o que se pode determinar acendendo e apagando o equipo, recoméndase ao usuario que intente corrixir a interferencia mediante unha ou máis das seguintes medidas:

• Reorienta ou reubica a antena receptora.
• Aumentar a separación entre o equipo e o receptor.
• Conecte o equipo a unha toma dun circuíto diferente ao que está conectado o receptor.
• Consulte ao distribuidor ou a un técnico experimentado de radio/TV para obter axuda.

 Class A Device Notice:

Nota: Este equipo foi probado e comprobouse que cumpre cos límites para un dispositivo dixital de Clase A, segundo a parte 15 das normas da FCC. Estes límites están deseñados para proporcionar unha protección razoable contra interferencias prexudiciais cando o equipo funciona nun ambiente comercial. Este equipo xera, usa e pode irradiar enerxía de radiofrecuencia e, se non se instala e usa de acordo co manual de instrucións, pode causar interferencias prexudiciais nas comunicacións por radio. O funcionamento deste equipo nunha zona residencial é probable que cause interferencias prexudiciais, en cuxo caso o usuario terá que corrixir a interferencia pola súa conta.

Declaracións de conformidade normativa da FCC

§15.19 Declaración
Este dispositivo cumpre coa Parte 15 das normas da FCC. O funcionamento está suxeito ás dúas condicións seguintes: (1) este dispositivo non pode causar interferencias prexudiciais e (2) este dispositivo debe aceptar calquera interferencia recibida, incluídas as interferencias que poidan causar un funcionamento non desexado.
Este equipo cumpre cos límites de exposición á radiación da FCC establecidos para un ambiente non controlado. Este equipo debe instalarse e operarse cunha distancia mínima de 20 cm entre o radiador e o seu corpo.

§15.21 Información ao usuario

Aviso: Os cambios ou modificacións non aprobados expresamente pola parte responsable do cumprimento poderían anular a autoridade do usuario para operar o equipo.

Declaración de conformidade de exposición a RF
This module complies with FCC radiation exposure limits set forth for an uncontrolled environment.. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaración de conformidade con ISED
Este dispositivo contén transmisores/receptores exentos de licenza que cumpren os RSS exentos de licenza de Innovation, Science and Economic Development Canada. O funcionamento está suxeito ás dúas condicións seguintes:

1. Este dispositivo pode non causar interferencias.
2.  Este dispositivo debe aceptar calquera interferencia, incluídas as que poidan causar un funcionamento non desexado do dispositivo.

Este equipo cumpre cos límites de exposición á radiación IC RSS-102 establecidos para un ambiente incontrolado. Este equipo debe instalarse e operarse cunha distancia mínima de 20 cm entre o radiador e o seu corpo.

ISED Declaración de exposición a radiación
Este equipo cumpre cos límites de exposición á radiación IC RSS-102 establecidos para un ambiente incontrolado.
Please notice that if the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains IC: 35008-SRN”” any similar wording that expresses the same meaning may be used.

This radio transmitter [IC: 35008-SRN”] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. If you desire to increase antenna gain and either change antenna type or use same antenna type certified, a Class II permissive change application is required to be filed by us, or you (host manufacturer) can take responsibility through the change in IC ID (new application) procedure followed by a Class II permissive change application. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Applicable FCC Rules Statement

This modular transmitter complies with FCC Rules Part 15.247, 15.407.

• Restricted Module Statement
  This printer mainboard module is not a restricted module and does not require additional compliance with restricted module-related procedures.
•  Antenna Design Statement
  The antenna supplied with this module is not a microstrip antenna. Therefore, information related to microstrip antenna design layout, Bill of Materials (BOM), and isolation requirements is not required.

1. This module complies with the radiation exposure limits set by the FCC for uncontrolled environments.
2.  When this module coexists with other simultaneously operating transmitters, compliance evaluation must be conducted in accordance with the FCC multiple transmitter procedures.

Antenna Usage Instructions and Compliance Statement

Antenna Specifications and Restrictions:

This device is authorized for use only with the antenna types listed in the table below. Use of uncertified antennas or antennas with gain exceeding the specified limits is strictly prohibited..

Tipo de antena	Marca/fabricante	Modelo No.	Máx. Ganancia de antena
Antena de varilla	IOE	366W0831	2.71 dBi

RSS-247 Clause  7.3.7 Compliance Statement

Pursuant to Clause 7.3.7 of Innovation, Science and Economic Development Canada (ISED) standard RSS-247, the following declarations are made:
Antenna Replacement Restriction:

1. This device is equipped with a removable antenna connector. Users must not arbitrarily replace the antenna type or use an antenna with gain exceeding the authorized limit.
2. Liability Statement: Any unauthorized antenna replacement or modification may cause the device to exceed permissible radiation emission limits and could result in the user losing legal authorization to operate the device. Should an antenna change be required, the manufacturer must submit a Permissive Change Application.
3. Interference Warning:
   1. O dispositivo para funcionar na banda 5150-5250 MHz só se utiliza en interiores para reducir o potencial de interferencias prexudiciais para os sistemas móbiles de satélite co-canle;
   2. A ganancia de antena máxima permitida para os dispositivos nas bandas 5250-5350 MHz e 5470-5725 MHz cumprirá o límite de pire; e
   3. A ganancia de antena máxima permitida para os dispositivos na banda 5725-5825 MHz cumprirá cos límites de pire especificados para o funcionamento punto a punto e non punto a punto, segundo corresponda.

Unha lista de todos os tipos de antenas

Tipo de antena	Marca/fabricante	Modelo No.	Máx. Ganancia de antena
Antena de varilla	IOE	366W0831	2.71 dBi

FAQ

Can I use any antenna with this module?

No, this device is authorized for use only with specific antenna types mentioned in the table provided in the user manual. Using uncertified antennas or those with gain exceeding specified limits is strictly prohibited.

Documentos/Recursos

Weihai Printer Mainboard Module [pdfManual do propietario Printer Mainboard Module, Mainboard Module, Module

Referencias

• Manual de usuario